Roland CB-VG9 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Roland CB-VG9 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
fig.1j
fig.2j
fig.4j
fig.5j
fig.6j
CB-VG9 MADE IN CHINA 40782078 1PD
©
CB-VG9_je 1 ページ 2007年7月6日 金曜日 午前10時46分
USING THE UNIT SAFELY
Never drop this product or subject it
to strong impact while it contains
any device.
Important Notes
Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave
it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
For everyday cleaning wipe the unit with a
soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure
to wipe the unit thoroughly with a soft, dry
cloth.
Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility
of discoloration and/or deformation.
Do not launder or wash the entire bag.
Main Specifications
Dimensions:
585 (W) x 210 (D) x 280 (H) mm
23-1/16 (W) x 8-5/16 (D) x 11-1/16 (H)
inches
(not including the handle)
Weight:
1240 g /2 lbs 12 oz
Main Materials:
Front cloth: Nylon,
Inside core: polyurethane
* In the interest of product improvement,
the specifications and/or appearance of
this unit are subject to change without
prior notice.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
This product is a case for storing the set of VG-99 and FC-300 or VG-99 and PDS-10.
fig.1j
Pressing in the two tabs on either side of the
fastener at the same time unlocks the fastener,
allowing the strap to be pulled out (or
reinserted)
fig.2j
Store the FC-300 inside the long storage
compartment at the back of the case.
Caution when storing your
effects processor
When storing your effects processor in this
case, make sure that the controllers are
facing the case (the side with the stopper).
When storing the VG-99 or FC-300 make
sure that the connection jacks face upwards.
fig.3j
Secure the PDS-10 in place using the included
retainer band. Pull out the top of the stand, line
it up with the bottom part, and secure it at the
indentation on the legs of the bottom part.
fig.3j
First, store the PDS-10 stand inside the long
storage compartment at the back of the case.
fig.3j
Store the VG-99 in the storage compartment at
the left side of the front. You can store it with
the PDS-10 mounting plate left attached.
At the right side of the front, store the AC
adaptor and other items.
CB-VG9 MADE IN CHINA 40782078 1PD
Copyright
©
2007 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
CB-VG9_je 2 ページ 2007年7月6日 金曜日 午前10時46分
/