LG 60LN5400 User manual

Category
LCD TVs
Type
User manual
User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.
GP2




GP2
enga
To set favorite channels
SETTINGS CHANNEL Channel Edit
1 Select the channel you want.
2 Press the FAV button to select Favorite Group and then OK.
You can check your favorite channels by pressing the LIST button on the
remote control.
To use Favorites
Press FAV button.
You can only view the channels you set as favorite.
GP2
kor
To set up the channels automatically
SETTINGSCHANNELAuto Tuning
Memorizes automatically the channels being broadcast.
The channels will not be memorized properly if the antenna/cable is not
installed correctly.
Auto Tuning memorizes the channels that are currently being broadcast.
If Lock System is turned on, a pop-up window will appear asking for
password.
GP2
kor
To set up the channels at manually
SETTINGSCHANNELManual Tuning
Adjusts channels manually and saves the results.
For digital broadcasting, signal strength, etc. can be checked.
GP2
kor
To edit the channels
SETTINGS CHANNEL Channel Edit
Edits the saved channels.
GP2
enga
SETTINGS PICTUREAspect Ratio
Selects the screen aspect ratio.
16:9: Resizes the image ratio to fit 16:9 screen.
Just Scan: Displays the input signal without any reformatting. Recommended
for use with PC and Blu-ray player input.
Select Just Scan at the input of DTV/Component/HDMI/DVI (720P or
higher).
Set by Program: Depending on the input signal, screen aspect ratio changes
to 4:3 or 16:9
4:3: Resizes the image ratio to fit 4:3 screen.
Zoom: Resizes the image to fit the screen width. The top and bottom parts of
the image may be cut off.
Cinema Zoom: Formats an image to the cinemascope ratio (2.35:1) and zooms
in on the ratio.
GP2
enga
While viewing an external device, these cases may result in image burn:
- a video with stationary caption (such as network name)
- 4 : 3 aspect ratio mode for an extended period
Take caution when using these functions.
Available picture size may differ depending on the input signal.
At HDMI-PC or RGB-PC input, select the image ratios of 4:3 and 16:9.
(Only for models supporting PC connection)
GP2
kor
[Depending on model]
Press AV MODE button.
Optimizes the TV’s Picture/Audio for different AV modes.
Off: Views with the value set at the PICTURE/AUDIO Menu.
Cinema: Optimizes picture and audio settings for movies.
Game: Optimizes picture and audio settings for games.
GP2
kor
To adjust pictures with Picture Wizard
SETTINGS PICTURE Picture Wizard Ⅱ
This function calibrates and adjusts for optimum picture quality with the remote
control and the Picture Wizard without expensive pattern devices or help from a
specialist.
Follow the instructions on the screen to obtain the optimum picture quality.
GP2
kor
To select Picture Mode
SETTINGSPICTUREPicture Mode
Select the picture mode optimized for the viewing environment or the program.
Eco: The Energy Saver feature changes settings on the TV to reduce power
consumption.
ꕋ Expert: Menu for adjusting picture quality that allows experts and
amateurs to enjoy the best TV viewing. This menu for adjustment is provided
for ISF-certified picture tuning professionals. (ISF logo can only be used on
ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified Calibration Control
GP2
kor
Depending on input signal, available range of picture modes may differ.
ꕋ Expert mode is for picture tuning professionals to control and fine-tune
using a specific image. For normal images, the effects may not be drastic.
GP2
kor
To fine-tune picture mode
SETTINGSPICTURE Picture Mode Backlight / Contrast /
Brightness / Sharpness / Color / Tint / Color Temp.
First select a Picture Mode of your choice.
Backlight: Adjusts the display brightness by varying the brightness of the LCD
panel.
Depending on the input signal or other picture settings, the range of detailed
items for adjustment may differ.
GP2
kor
To set advanced control
SETTINGS PICTUREPicture Mode Advanced Control / Expert
Control
For each picture mode, screen can be calibrated; or for a special screen, picture
settings can be adjusted.
Select the desired Picture Mode.
Dynamic Contrast: Adjusts the contrast to the optimal level according to the
image’s brightness.
Dynamic Color: Adjusts colors to make the image appear in more natural
colors.
GP2
kor
Skin Color: Skin color spectrum can be separately set to implement the skin
color as defined by the user.
Sky Color : Sky color is set separately.
Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately
set.
Gamma: Sets the gradation curve according to the output of picture signal in
relation to the input signal.
GP2
kor
Color Gamut: Selects the range of colors that can be expressed.
Edge Enhancer: Shows clearer and distinctive yet natural edges of the video.
Expert Pattern: Patterns used for expert adjustment
Color Filter: Filters a specific color spectrum in RGB colors to fine-tune color
saturation and hue accurately.
GP2
kor
Color Temperature: Adjusts the overall tone of the screen as desired. In
Expert mode, detailed fine-tuning can be set via Gamma method, etc.
Color Management System: This system is used by experts to adjust color
with a test pattern. They can select from six color areas (Red/ Green/Blue/
Cyan/Magenta/Yellow) without affecting other colors. For normal images,
adjustments may not result in noticeable color changes.
Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
GP2
kor
To set additional picture options
SETTINGSPICTUREPicture ModePicture Option
Adjusts detailed setting for images.
Noise Reduction : Eliminates noise in the picture.
MPEG Noise Reduction : Eliminates noise generated while creating digital
picture signals.
Black Level : Adjusts the brightness and contrast of the screen to suit the
black level of the input picture by using the blackness (black level) of the
screen.
GP2
kor
Real Cinema : Helps keep the screen in optimal condition.
Motion Eye Care : [Depending on model] Saves power consumption by
adjusting the brightness corresponding to the movement of the image on the
screen.
Depending on input signal or other picture settings, the range of detailed
items for adjustment may differ.
GP2
kor
To initialize picture settings
SETTINGSPICTUREPicture ModePicture Reset
Initializes picture settings that the user customizes.
Each picture mode is reset. Select the desired picture mode to reset.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86

LG 60LN5400 User manual

Category
LCD TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI