Sony BDP-S6700 Operating instructions

Brand: Sony

Model: BDP-S6700

Category: Blu-Ray players

Type: Operating instructions

Getting Started

Playback

Settings and Adjustments

Additional Information

BDP-S6700

4-579-668-34(1)

Blu-ray Disc™ /

DVD Player

Operating Instructions

Thank you for your purchase. Before using this

player, please read these instruction carefully.

WARNING

To reduce the risk of fire or electric shock, do not

expose this appliance to dripping or splashing,

and do not place objects filled with liquids, such

as vases, on the appliance.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

The AC power cord (mains lead) must be changed

only at a qualified service shop.

Do not expose batteries or appliances with

battery-installed to excessive heat, such as

sunshine and fire.

CAUTION

The use of optical instruments with this product

will increase eye hazard. As the laser beam used

in this Blu-ray Disc/DVD player is harmful to

eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

This label is located on the laser protective

housing inside the enclosure.

For customers in Singapore

Precautions

• The nameplate is located on the bottom of the

unit.

• This unit operates on 110 V - 240 V AC,

50/60 Hz. Check that the unit’s operating

voltage is identical with your local power

supply.

• Install this unit so that the AC power cord

(mains lead) can be unplugged from the wall

socket immediately in the event of trouble.

Precautions

This equipment has been tested and found to

comply with the limits set out in the EMC

Directive using a connection cable shorter

than 3 metres.

On placement

• Place the player in a location with adequate

ventilation to prevent heat build-up in the

player.

• To reduce the risk of fire, do not cover the

ventilation opening of the appliance with

newspapers, tablecloths, curtains, etc.

• Do not expose the appliance to naked flame

sources (for example, lighted candles).

• Do not install this player in a confined space,

such as a bookshelf or similar unit.

• Do not place the player outdoors, in

vehicles, on ships, or on other vessels.

• If the player is brought directly from a cold

to a warm location, or is placed in a very

damp room, moisture may condense on the

lenses inside the player. Should this occur,

the player may not operate properly. In this

case, remove the disc and leave the player

turned on for about half an hour until the

moisture evaporates.

• Do not install the player in an inclined

position. It is designed to be operated in a

horizontal position only.

• Do not place metal objects in front of the

front panel. It may limit reception of radio

waves.

• Do not place the player in a place where

medical equipment is in use. It may cause a

malfunction of medical instruments.

• If you use a pacemaker or other medical

device, consult your physician or the

manufacturer of your medical device before

using the wireless LAN function.

• This player should be installed and operated

with a minimum distance of at least 20 cm or

more between the player and a person’s

body (excluding extremities: hands, wrists,

feet and ankles).

Complies with

IMDA Standards

DB00353

• Do not place heavy or unstable objects on

the player.

• Do not place any objects other than discs on

the disc tray. Doing so may cause damage to

the player or the object.

• Take out any discs from the tray when you

move the player. If you don’t, the disc may

be damaged.

• Disconnect the AC power cord (mains lead)

and all other cables from the player when

you move the player.

On power sources

• The player is not disconnected from the AC

power source (mains) as long as it is

connected to the wall outlet, even if the

player itself has been turned off.

• Disconnect the player from the wall outlet if

you are not going to use the player for a long

time. To disconnect the AC power cord

(mains lead), grasp the plug itself; never pull

the cord.

• Observe following points to prevent the AC

power cord (mains lead) being damaged. Do

not use the AC power cord (mains lead) if it

is damaged, as doing so may result in an

electric shock or fire.

– Do not pinch the AC power cord (mains

lead) between the player and wall, shelf,

etc.

– Do not put anything heavy on the AC

power cord (mains lead) or pull on the AC

power cord (mains lead) itself.

On AC adaptor

• Use the supplied AC adaptor for this player,

as other adaptors may cause a malfunction.

• Do not disassemble or reverse-engineer.

• Do not confine the AC adaptor in a closed

place such as a bookshelf or an AV cabinet.

• Do not connect the AC adaptor to a

traveler’s electric transformer, which may

generate heat and cause a malfunction.

• Do not drop or apply shock.

On adjusting volume

Do not turn up the volume while listening to a

section with very low level inputs or no audio

signals. Your ears and the speakers may be

damaged when the sound level reaches the

peak.

On cleaning

Clean the cabinet, panel, and controls with a

soft cloth. Do not use any type of abrasive pad,

scouring powder or solvent such as alcohol or

benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners

(including wet or spray types). These may

cause the apparatus to malfunction.

On replacement of parts

In the events that this player is repaired,

repaired parts may be collected for reuse or

recycling purposes.

On connecting to the HDMI OUT jack

Observe the following as improper handling

may damage the HDMI OUT jack and the

connector.

• Carefully align the HDMI OUT jack on the

rear of the player and the HDMI connector

by checking their shapes. Make sure the

connector is not upside down or tilted.

• Be sure to disconnect the HDMI cable when

moving the player.

• Hold the HDMI connector straight when

connecting or disconnecting the HDMI

cable. Do not twist or force the HDMI

connector into the HDMI OUT jack.

On watching 3D video images

Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while

watching 3D video images. Sony recommends

that all viewers take regular breaks while

watching 3D video images. The length and

frequency of necessary breaks will vary from

person to person. You must decide what works

best. If you experience any discomfort, you

should stop watching the 3D video images

until the discomfort ends; consult a doctor if

you believe necessary. You should also

review (i) the instruction manual and/or the

caution message of any other device used

with, or Blu-ray Disc contents played with this

product and (ii) our website

(http://www.sony-asia.com/support/) for the

latest information. The vision of young

children (especially those under six years old)

is still under development. Consult your

doctor (such as a pediatrician or eye doctor)

before allowing young children to watch 3D

video images.

Adults should supervise young children to

ensure they follow the recommendations

listed above.

If you have any questions or problems

concerning your player, please consult your

nearest Sony dealer.

Copy Protection

Please be advised of the advanced content

protection systems used in both Blu-ray

Disc™ and DVD media. These systems,

called AACS (Advanced Access Content

System) and CSS (Content Scramble System),

may contain some restrictions on playback,

analogue output, and other similar features.

The operation of this product and the

restrictions placed may vary depending on the

date of purchase, as the governing board of the

AACS may adopt or change its restriction

rules after the time of purchase.

Cinavia Notice

This product uses Cinavia technology to limit

the use of unauthorized copies of some

commercially-produced film and videos and

their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will

be displayed and playback or copying will be

interrupted.

More information about Cinavia technology is

provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com.

To request additional information about

Cinavia by mail, send a postcard with your

mailing address to: Cinavia Consumer

Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

Copyrights and Trademarks

• Java is a trademark of Oracle and/or its

affiliates.

• Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

IMPORTANT NOTICE

Caution: This player is capable of holding

a still video image or on-screen display

image on your television screen

indefinitely. If you leave the still video

image or on-screen display image

displayed on your TV for an extended

period of time you risk permanent damage

to your television screen. Plasma display

panel televisions and projection

televisions are susceptible to this.

• For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS

Licensing Limited. DTS, the Symbol, &

DTS and the Symbol together are registered

trademarks, and DTS 2.0+Digital Out is a

trademark of DTS, Inc. © DTS, Inc. All

Rights Reserved.

• The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered

trademarks of HDMI Licensing

Administrator, Inc. in the United States and

other countries.

• Blu-ray Disc™, Blu-ray™, BD-LIVE™,

BONUSVIEW™, and the logos are

trademarks of the Blu-ray Disc Association.

• Blu-ray 3D™ and Blu-ray 3D™ logo are

trademarks of the Blu-ray Disc Association.

• “DVD Logo” is a trademark of

DVD Format/Logo Licensing Corporation.

• “DVD+RW,” “DVD-RW,” “DVD+R,”

“DVD-R,” “DVD VIDEO,” “Super Audio

CD,” and “CD” logos are trademarks.

• “BRAVIA” is a trademark of Sony

Corporation.

• MPEG Layer-3 audio coding technology

and patents licensed from Fraunhofer IIS

and Thomson.

• This product incorporates proprietary

technology under license from Verance

Corporation and is protected by U.S. Patent

7,369,677 and other U.S. and worldwide

patents issued and pending as well as

certain aspects of such technology. Cinavia

is a trademark of Verance Corporation.

engineering or disassembly is prohibited.

• Windows Media is either a registered

trademark or trademark of Microsoft

Corporation in the United States and/or

other countries.

This product is protected by certain

intellectual property rights of Microsoft

Corporation. Use or distribution of such

technology outside of this product is

prohibited without a license from Microsoft

or an authorized Microsoft subsidiary.

Content owners use Microsoft PlayReady™

content access technology to protect their

intellectual property, including copyrighted

content. This device uses PlayReady

technology to access PlayReady-protected

content and/or WMDRM-protected content.

If the device fails to properly enforce

restrictions on content usage, content

owners may require Microsoft to revoke the

device’s ability to consume PlayReady-

protected content. Revocation should not

affect unprotected content or content

protected by other content access

technologies. Content owners may require

you to upgrade PlayReady to access their

content. If you decline an upgrade, you will

not be able to access content that requires

the upgrade.

•Wi-Fi

, Wi-Fi Protected Access

, Wi-Fi

Alliance

and Miracast

are registered

trademarks of Wi-Fi Alliance.

• Wi-Fi CERTIFIED™, WPA™, WPA2™,

Wi-Fi Protected Setup™ and Wi-Fi

CERTIFIED Miracast™ are trademarks of

Wi-Fi Alliance.

• The Wi-Fi CERTIFIED Logo is a

certification mark of Wi-Fi Alliance.

• The Wi-Fi Protected Setup Identifier Mark

is a certification mark of Wi-Fi Alliance.

• DLNA™, the DLNA Logo and DLNA

CERTIFIED™ are trademarks, service

marks, or certification marks of the Digital

Living Network Alliance.

• The Bluetooth

word mark and logos are

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other

trademarks and trade names are those of

their respective owners.

• LDAC™ and LDAC logo are trademarks of

Sony Corporation.

• “ ”, “PlayStation” and “DUALSHOCK”

are trademarks of Sony Computer

Entertainment Inc.

• Google Play is a trademark of Google LLC.

• Apple is a trademark of Apple Inc.,

registered in the U.S. and other countries.

• The Spotify Software is subject to third

party licenses found here*:

developer.spotify.com/esdk-third-party-

licenses

(https://developer.spotify.com/esdk-third-

party-licenses/)

* This function may not be available in

some countries/regions.

•Opera

Devices SDK from Opera Software

• All other trademarks are trademarks of their

respective owners.

• Other system and product names are

generally trademarks or registered

trademarks of the manufacturers. ™ and ®

marks are not indicated in this document.

Software License Information

For EULA (End User License Agreement),

please refer to [License agreement] in the

option menu on each network service icon.

For details of the other software licenses,

please select [Setup] and refer to [Software

License Information] in [System Settings].

This product contains software that is subject

to the GNU General Public License (“GPL”)

or GNU Lesser General Public License

(“LGPL”). These licenses establish that

customers have the right to acquire, modify,

and redistribute the source code of said

software in accordance with the terms of the

GPL or the LGPL.

The source code for the software used in this

product is subject to the GPL and LGPL, and

is available on the Web. To download, please

visit the following website:

http://oss.sony.net/Products/Linux

Please note that Sony cannot respond to any

inquiries regarding the content of this source

code.

REAL END USER LICENSE

AGREEMENT

1. End users are prohibited from modifying,

translating, reverse engineering,

decompiling, disassembling or using other

means to discover the software developed

by Real or otherwise replicate the

functionality of the software, except to the

extent that this restriction is expressly

prohibited by applicable law.

2. Real disclaims all warranties and

conditions, express and implied, including

implied warranties or conditions of

merchantability and fitness for a particular

purpose; and effectively exclude all

liability for indirect, special, incidental and

consequential damages, including but not

limited to lost profits or replacement

systems.

Disclaimer regarding services offered

by third parties

Services offered by third parties may be

changed, suspended, or terminated without

prior notice. Sony does not bear any

responsibility in these sorts of situations.

Contents

2 WARNING

2 Precautions

Getting Started

8 Guide to Parts and Controls

13 Step 1: Connecting the Player

14 Step 2: Preparing for Network Connection

14 Step 3: Easy Setup

Playback

16 Playing a Disc

18 Playing from a USB Device

18 Playing via a Network

19 Listening to Audio from a Bluetooth Device

20 Available Options

Settings and Adjustments

23 Using the Settings Displays

23 [Software Update]

23 [Screen Settings]

25 [Audio Settings]

26 [Bluetooth Settings]

27 [BD/DVD Viewing Settings]

28 [Parental Control Settings]

28 [Music Settings]

28 [System Settings]

29 [Network Settings]

30 [Easy Network Settings]

30 [Resetting]

Additional Information

31 Troubleshooting

36 Specifications

Getting Started

Guide to Parts and Controls

A Door tray

B Z (open/close)

C 1 (on/standby)

Turns on the player, or sets to

standby mode.

D Power indicator

Lights up when the player is

turned on.

E (USB) jack

Connect a USB device to this jack.

F Remote sensor

To lock the disc tray (Child Lock)

You can lock the disc tray to avoid

accidental opening of the tray.

While the player is turned on, press

x (stop), HOME, and then TOP MENU

button on the remote to lock or unlock

the tray.

Front panel

Getting Started

A Ventilation holes

B DIGITAL OUT (COAXIAL) jack

C HDMI OUT jack

D LAN (100) terminal

E DC IN 12 V (AC adaptor input) jack

Rear panel

The available functions of the remote are

different depending on the disc or the

situation.

N, TV2 +, and AUDIO buttons have a

tactile dot. Use the tactile dot as a reference

when operating the player.

A Z (open/close)

Opens or closes the disc tray.

-TV- t (TV input select)

Switches between TV and other

input sources.

-TV- 1 (TV on/standby)

Turns on the TV, or sets to standby

mode.

1 (on/standby)

Turns on the player, or sets to

standby mode.

B Colour buttons (red/green/

yellow/blue)

Shortcut keys for interactive

functions.

C TOP MENU

Opens or closes the BD’s or DVD’s

Top Menu.

POP UP/MENU

Opens or closes the BD-ROM’s

Pop-up Menu, or the DVD’s menu.

OPTIONS (page 20)

Displays the available options on the

screen.

RETURN

Returns to the previous display.

</M/m/,

Moves the highlight to select a

displayed item.

• M/m

as a shortcut key to launch track

search window and input track number

during music CD playback.

• M/m

as a shortcut key to rotate photo

clockwise/counterclockwise by 90

degrees.

• </,

as a shortcut key to perform

search functions during DLNA video

playback.

Centre button (ENTER)

Enters the selected item.

Remote

Getting Started

HOME

Enters the player’s home screen.

BLUETOOTH (page 19)

• Scan device list will appear if this

player has no paired Bluetooth

device.

• Connect to the last connected

device if this player has a paired

Bluetooth device. If the connection

fails, scan device list will appear.

• Disconnect the connected

Bluetooth device.

NETFLIX

Access the “NETFLIX” online

service. For further NETFLIX

online service details, visit the

following website and check the

FAQ: http://www.sony-asia.com/

support/

D m/M (fast reverse/fast

forward)

• Fast reverse/fast forward the disc

when you press the button during

playback. The search speed

changes each time you press the

button during video playback.

• Plays in slow motion, when

pressed for more than one second

in pause mode.

• Plays one frame at a time, when

you press for a short time in pause

mode.

N (play)

Starts or re-starts playback.

./> (previous/next)

Skips to the previous/next chapter,

track, or file.

X (pause)

Pauses or re-starts playback.

x (stop)

Stops playback and remembers the

stop point (resume point).

The resume point for a title/track is

the last point you played or the last

photo for a photo folder.

SUBTITLE (page 27)

Selects the subtitle language when

multi-lingual subtitles are recorded

on BD-ROMs/DVD VIDEOs.

TV2 (volume) +/–

Adjusts the TV volume.

AUDIO (page 27)

Selects the language track when

multi-lingual tracks are recorded on

BD-ROMs/DVD VIDEOs.

Selects the sound track on CDs.

(muting)

Turns off the sound temporarily.

DISPLAY (page 17)

Displays the playback information

on the screen.

Hold down -TV- 1 and the TV

manufacturer’s code using the remote

buttons for 2 seconds.

If more than one remote button is listed,

try entering them one at a time until you

find the one that works with your TV.

Code numbers of controllable

TVs

Manufacturer Remote Button

Sony (Default) Colour button

(red)

Philips Colour button

(green) / Colour

button (yellow) /

RETURN

Panasonic Colour button

(blue) / Centre

button (ENTER)

Hitachi TOP MENU

Sharp M

Toshiba POP UP/MENU

Loewe <

Samsung ,

LG/Goldstar m

Getting Started

Step 1: Connecting the Player

Do not connect the AC power cord (mains lead) until you have made all the connections.

Connect the player to your TV with a High Speed HDMI Cable.

Select one of the following connection methods according to the input jacks on your

AV amplifier (receiver).

Connecting to your TV

Connecting to your AV amplifier (receiver)

High Speed HDMI Cable (supplied)

High Speed HDMI Cable

(supplied)

High Speed HDMI Cable

(not supplied)

t Set [BD Audio MIX Setting]

in [Audio Settings] (page 26).

High Speed HDMI Cable

(supplied)

Coaxial digital cable

(not supplied)

Step 2: Preparing for

Network Connection

If you are not going to connect the player

to a network, proceed to “Step 3: Easy

Setup” (page 14).

Use a LAN cable to connect to the LAN

(100) terminal on the player.

The use of a shielded and straight interface

cable (LAN cable) is recommended.

Use the wireless LAN that is built into

the player.

Step 3: Easy Setup

1 Insert two R03 (size AAA)

batteries by matching the 3 and

# ends on the batteries to the

markings inside the battery

compartment of the remote.

2 Connect the supplied AC adaptor

and AC power cord (mains lead)

in the numeric order shown

below. When removing them, do

so in reverse order.

Wired Setup

Wireless Setup

ADSL modem/

Cable modem

Broadband

router

LAN cable

(not supplied)

Internet

Wireless LAN

router

ADSL modem/

Cable modem

Internet

LAN cable (not supplied)

When turned on for the first time

Wait for a short while before the

player turns on and starts [Easy

Initial Settings].

to mains

AC adaptor (supplied)

AC power cord (mains lead)

(supplied)

1 to DC IN 12 V

Getting Started

3 Press 1 to turn on the player.

4 Turn on the TV and set the input

selector on your TV by pressing

t button on the remote. This

will show the signal from the

player on your TV screen.

5 Perform [Easy Initial Settings].

Follow the on-screen instructions to

make the basic settings using

</M/m/, and ENTER on the

remote.

When [Easy Initial Settings] is complete,

select [Easy Network Settings] to use the

network functions of the player.

The home screen appears when you

press HOME. Select an application

using </M/m/,, and press ENTER.

[My Apps]: Manages favourite

application. You may add shortcuts for

application from [All Apps].

[Featured Apps]: Displays

recommended application.

[All Apps]: Shows all available

applications. You can add applications

to [My Apps] by pressing OPTIONS,

and select [Add to My Apps].

[Setup]: Adjusts the player’s settings.

Various settings and playback

operations are available by pressing

OPTIONS. The available items differ

depending on the situation.

[Move Application]: Arranges

applications in [My Apps].

[Remove Application]: Deletes

applications in [My Apps].

[Data Contents]: Displays the

contents of the mixed disc.

ENTER

</M/m/,

Home screen display

Available options

Application

Tools

Playback

Playing a Disc

For “Playable discs”, see page 37.

1 Switch the input selector on your

TV so that the signal from the

player appears on your TV screen.

2 Press Z, and place a disc on the

disc tray.

3 Press Z to close the disc tray.

Playback starts.

If playback does not start

automatically, select [Video],

[Music], or [Photo] category in

(Disc), and press ENTER.

(Mixed disc) contains data contents. Press

OPTIONS on the remote and select [Data

Contents] to display any available contents.

Some BD-ROMs with the “BD-LIVE”

logo have bonus contents and other data

that can be downloaded for your

enjoyment.

1 Connect a USB memory to the

USB jack on the player (page 8).

Use a 1 GB or larger USB memory

as your local storage.

2 Prepare for BD-LIVE (BD-LIVE

only).

• Connect the player to a network

(page 14).

• Set [BD Internet Connection] in

[BD/DVD Viewing Settings] to

[Allow] (page 27).

3 Insert a BD-ROM with

BONUSVIEW/BD-LIVE.

The operation method differs

depending on the disc. Refer to the

instruction manual supplied with the

disc.

To delete data in the USB memory, select

[Delete BD Data] in [BD/DVD Viewing

Settings], and press ENTER. All data stored in

the buda folder will be erased.

Playing side facing down

Enjoying BONUSVIEW/

BD-LIVE

Playback

You can enjoy a Blu-ray 3D Disc with

the “Blu-ray 3D” logo.

1 Prepare for Blu-ray 3D Disc

playback.

• Connect the player to your

3D-compatible devices using a

High Speed HDMI Cable.

• Set [3D Output Setting] and [TV

Screen Size Setting for 3D] in

[Screen Settings] (page 23).

2 Insert a Blu-ray 3D Disc.

The operation method differs

depending on the disc. Refer to the

instruction manual supplied with the

disc.

Refer also to the instruction manuals supplied

with your TV and the connected device.

You can view the playback information,

etc., by pressing DISPLAY.

The displayed information differs

depending on the disc type and player

status.

Example: when playing a BD-ROM

A Output resolution/Video frequency

B Title number or name

C The currently selected angle

D The currently selected audio setting

E Available functions ( angle,

audio, subtitle)

F Playback information

Displays the Play mode, Playing

status bar, Disc type, Video codec,

Bitrate, Repeat type, Elapsed time,

and Total playing time.

G Chapter number

Enjoying Blu-ray 3D Displaying the play

information

Playing from a USB

Device

For “Playable types of files”, see

page 38.

1 Connect the USB device to the

USB jack on the player (page 8).

Refer to the instruction manual

supplied with the USB device before

connecting.

2 Select [USB device] using

</M/m/,, and press ENTER.

3 Select [Video], [Music], or

[Photo] category using M/m, and

press ENTER.

Playing via a Network

A DLNA-compatible product can play

video/music/photo files stored on

another DLNA-compatible product via a

network.

1 Prepare to use DLNA.

• Connect the player to a network

(page 14).

• Prepare the other necessary

DLNA-compatible products.

Refer to the instruction manual

supplied with the product.

To play a file from a DLNA server via

this unit (DLNA player)

Select [Video], [Music], or [Photo]

category from [Media Server] in [All

Apps], then choose the file you want to

play.

To play a file from a DLNA server via

another product (Renderer)

When you play files from a DLNA

Server on this unit, you can use a DLNA

Controller-compatible product (a phone,

etc.), to control playback.

Control this unit using a DLNA

controller. Refer to the instruction

manual supplied with the DLNA

controller.

Playing files on a Home

Network (DLNA)

Server

Player

Server

Controller

Renderer

Playback

Listen out loud with Spotify Connect

1 Connect your player to your wifi

network.

2 Open up the Spotify app on your

phone, tablet or laptop using the same

wifi network.

3 Play a song and select Devices

Available.

4 Select your player and start listening.

Spotify app may not be available in some

countries/regions.

“Screen mirroring” is a function to

display the screen of a mobile device on

the TV by Miracast technology.

The player can be connected directly

with a Screen mirroring compatible

device (e.g. smartphone, tablet). You can

enjoy the display screen of the device on

your large TV screen. No wireless router

(or access point) is required to use this

feature.

• When using Screen mirroring, the quality of

picture and sound may sometimes be

deteriorated due to interference from other

network. You may improve by adjusting

[Screen mirroring RF Setting] (page 29).

• Some network functions may not be

available during Screen mirroring.

• Make sure that the device is compatible with

Miracast. Connectivity with all Miracast

compatible devices is not guaranteed.

1 Select [Screen mirroring]

from home screen using

</M/m/,, and press ENTER.

2 Follow the on-screen

instructions.

Listening to Audio from

a Bluetooth Device

To listen to an audio source from a

Bluetooth device (e.g. headphone) via

this player, you need to pair the

Bluetooth device with this player.

Pairing is an operation where the

Bluetooth devices are registered to each

other before connection. Set [Bluetooth

Mode] in [Bluetooth Settings] to [On]

(page 26) before pairing a Bluetooth

device with this player.

1 Place the Bluetooth device within

1 meter from the player.

2 Perform any of the following

steps:

– When connecting to a device for

the first time, press BLUETOOTH

button on the remote.

– Select [Bluetooth Device] option

on the playback screen.

– Select [Device List] in [Bluetooth

Settings].

Using Spotify Connect

Using Screen mirroring

Pairing with a Bluetooth

device

3 Set the Bluetooth device in

pairing mode.

For details on setting the Bluetooth

device in pairing mode, refer to the

instruction manual supplied with the

device.

4 Press M/m repeatedly to select

the device you want, and press

ENTER.

When the Bluetooth connection is

established, the device name will

appear on the TV screen.

5 Start playback content.

6 Adjust the volume.

Adjust the volume of the Bluetooth

device first. If the volume level is

still low, adjust the volume level by

pressing OPTIONS on the remote

during playback screen and select

[Bluetooth Volume]. Then, press

M/m to adjust the volume.

Some Bluetooth device does not support

volume control.

To disconnect the Bluetooth device

Perform any of the following steps:

– Press BLUETOOTH button on the

remote (page 11).

– Disable the Bluetooth function on the

Bluetooth device.

– Turn off the player or the Bluetooth

device.

Before you turn off your Bluetooth device,

turn down the volume level of your TV to

avoid sudden high volume outbursts.

Available Options

Various settings and playback

operations are available by pressing

OPTIONS. The available items differ

depending on the situation.

Common options

x [Repeat Setting]: Sets the repeat

mode.

x [3D Menu]:

– [Simulated 3D]: Adjusts the

simulated 3D effect.

– [3D Depth Adjustment]: Adjusts the

depth of 3D image.

– [2D Playback]: Sets playback to 2D

image.

x [Play]/[Stop]: Starts or stops the

playback.

x [Play from start]: Plays the item

from the beginning.

x [Bluetooth Device]: Displays

Bluetooth device list.

x [Bluetooth Volume]: Displays the

Bluetooth volume control view. This

option item is only available when the

Bluetooth device is connected.

Video only

x [3D Output Setting]: Sets whether or

not to output 3D video automatically.

x [A/V SYNC]: Adjusts the gap between

picture and sound, by delaying the

sound output in relation to the picture

output (0 to 120 milliseconds).

x [Video Settings]:

– [Picture Quality Mode]: Selects the

picture settings for different lighting

environments.

Page is loading ...

Sony BDP-S6700 Operating instructions

Brand: Sony

Model: BDP-S6700

Category: Blu-Ray players

Type: Operating instructions

Download PDF

report

Sony BDP-S6700 Operating instructions

Sony BDP-S6700 Operating instructions

Related papers

Other documents