Samsung DSB-H670 Owner's manual

H670N_VIA_EN-cover-final.indd 1 2007-12-11 오전 9:19:25

Page is loading ...

T

E

33

DSB-H670N

LITMOTTAGARE

SWE

TEKNISKA SPECIFIKATIONER

Strömförsörjning

Ingångsspänning: AC 230V~, 50 Hz

Säkring:

250 V/T1.6AH

Tuner

Frek. område: 950 ~ 2150 MHz

Ingångssignalnivå: -65 ~ -25 dBm

Typ av anslutning: F-kontakt hona

LNB strömreglering: 13 V/18 V, 22 kHz ton

DiSEqC: 1.0 stöds 2 positioner stöds

Demodulator

Typ: QPSK-demodulation (DVB-S, DVB-S2),

8-PSK (DVB-S2)

Symbolhastighet: 1~45Ms/s

Inre FEC: Viterbi Convolution

Kodningshastighet (DVB-S) - 1/2,2/3,3/4,5/6,7/8

Kodningshastighet (DVB-S2) -1/2, 3/5, 2/3, 3/4, 4/5,

5/6, 8/9, 9/10

Yttre FEC: Reed Solomon Coding (204,188), t = 8

Videodekoder

Systemavkodning: MPEG 2 MP@ML, MPEG4 (H.264)

Datahastighet: 1~ 15 Mb/s

Videoformat: 4:3 (normal) & 16:9 (widescreen)

Bildupplösning: SCART: 576i

HDMI/Component: 576p, 720p, 1080i,

Ljuddekoder

Systemavkodning: MPEG1 ISO/IEC 11172~3 lager I &II, Dolby

Digitalljudläge: mono, dual, stereo, joint stereo

Samplingsfrekvens: 32, 44.1, 48 kHz

A/V-utgång

Gränssnitt: 2 SCART (TV, VCR), HDMI, Optical Audio (SPDIF).

SD: TV SCART, VCR SCART

HD: HDMI

SPDIF: Optisk ljudutgång

Fysiska specifikationer

Storlek (B x D x H): 270 x 200 x 40 mm

Vikt (netto): 1,21 kg

01-H670N_VIA_SWE.indd 3301-H670N_VIA_SWE.indd 33 2007-12-10 오후 8:28:432007-12-10 오후 8:28:43

Page is loading ...

E L

33

DSB-H670N

L I T M O D T A G E R

DAN

TEKNISKE SPECIFIKATIONER

Strømforsyning

Netspænding: AC 230V~, 50 Hz

Sikring: 250 V/T1.6AH

Tuner

Frekv. Område: 950 ~ 2150 MHz

Indgangssignalniveau: -65 ~ -25 dBm

Stiktype: F-type hun

LNB-styring: 13 V, 18 V, 22 kHz

DiSEqC: 1.0 2 positioner er understøttet

Demodulator

Type: QPSK Demodulation (DVB-S, DVB-S2),

8-PSK (DVB-S2)

Symbolhastighed: 1~45Ms/s

Indre FEC: Viterbi Convolution

Kodningshastighed (DVB-S) - 1/2,2/3,3/4,5/6,7/8

Kodningshastighed (DVB-S2) -1/2, 3/5, 2/3, 3/4, 4/5

, 5/6, 8/9, 9/10

Ydre FEC: Reed Solomon-kodning (204,188), t = 8

Videodekoder

Systemdekodning: MPEG 2 MP@ML, MPEG4 (H.264)

Datahastighed: 1~ 15 Mb/s

Videoformater: 4:3 (normal) & 16:9 (bredsformat)

Billedopløsning: SCART: 576i

HDMI/Komponent: 576p, 720p, 1080i,

Lyddekoder

Systemdekodning: MPEG1 ISO/IEC 11172~3 layer I &II, Dolby

DigitalLydtilstand: mono, dual, stereo, joint stereo

Samplingsfrekvens: 32, 44.1, 48 kHz

A/V output

Interface: 2 SCART (TV, VCR), HDMI, Optical Audio (SPDIF).

SD: TV SCART, VCR SCART

HD: HDMI

SPDIF: Optical Audio output

Fysiske Specifikationer

Størrelse (B x D x H): 270 x 200 x 40 mm

Vægt (Netto): 1.21 Kg

02-H670N_VIA_DAN.indd 3302-H670N_VIA_DAN.indd 33 2007-12-10 오후 8:34:152007-12-10 오후 8:34:15

Page is loading ...

L

33

DSB-H670N

L I T T M O T T A K E R

NOR

TEKNISKE SPESIFIKASJONER

Strømforsyning

Inngangsspenning: AC 230V~, 50 Hz

Sikringsstørrelse: 250 V/T1.6AH

Tuner

Frek. område: 950 ~ 2150 MHz

Inngangsnivå: -65 ~ -25 dBm

Tilkoblingstype: F-type, hunn

LNB strømstyring: 13 V/18 V, 22 kHz-tone

DiSEqC: 1.0 Støtter 2 posisjoner

Demodulator

Type: QPSK Demodulasjon (DVB-S, DVB-S2),

8-PSK (DVB-S2)

Symbolhastighet: 1~45Ms/s

Innvendig feilkorreksjon: Viterbi Convolution

Kodingshastighet(DVB-S) - 1/2,2/3,3/4,5/6,7/8

Kodingshastighet (DVB-S2) -1/2, 3/5, 2/3, 3/4, 4/5,

5/6, 8/9, 9/10

Utvendig feilkorreksjon: Reed Solomon-koding (204,188), t = 8

Video-dekoder

System-dekoding: MPEG 2 MP@ML, MPEG4 (H.264)

Datahastighet: 1~ 15 Mb/s

Videoformater: 4:3 (normal) & 16:9 (bredskjerm)

Bildeoppløsning: SCART: 576i

HDMI/komponent: 720p, 1080i,

Audio-dekoder

System-dekoding: MPEG1 ISO/IEC 11172~3 layer I &II, Dolby

DigitalAudio-modus: mono, dual, stereo, joint stereo

Samplingsfrekvens: 32, 44.1, 48 kHz

A/V-utgang

Grensesnitt: 2 SCART (TV, VCR), HDMI, Optical Audio (SPDIF).

SD: TV SCART, VCR SCART

HD: HDMI

SPDIF: Optisk lydutgang

Fysiske spesifikasjoner

Størrelse (B x D x H): 270 x 200 x 40 mm

Vekt (netto): 1,21 Kg

03-H670N_VIA_NOR.indd 3303-H670N_VIA_NOR.indd 33 2007-12-10 오후 8:45:582007-12-10 오후 8:45:58

Page is loading ...

2

DSB-H670N

D I G I T A L S A T E L L ID I G I T A L S A T E L L I

SAFETY INSTRUCTIONS

This receiver has been manufactured to satisfy international safety standards.

Please read the following recommended safety precautions carefully.

MAINS SUPPLY: AC 230V~, 50Hz

OVERLOADING:

Do not overload wall outlets, extension cords or adapters as this can result in

fire or electrical shock.

LIQUIDS:

Keep liquids away from the

receiver. Apparatus shall not be exposed to

dropping or splashing and no objects filled with liquids, such as vases,

shall be placed on the apparatus.

CLEANING:

Before cleaning, disconnect the receiver from the wall socket.

Use a cloth lightly dampened with water (no solvents) to clean the exterior.

VENTILATION:

Do not block the receiver ventilation holes. Ensure that free airflow is

maintained

around the

receiver. Never store the receiver where it is exposed to direct

sunlight or near heating equipment e.g. a radiator. Never stack other electronic

equipment on top of the receiver. Place the receiver at least 30mm from the

wall.

USAGE TEMPERATURE:

The

receiver must not be used in the temperature exceeding 35 ºC.

In order to ensure proper functioning of the

receivers over many years it is

recommended to use the receivers in the ambient temperature not exceeding

25 ºC.

ATTACHMENTS:

Do not use any attachment that is not recommended by the manufacturer;

it may cause a hazard or damage the equipment.

CONNECTION TO THE CABLE TV SIGNAL AND TV:

Connect all components before plugging any power cords into the wall outlet.

Always turn off the receiver, TV and other components before you connect or

disconnect any cables.

FAILURE TO DO SO COULD DAMAGE THE LNB.

SERVICING:

Do not attempt to service this product yourself. Any attempt to do so will make

the warranty invalid. Refer all servicing to a qualified service agent.

LIGHTNING:

If the receiver is installed in an area subject to intense lightning activity,

protection devices for the

receiver mains connector are essential. The individual

manufacturer’s instruction for safeguarding other equipment, such as TV set,

Hi-Fi, etc., connected to the receiver must also be followed during lightning

storms.

GROUNDING:

The ground of the LNB cable must be directly connected to the system ground

for the satellite dish. The grounding system must comply with local regulations.

05-H670N_VIA_EN.indd 205-H670N_VIA_EN.indd 2 2007-12-27 오후 5:43:452007-12-27 오후 5:43:45

E L L I T E R E C E I V E R

3

E L L I T E R E C E I V E R

DSB-H670N

GB

SAFETY INSTRUCTIONS

WARNING!

1. Follow these directions in order not to damage the power cord or plug.

●

Do not modify or process the power cord or plug arbitrarily.

●

Do not bend or twist the power cord too much.

●

Make sure to disconnect the power cord with holding the plug.

●

Separate heat appliances from the power cord as distance as possible in order to prevent

the cover from being melted.

2. Failure to follow one of them may cause electrical shock.

●

Do not open the main body.

●

Do not insert metals or inflammable objects inside the product.

●

Do not touch the power plug with a wet hand.

●

Disconnect the power cord in case of lightning.

●

Do not cover the receiver’s ventilation openings with items such as newspapers, clothes etc.

●

Do not place the receiver on top of household appliances that emit heat.

3.

Do not use the product when it is out of order. If you continue to use the product

with a defect, it can cause a serious damage to the product. Make sure to contact

your local product distributor when the product is out of order.

4.

The Mains plug is used as a disconnect device and shall stay readily operable at

any time. To disconnect the apparatus from the AV mains, the plug must be pulled

out from the mains socket, therefore the mains plug shall be readily operable.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other

European countries with separate collection systems)

This marking shown on the product or its literature, indicates

that it should not be disposed with other household wastes

at the end of its working life. To prevent possible harm to

the environment or human health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it responsibly to promote

the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract. This product should not be mixed with

other commercial wastes for disposal.

05-H670N_VIA_EN.indd 305-H670N_VIA_EN.indd 3 2007-12-27 오후 5:43:452007-12-27 오후 5:43:45

4

DSB-H670N

D I G I T A L S A T E L L I

CONTENTS

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Updates to your

receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

The supplied equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote Control Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Where to Place Your

receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting Your

receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

First Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Operating The Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1. TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1.1 All Channel Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1.2 Channel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

1.3 Program Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2. Ticket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3. Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4. Planner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5. Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1 Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1.1 Channel Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1.2 Control Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.1.3 Change PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.2 User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.2.1 Language Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.2.2 Banner & Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.2.3 Screensaver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.3 System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.3.1 Default Transponder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.3.2 LNB Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.3.3 SCART Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.3.4 Resolution Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.3.5 TV Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.3.6 Audio Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.3.7 Modem Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.3.8 Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.4

Receiver info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.5 Signal Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting Up The Remote Control For Your TV. . . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

05-H670N_VIA_EN.indd 405-H670N_VIA_EN.indd 4 2007-12-27 오후 5:43:462007-12-27 오후 5:43:46

E

L

5

DSB-H670N

GB

L I T E R E C E I V E R

1. USER SECTION

DIGITAL HD/SDTV BROADCASTING RECEPTION

ADVANCED ELECTRONIC

PROGRAMME GUIDE

MULTI LANGUAGE SUPPORTED

TELETEXT

FULL FUNCTION INFRARED REMOTE CONTROL UNIT

TRANSPONDER and SELECTIVE SCAN FACILITY

SCART OUTPUT

LOW POWER CONSUMPTION

AUTO UPDATED EPG

PASS LOOP FOR RGB SIGNAL

2. TUNER SECTION

950~2150 MHz WIDE BAND TUNER

1~45 MS/s SYMBOL RATE

DiSEqC 1.0 (2 POSITIONS)

13 V, 18 V, 22 kHz

3. VIDEO SECTION

DVB-S, DVB-S2 Compliant

MPEG-2 Video (MP@ML), MPEG-4 Video (H.264)

SUPPORTS ASPECT RATIO 4:3 (NORMAL) AND 16:9

(WIDE SCREEN)

4. AUDIO SECTION

MPEG-1 AUDIO LAYER I & II

MONO, DUAL, STEREO AND JOINT STEREO AUDIO MODE

32, 44.1 AND 48 kHz SAMPLING FREQUENCIES

VOLUME CONTROL AND MUTE FUNCTION ON YOUR TV

(See page 30)

SPDIF DIGITAL AUDIO OUTPUT

DOLBY DIGITAL

DOLBY DIGITAL PLUS

GENERAL FEATURES

05-H670N_VIA_EN.indd 505-H670N_VIA_EN.indd 5 2007-12-27 오후 5:43:472007-12-27 오후 5:43:47

6

DSB-H670N

D I G I T A L S A T E L L I

Welcome

Thank you for choosing the Viasat HD Zapper box for viewing your Viasat channel packages.

Please follow the instructions in this User Guide carefully to enjoy all the advantages of digital

satellite TV. Your receiver fully complies with international Digital Video Broadcasting (DVB)

standards. When the mains supply has been connected you have to wait approximately

1 minute until you can start to use your box.

Updates to your receiver

From time to time, your receiver may be updated. These updates provide enhanced features:

new screens and menus may become available. Although any new screens and menus may look

a little bit different from those described in this User Guide, you should be able to use the same

techniques (e.g. highlight and select) with them. Updates will usually happen in the middle of the

night. Your receiver needs to be in standby to receive updates.

05-H670N_VIA_EN.indd 605-H670N_VIA_EN.indd 6 2007-12-27 오후 5:43:482007-12-27 오후 5:43:48

E

L

7

DSB-H670N

GB

L I T E R E C E I V E R

The supplied equipment

You should have the following items in your package:

● Viasat HD Zapper box (see picture below and page 8-9)

● Remote control and batteries (see picture below and page 10-12)

● User Guide and Quick Start Guide (see picture below) .

● SCART cable (see picture below)

● HDMI cable (see picture below)

● Ethernet cable (see picture below)

● Telephone cable - RJ11 to RJ 11 (see picture below)

● Telephone line (RJ11) adapter suitable for your location (see picture below and page 15).

Viasat HD Zapper box

Batteries type AA

User guide

SCART cable

HDMI cable

Ethernet cable

for future use

Telephone cable

Quick Start Guide

Telephone line

(RJ11) adapter

Remote Control Unit

05-H670N_VIA_EN.indd 705-H670N_VIA_EN.indd 7 2007-12-27 오후 5:43:492007-12-27 오후 5:43:49

8

DSB-H670N

D I G I T A L S A T E L L ID I G I T A L S A T E L L I

DESCRIPTION

Front Panel

1. To turn the receiver on and off (Standby).

2. STANDBY Blue LED for Standby On / Off (Standby : LED On)

3. CH+/CH- To change the channels.

4. INFO Displays Info bar.

5. Infrared Sensor To receive the IR commands from the Remote Control Unit.

6. Card Slot To insert your smart card.

STANDBY

1

3

2

4 5

6

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

05-H670N_VIA_EN.indd 805-H670N_VIA_EN.indd 8 2007-12-27 오후 5:45:172007-12-27 오후 5:45:17

E L L I T E R E C E I V E R

9

E L L I T E R E C E I V E R

DSB-H670N

GB

DESCRIPTION

1

3

2

5

4

6

7

8

Rear Panel

1. DISH INPUT To connect the coaxial cable from LNB of your dish.

2. USB USB 2.0 for future services and accessories.

3. ETHERNET Internet connection. (For future use).

4. HDMI OUT

Use the HDMI cable to connect this jack on your HDTV for the best

quality picture.

5. TV SCART This is for connecting to your SDTV.

6. AUX SCART Connect to your VCR or other equipment.

7. PHONE This is for connecting to your telephone line or modem.

8. DIGITAL AUDIO OUT OPTICAL

Optical output for connection to an external Audio system.

05-H670N_VIA_EN.indd 905-H670N_VIA_EN.indd 9 2007-12-27 오후 5:45:202007-12-27 오후 5:45:20

10

D I G I T A L S A T E L

DSB-H670N

L I

DESCRIPTION

Remote Control Unit

NoteNote

:

When inserting batteries, make sure that the polarity (+/-) is correct.

Do not use old batteries with new ones.

Please replace batteries with new two designated standard ones.

Please keep a remote control without batteries when you do not use it for long period.

05-H670N_VIA_EN.indd 1005-H670N_VIA_EN.indd 10 2007-12-27 오후 5:45:212007-12-27 오후 5:45:21

E

L

11

L I T E R E C E I V E R

DSB-H670N

GB

DESCRIPTION

1. VIASAT This key takes you to last viewed TV-channel.

2. TV TV release.

3. VOD This key is used to activate Video on Demand (VOD) menu.

4. EPG Displays the on-screen Electronic

Programme Guide (EPG).

5.

Displays the Info banner.

6.

VOL+/VOL- These keys are used to increase or decrease the volume on the TV.

7. BACK

Tunes to previous channel whilst in full screen video and returns to previous

screen while in EPG feature.

8. SETUP Launches System Setup.

9. Color key (RED, GREEN, YELLOW, BLUE)

Used to select special operation for the

EPG.

10.

0-9 Numeric key Enters numeric value.

11. (

POWER)

Puts the receiver in stand-by mode (no signal to TV).

12. TICKET Displays the Tickets menu.

13. PLANNER Launches the Planner.

14. EXIT Clears on-screen displays and return to

programme viewing.

15. CH+/CH- Press to change the channel.

16. Arrow (

) Move the highlight bar for selecting options on the menu.

OK Enter and confirm any data to the receiver in the menu system.

17. MUTE (

)

This key is used to toggle between normal & muted audio on the TV.

18. OPTIONS Launch the Language & Subtitle banner.

NoteNote

: For information on setting up your remote control to operate your TV, see page 30 - 31.

05-H670N_VIA_EN.indd 1105-H670N_VIA_EN.indd 11 2007-12-27 오후 5:45:232007-12-27 오후 5:45:23

12

D I G I T A L S A T E L L I

DSB-H670N

D I G I T A L S A T E L L I

DESCRIPTION

Inserting the batteries in your remote control

Before you can use your remote control, you must insert the two supplied AA batteries as follows:

1.

Push the catch at the bottom of the remote control battery cover up, then lift off the cover.

2.

Insert the two batteries as shown below, be sure to match the + and - marks on the batteries to

their respective marks inside the batteries compartment.

3.

Replace the battery cover, by inserting the tab at the top of the cover first, then pushing the

cover into place.

Do not leave flat batteries in your remote control. Replace both batteries in the same time.

Do not dispose of used batteries with your domestic rubbish.

Used batteries should be recycled at the end of their useful life.

Where to place your receiver

Please make sure that your TV, VCR and receiver will be placed in a location that is conveniently

located.

• Near an easily-accessible mains wall socket.

• Within reach of your satellite-dish leads

• Within 10 metres of a telephone point (if not, you will need an extension telephone lead)

05-H670N_VIA_EN.indd 1205-H670N_VIA_EN.indd 12 2007-12-27 오후 5:45:242007-12-27 오후 5:45:24

E L L I T E R E C E I V E R

13

DSB-H670N

GB

E L L I T E R E C E I V E R

CONNECTING YOUR RECEIVER

After installing your antenna, connect the

coaxial cable from the LNB to "DISH INPUT"

on the back of your receiver.

All cable connectors should be finger

tightened; do not use any kind of wrench

while tightening connectors.

Connect your receiver to the antenna

1.

Connect the supplied SCART cable between

TV SCART connector on the receiver and

SCART connector on the TV

2.

If you want to connect your receiver to a TV

and a VCR at the same time you must use an

additional SCART cable. Connect a SCART

cable between the VCR and the SCART

connector marked AUX (on the receiver).

NoteNote

:

If degraded picture quality is observed

while viewing copy-protected PPV

programmes, connect the receiver directly

to the television. Do not connect through

VCR.

Standard-definition connection (SCART)

05-H670N_VIA_EN.indd 1305-H670N_VIA_EN.indd 13 2007-12-27 오후 5:45:252007-12-27 오후 5:45:25

14

D I G I T A L S A T E L

DSB-H670N

L I

CONNECTING YOUR “RECEIVER”

Connect a HDMI cable between the HDMI OUT

jack on the

receiver and the HDMI IN jack

on the HDMI device (TV, Monitor).

NoteNote

: -

It can not work if you use non-standard cable

or can not operate depending on cable length

causing limit to operation or function.

-

Screen image can not be displayed if you

connect HDMI to TV or monitor that is not

supported by HDCP.

-

If you use only an HDMI™ lead to connect

your box to your HDTV,you will not be able to

use any teletext services.

There are many types of audio systems on the

market today.

A simplified illustration of an audio system is

shown to the right. For more information, see

your audio system owner’s manual.

For an optical digital audio input, connect the

audio system to the DIGITAL AUDIO (OPTICAL)

connector on the

receiver.

Audio Rear Panel

High-definition connection (HDMI)

Connect to an external audio system

05-H670N_VIA_EN.indd 1405-H670N_VIA_EN.indd 14 2007-12-27 오후 5:45:272007-12-27 오후 5:45:27

E

L

15

L I T E R E C E I V E R

DSB-H670N

GB

CONNECTING YOUR “RECEIVER”

●

Insert one end of the supplied telephone lead into

the telephone socket (labeled PHONE) on the rear

panel of your receiver.

●

Choose the correct adapter for your location. If you

are not sure which one to use, compare with your

telephone connector. Insert the free end of your

supplied telephone lead into the RJ11 socket on

the adapter.

●

Remove your telephone connector from your

telephone wall socket. Insert your telephone

connector into the correct socket on youre adapter.

Insert the adapter into your telephone wall socket.

NoteNote

:

If your telephone wall socket is an RJ11 socket

(shown right), you may need a splitter (not

supplied) so that you can plug in both your

receiver and your telephone.

Insert the smartcard with the Viasat logo facing

upwards and the gold chip downwards and in.

Taking care of your smart card

●

Do not remove and re-insert your smart card

unnecessarily.

●

Do not bend your smart card; keep it away from

children and pets.

●

Do not put your smart card in liquids or use

cleaning fluids on it.

NoteNote

:

If you are an existing Viasat customer please remove the smart card from your old receiver

and insert it into your new receiver. If you are a new customer and if the smart card is not

included in the package it will arrive in a separate delivery within a week.

After you have safely made all the other connections you can connect your main receiver to the

mains supply.

NoteNote

:

DO NOT connect to the mains plug to the wall socket until you have made ALL the other

connections.

Connecting to the telephone line

Inserting the smartcard

Connecting to the mains supply

05-H670N_VIA_EN.indd 1505-H670N_VIA_EN.indd 15 2007-12-27 오후 5:45:282007-12-27 오후 5:45:28

16

DSB-H670N

D I G I T A L S A T E L L ID I G I T A L S A T E L L I

FIRST INSTALLATION SETUP

Before you can view the television programme, you must perform the first installation.

Please make sure your TV is switched on.

1. Country

● Press the / to choose your preferred country.

● Press the OK key to confirm and move to the next screen.

NoteNote

: This selection determines the default menu language.

The next screens will have default settings. In general you don’t have to change any

default settings. Please press the OK key to use the receiver's default settings or press

the BACK key to return to the previous screen. If you want to change specific settings on

a setup screen these can be done at this installation or later on, see page 25-27.

If “First Installation Setup” is successful the TV channel on channel position 3 appears

on your TV. If there is no signal, check your installation. Check all the connections are

properly made. See also Troubleshooting on page 32.

2. LNB Setup

● Press the / key to select between setup items.

●

Press the / key to select “LNB type” and “Number of LNBs”.

● Press the OK key to confirm and move to the next screen.

● Press the BACK key to go to previous screen.

NoteNote

: If more than one receiver are to be connected to the

same SATCR LNB, already installed receivers/s has

to be disconnected from the wall socket. When the new

receiver has been installed,

Previously disconnected

boxes can then be powered up again.

05-H670N_VIA_EN.indd 1605-H670N_VIA_EN.indd 16 2007-12-27 오후 5:45:302007-12-27 오후 5:45:30

E L L I T E R E C E I V E R

17

E L L I T E R E C E I V E R

DSB-H670N

GB

FIRST INSTALLATION

3. Default Transponder

● Enter Frequency:

Press the numeric (0-9) key to enter the frequency.

● Select Polarization: Press the / key to select “Vertical” or

“horizontal”.

● Enter Symbol Rate: Press the numeric (0-9) key to enter the

Symbol Rate

● Select FEC: Press the / key to select FEC (1/2, 2/3, 3/4,

5/6 or 7/8)

Press the OK key to confirm and move to the next screen.

Press the BACK key to go to previous screen.

4. Signal Test

After the signal setup there will be signal test screen showing

Lock status on Home transponder.

If "Front end locked" says "Yes" it means that the receiver

has locked to signal from the satellite. If it says "No", and the

"POWER" and "Signal Quality" bars are 0%, you need to check

your antenna alignment.

● Press the OK key to confirm and move to the next screen.

The locked channel will be displayed.

● Press the BACK key to go to previous screen.

5. HD TV Setup

If your receiver is connected to the HD TV with HDMI cable,

the resolution setting screen will be displayed.

The optimal resolution for your combination of TV-set and

receiver will be highlighted as default. If you want to select

another resolution move the cursor with the / and press the

OK key to select.

05-H670N_VIA_EN.indd 1705-H670N_VIA_EN.indd 17 2007-12-27 오후 5:45:322007-12-27 오후 5:45:32

Page is loading ...

Samsung DSB-H670 Owner's manual

Samsung DSB-H670 Owner's manual

in other languages

Related papers

Other documents