KTM 65 SX 2011 Owner's manual

OWNER'S MANUAL 2011

65 SX

Art. no. 3211594en

DEAR KTM CUSTOMER 1

DEAR KTM CUSTOMER

Congratulations on your decision to purchase a KTM motorcycle. You are now the owner of a state-of-the-art sports motorcycle that will

give you and your child enormous pleasure if you service and maintain it accordingly.

We wish you great pleasure riding the vehicle!

Enter the serial numbers of your vehicle below.

Chassis number ( p. 9) Dealer's stamp

Engine number ( p. 9)

The owner's manual corresponded to the latest state of this series at the time of printing. Slight deviations resulting from continuing

development and design can, however, not be completely excluded.

All specifications are non-binding. KTM Sportmotorcycle AG specifically reserves the right to modify or delete technical specifica-

tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt

these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery

options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain spe-

cial equipment that does not belong to the regular scope of delivery.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright

owner.

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead

to the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM-Sportmotorcycle AG

5230 Mattighofen, Austria

TABLE OF CONTENTS 2

TABLE OF CONTENTS

MEANS OF REPRESENTATION ............................................ 4

IMPORTANT INFORMATION ................................................ 5

VIEW OF VEHICLE............................................................... 7

View of the vehicle from the left front (example)................. 7

View of the vehicle from the right rear (example) ................ 8

SERIAL NUMBERS.............................................................. 9

Chassis number............................................................... 9

Engine number................................................................ 9

Shock absorber part number............................................. 9

CONTROLS....................................................................... 10

Clutch lever .................................................................. 10

Hand brake lever ........................................................... 10

Throttle grip.................................................................. 10

Short circuit button ....................................................... 10

Opening filler cap.......................................................... 10

Closing filler cap ........................................................... 11

Fuel tap........................................................................ 11

Choke........................................................................... 11

Kickstarter.................................................................... 11

Shift lever..................................................................... 11

Foot brake lever............................................................. 12

Plug-in stand ................................................................ 12

PUTTING INTO OPERATION............................................... 13

Advice on first use......................................................... 13

Running in the engine.................................................... 14

RIDING INSTRUCTIONS .................................................... 15

Checks and maintenance measures when preparing for

use .............................................................................. 15

Starting ........................................................................ 15

Starting up ................................................................... 16

Shifting, riding.............................................................. 16

Braking ........................................................................ 16

Stopping, parking .......................................................... 17

Refueling...................................................................... 17

SERVICE SCHEDULE......................................................... 19

Service schedule ........................................................... 19

TUNING THE CHASSIS...................................................... 21

Adjusting the compression damping of the fork ................ 21

Adjusting the rebound damping of the fork....................... 21

Adjusting the compression damping of the shock

absorber ....................................................................... 21

Adjusting the rebound damping of the shock absorber....... 22

Measuring rear wheel sag unloaded ................................. 22

Checking the static sag of the shock absorber .................. 22

Checking the riding sag of the shock absorber .................. 23

Adjusting the spring preload of the shock absorber x ...... 23

Adjusting the riding sag x............................................. 24

Handlebar position ........................................................ 24

Adjusting handlebar position x...................................... 24

Vehicle level ................................................................. 25

Adjusting the fork overhang x ....................................... 25

MAINTENANCE WORK ON THE CHASSIS ........................... 27

Raising the motorcycle with a lift stand ........................... 27

Removing the motorcycle from the lift stand .................... 27

Bleeding fork legs.......................................................... 27

Cleaning the dust boots of the fork legs ........................... 27

Removing the fork legs x.............................................. 28

Installing the fork legs x............................................... 28

Removing the fork protector x....................................... 29

Installing the fork protector x ....................................... 30

Removing the lower triple clamp x ................................ 30

Installing the lower triple clamp x................................. 31

Checking play of steering head bearing............................ 33

Adjusting play of steering head bearing x....................... 33

Greasing the steering head bearing x............................. 33

Removing the shock absorber x..................................... 34

Installing shock absorber x........................................... 34

Dismounting the start number plate ................................ 34

Installing the start number plate ..................................... 34

Dismounting the front fender.......................................... 35

Installing the front fender............................................... 35

Removing the seat......................................................... 35

Mounting the seat ......................................................... 35

Removing the air filter x............................................... 36

Installing the air filter x ............................................... 36

Cleaning air filter x...................................................... 37

Removing main silencer ................................................. 37

Installing the main silencer ............................................ 37

Changing the glass fiber yarn filling of the main

silencer x ................................................................... 38

Dismounting the fuel tank x ......................................... 38

Installing the fuel tank x.............................................. 39

Removing the chain guard.............................................. 40

Installing the chain guard............................................... 40

Checking chain dirt ....................................................... 41

Cleaning the chain......................................................... 41

Checking the chain tension ............................................ 41

Adjusting the chain tension ............................................ 42

Checking the chain, rear sprocket, engine sprocket and

chain guide................................................................... 43

Checking the chain tension - installing rear wheel............. 44

Adjusting chain tension - after checking .......................... 45

Adjusting chain tension - installing rear wheel.................. 45

Adjusting the chain guide x.......................................... 45

Checking the throttle cable routing.................................. 46

Adjusting basic position of clutch lever............................ 46

Checking the fluid level of hydraulic clutch...................... 46

Changing the hydraulic clutch fluid x............................ 46

BRAKES........................................................................... 48

Checking free travel of hand brake lever........................... 48

Adjusting the basic position of the hand brake lever.......... 48

Checking brake discs ..................................................... 48

Checking the front brake fluid level ................................. 49

Adding front brake fluid x ............................................ 49

Checking the front brake linings...................................... 50

Removing front brake linings x ..................................... 50

Installing the front brake linings x................................. 51

Changing the front brake linings x................................. 52

Checking the free travel of the foot brake lever ................. 52

Adjusting the free travel of the foot brake lever x............ 53

Adjusting the basic position of the foot brake lever x ...... 53

Checking rear brake fluid level........................................ 54

Adding rear brake fluid x.............................................. 54

Checking the rear brake linings ....................................... 55

Removing rear brake linings x....................................... 55

Installing the rear brake linings x.................................. 56

Changing the rear brake linings x.................................. 56

WHEELS, TIRES ............................................................... 58

Removing the front wheel x.......................................... 58

Installing the front wheel x........................................... 58

Removing the rear wheel x ........................................... 59

Installing the rear wheel x............................................ 59

TABLE OF CONTENTS 3

Checking the tire condition............................................. 60

Checking tire air pressure............................................... 60

Checking spoke tension.................................................. 60

COOLING SYSTEM ............................................................ 62

Cooling system .............................................................. 62

Checking the antifreeze and coolant level ........................ 62

Checking the coolant level.............................................. 63

Draining the coolant x.................................................. 63

Refilling coolant x ....................................................... 64

TUNING THE ENGINE ....................................................... 65

Checking the play in the throttle cable............................. 65

Adjusting the play in the throttle cable x ....................... 65

Carburetor - idle ............................................................ 65

Carburetor - adjusting the idle speed x .......................... 65

Emptying the carburetor float chamber x ....................... 66

MAINTENANCE WORK ON THE ENGINE............................. 67

Checking the gear oil level.............................................. 67

Changing the gear oil x ................................................ 67

Draining the gear oil x ................................................. 67

Filling up with gear oil x .............................................. 68

Adding gear oil x......................................................... 68

CLEANING, CARE ............................................................. 70

Cleaning motorcycle ...................................................... 70

STORAGE ......................................................................... 71

Storage......................................................................... 71

Putting into operation after storage ................................. 71

TROUBLESHOOTING......................................................... 72

TECHNICAL DATA - ENGINE.............................................. 74

TECHNICAL DATA - ENGINE TIGHTENING TORQUES.......... 75

TECHNICAL DATA - CARBURETOR..................................... 76

Basic setting................................................................. 76

Carburetor configuration................................................. 76

TECHNICAL DATA - CHASSIS ............................................ 78

TECHNICAL DATA - FORK.................................................. 79

TECHNICAL DATA - SHOCK ABSORBER ............................. 80

TECHNICAL DATA - TIGHTENING TORQUES FOR

CHASSIS .......................................................................... 81

SUBSTANCES................................................................... 82

AUXILIARY SUBSTANCES.................................................. 84

STANDARDS..................................................................... 86

INDEX .............................................................................. 87

MEANS OF REPRESENTATION 4

Symbols used

The symbols used are explained in the following.

Indicates an expected reaction (e.g., to a work step or a function).

Indicates an unexpected reaction (e.g., to a work step or a function).

All work marked with this symbol requires specialist knowledge and technical understanding. In the interest of

the safety of your child, have these jobs done in an authorized KTM workshop! There, your motorcycle will be

serviced optimally by specially trained experts using the specialist tools required.

Identifies a page reference (more information is provided on the specified page).

Formats used

The typographical and other formats used are explained in the following.

Proper name Identifies a proper name.

Name

®

Identifies a protected name.

Brand™ Identifies a brand in merchandise traffic.

IMPORTANT INFORMATION 5

Use definition

KTM sport motorcycles are designed and built to withstand the normal stresses and strains of competitive use. The motorcycles com-

ply with currently valid regulations and categories of the top international motorsport organizations.

Info

The motorcycle must be used only in closed off areas remote from public road traffic.

Service

A prerequisite for perfect operation and prevention of wear is that the engine and chassis service, care and adjustment work described

in the owner's manual are properly carried out. Poor adjustment and tuning of the engine and chassis can lead to damage and break-

age of components.

Using the motorcycle in difficult conditions such as on sand or very muddy or wet terrain can lead to above-average wear of compo-

nents such as the transmission train or the brakes. For this reason, it may be necessary to service or replace worn parts before the

limit specified in the service schedule is reached.

Pay careful attention to the prescribed running-in period, inspection and service intervals. If you observe these exactly, you will ensure

a much longer service life for your motorcycle.

Warranty

The work prescribed in the service schedule must be carried out in an authorized KTM workshop only and confirmed in the customer's

service record and in the KTM dealer.net since otherwise no warranty claims will be honored. No warranty claims can be honored for

damage resulting from manipulations and/or alterations to the vehicle.

Fuel, oils, etc.

You should use the fuels, oils and greases according to specifications as listed in the owner's manual.

Spare parts, accessories

For your own safety, only use spare parts and accessory products that have been approved and/or recommended by KTM and have

them installed by an authorized KTM workshop. KTM accepts no liability for other products and any resulting damage or loss.

Certain spare parts and accessories are specified in parentheses in the descriptions. Your KTM dealer will be glad to advise you.

The current KTM PowerParts for your vehicle can be found on the KTM website.

International KTM Website: http://www.ktm.com

Work rules

Special tools are needed for certain tasks. They are not included with the vehicle but can be ordered under the number in parenthe-

ses. Ex.: bearing puller (15112017000)

During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals, seal rings, O-rings, pins, lock washers) must be replaced

by new parts.

If a thread locker is used for the screw connections (e.g. Loctite

®

), follow the specific manufacturer instructions regarding its use.

Parts that are to be reused after disassembly must be cleaned and checked for damage and wear. Change damaged or worn parts.

After repair and maintenance, ensure that the vehicle is roadworthy.

Transport

Note

Danger of damage The parked vehicle may roll away or fall over.

– Always place the vehicle on a firm and even surface.

Note

Fire hazard Some vehicle components become very hot when the vehicle is operated.

– Do not park the vehicle near flammable or explosive substances. Do not place objects on the vehicle while it is still warm from

being run. Always let the vehicle cool first.

– Switch off the engine.

– Use straps or other suitable devices to secure the motorcycle against accidents or falling over.

IMPORTANT INFORMATION 6

Environment

Motorcycling is a wonderful sport and we naturally hope that you and your child will be able to enjoy it to the fullest. However, it is a

potential problem for the environment and can lead to conflicts with other persons. But if you use your motorcycle responsibly, you

can ensure that such problems and conflicts do not have to occur. To protect the future of motorcycle sport, make sure that your child

uses the motorcycle legally, display environmental consciousness, and respect the rights of others.

Notes/warnings

Pay close attention to the notes/warnings.

Info

Various information and warning labels are affixed to the vehicle. Do not remove information/warning labels. If they are miss-

ing, you or others may not recognize potential hazards and may therefore be injured.

Grades of risks

Danger

Identifies a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures

are not taken.

Warning

Identifies a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Identifies a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Identifies a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Identifies a danger that will lead to environmental damage if the appropriate measures are not taken.

Owner's manual

– Carefully read this owner's manual in its entirety together with your child before letting your child ride the motorcycle for the first

time. It contains a lot of information and tips to help you and your child operate and handle the motorcycle. Only then will you

find out how to customize the motorcycle ideally for your child's use and how to protect your child from injury. The owner's manual

also contains important information on servicing the motorcycle.

– The owner's manual is an important component of the motorcycle and should be handed over to the new owner if the vehicle is

sold.

VIEW OF VEHICLE 7

3.1View of the vehicle from the left front (example)

B00257-10

1 Hand brake lever

2 Clutch lever

3 Quick release for seat lock

4 Front brake caliper

5 Fuel tap

6 Choke lever

7 Shift lever

8 Footrest

9 Shock absorber rebound adjustment

VIEW OF VEHICLE 8

3.2View of the vehicle from the right rear (example)

B00256-10

1 Filler cap

2 Kill switch

3 Throttle grip

4 Chassis number

5 Rear brake caliper

6 Level viewer for brake fluid, rear

7 Shock absorber compression adjustment

8 Foot brake lever

9 Kickstarter

SERIAL NUMBERS 9

4.1Chassis number

700390-01

The chassis number  is stamped on right of the steering head.

4.2Engine number

700391-01

The engine number  is stamped on the left side of the engine under the engine

sprocket.

4.3Shock absorber part number

700392-01

The shock absorber part number  is stamped on the top of the shock absorber above

the adjusting ring on the engine side.

CONTROLS 10

5.1Clutch lever

700393-10

The clutch lever  is fitted on the left side of the handlebar.

The clutch is hydraulically operated and self-adjusting.

5.2Hand brake lever

700394-01

Hand brake lever  is fitted on the right side of the handlebar.

The hand brake lever is used to activate the front brake.

5.3Throttle grip

700408-01

Throttle grip  is fitted on the right side of the handlebar.

5.4Short circuit button

700395-01

Short circuit button  is fitted on the left side of the handlebar.

Possible states

• Short circuit button in basic position – In this position, the ignition circuit is

closed, and the engine can be started.

• Short circuit button pressed – In this position, the ignition circuit is interrupted,

a running engine stops, and a non-running engine will not start.

5.5Opening filler cap

700396-01

– Press release button , turn filler cap counterclockwise and lift it free.

CONTROLS 11

5.6Closing filler cap

700397-01

– Replace the filler cap and turn clockwise until the release button  locks in place.

Info

Run the fuel tank breather hose  without kinks.

5.7Fuel tap

700407-01

Fuel tap  is on the left of the fuel tank.

Possible states

• Fuel tap is closed – The knurled screw is turned all the way clockwise. Fuel cannot

flow out of the fuel tank.

• Fuel tap is open – The knurled screw is turned all the way counterclockwise. Fuel

can flow out of the fuel tank.

5.8Choke

700402-01

Choke lever  is fitted on the left side of the carburetor.

Activating the choke function frees an opening through which the engine can draw

extra fuel. This gives a richer fuel-air mixture, which is needed for a cold start.

Info

If the engine is warm, the choke function must be deactivated.

Possible states

• Choke function activated – The choke lever is pushed down all the way.

• Choke function deactivated – The choke lever is pushed up all the way.

5.9Kickstarter

700403-01

The kickstarter  is fitted on the right of the engine.

The kickstarter can be swiveled.

Info

Before riding, swing the kickstarter inwards towards the engine.

5.10Shift lever

700398-01

Shift lever  is mounted on the left side of the engine.

CONTROLS 12

700399-01

The gear positions can be seen in the photograph.

The neutral or idle position  is between the first and second gears.

5.11Foot brake lever

700400-01

Foot brake lever  is located in front of the right footrest.

The foot brake lever is used to activate the rear brake.

5.12Plug-in stand

700406-01

The fixture for the plug-in stand  is located on the frame on the left side of the vehi-

cle.

The plug-in stand is used to park the motorcycle.

Info

Remove the plug-in stand before riding.

PUTTING INTO OPERATION 13

6.1Advice on first use

Warning

Danger of accidents Physical and mental readiness of a child.

– Your child must be able to ride a bicycle and must be able to erect the vehicle independently after a fall. In addition, your

child must understand the regulations and instructions from you or from other guardians. Do not ask too much of your

child; participation in competitive activities should not be considered until your child's stamina, riding techniques and

motivation are at the necessary levels. Children often underestimate or fail to recognize dangerous situations; make it clear

to your child that it should not, under any circumstances, operate the vehicle without supervision and that your child may

only drive at speeds that are commensurate with the child's riding abilities and the road conditions.

– Only let your child ride on the vehicle if it is physically and mentally ready to operate the vehicle.

Warning

Risk of injury Missing or poor protective clothing present an increased safety risk.

– Wear protective clothing (helmet, boots, gloves, pants and jacket with protectors) every time you ride the motorcycle. You

and your child should always used protective clothing that is in good condition and meets the legal requirements. When

you ride a motorcycle, set an example for your child and wear suitable protective clothing.

Warning

Danger of crashing Poor vehicle handling due to different tire tread patterns on front and rear wheels.

– The front and rear wheels must be fitted with tires with similar tread patterns to prevent loss of control over the vehicle.

Warning

Danger of accidents Critical riding behavior due to inappropriate riding.

– Ensure that your child adjusts the riding speed to the road conditions and to his or her riding abilities.

Warning

Danger of accidents Accident risk caused by presence of a passenger.

– Your vehicle is not designed to carry passengers. Do not ride with a passenger.

Warning

Danger of accidents Brake system failure.

– If the foot brake lever is not released, the brake linings drag permanently. The rear brake can fail due to overheating.

Ensure that your child raises his or her foot from the foot brake lever when the child does not want to brake.

Warning

Danger of accidents Destruction of chassis components.

– Do not exceed the maximum allowable rider weight.

Warning

Risk of misappropriation Usage by unauthorized persons.

– Never leave the vehicle while the engine is running. Secure the vehicle against use by unauthorized persons.

Info

When using your motorcycle, remember that others may feel disturbed by excessive noise.

– Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.

You receive a delivery certificate and the service record at vehicle handover.

– Carefully read the entire owner's manual together with your child before going for the first ride.

Info

Pay special attention to the safety warnings and injury risks.

Explain to your child the techniques of riding and falling, e.g. how shifting weight can influence handling characteristics.

– Familiarize your child with the controls.

– Adjust the basic position of clutch lever. ( p. 46)

– Adjust the basic position of the hand brake lever. ( p. 48)

–

Adjust the basic position of the foot brake lever. x ( p. 53)

– Before using the vehicle for the first time, ensure that the basic settings of the chassis are suitable for the weight of your child.

PUTTING INTO OPERATION 14

– Accustom your child to the handling of the motorcycle on suitable terrain, preferably on a large open meadow.

Info

To give your child a feel for the brake, you should push your child at first. Do not start the engine until your child is able to

apply the necessary brake pressure.

Initially, let your child ride to another person who can help your child stop and turn.

– Erect obstacles for your child to navigate around to accustom your child to handling the vehicle.

– Your child should also try to ride as slowly as possible and in a standing position to get a better feeling for the vehicle.

– Do not let your child ride on terrain that exceeds your child's capabilities and experience.

– Your child should hold the handlebar firmly with both hands and keep his or her feet on the footrests when riding.

– Do not exceed the maximum allowable rider weight.

Guideline

Maximum rider weight < 50 kg (< 110 lb.)

– Check the spoke tension. ( p. 60)

Info

The spoke tension must be checked after riding the motorcycle for one half hour.

– Run the engine in. ( p. 14)

6.2Running in the engine

– During the running-in phase, do not exceed the specified engine performance.

Guideline

Maximum engine performance

During the first 3 service hours < 70 %

During the first 5 service hours < 100 %

– Avoid fully opening the throttle!

RIDING INSTRUCTIONS 15

7.1Checks and maintenance measures when preparing for use

Info

Before each use, check the condition of the vehicle and its operating safety.

The vehicle must be in perfect technical condition when it is being operated.

– Check the gear oil level. ( p. 67)

– Check the front brake fluid level. ( p. 49)

– Check the rear brake fluid level. ( p. 54)

– Check the front brake linings. ( p. 50)

– Check the rear brake linings. ( p. 55)

– Check the brake system function.

– Check the coolant level. ( p. 63)

– Check the chain dirt accumulation. ( p. 41)

– Check the chain, rear sprocket, engine sprocket and chain guide. ( p. 43)

– Check the chain tension. ( p. 41)

– Check the tire condition. ( p. 60)

– Check the tire air pressure. ( p. 60)

– Clean the dust boots of the fork legs. ( p. 27)

– Bleed fork legs. ( p. 27)

– Check the air filter.

– Check the settings of all controls and ensure that they can be operated smoothly.

– Check all screws, nuts and hose clamps regularly for tightness.

– Check the fuel supply.

7.2Starting

Danger

Danger of poisoning Exhaust gases are poisonous and inhaling them may result in unconsciousness and/or death.

– When running the engine, always make sure there is sufficient ventilation, and do not start or run the engine in an enclosed

space without an effective exhaust extraction system.

Note

Engine failure High engine speeds in cold engines have a negative effect on the service life of the engine.

– Always warm up the engine at low engine speeds.

Info

If the motorcycle is unwilling to start, the cause can be old fuel in the float chamber. The flammable elements of the fuel

evaporate after a long time of standing.

If the float chamber is filled with fresh fuel, the engine starts immediately.

Engine has been out of use for more than 1 week

–

Empty the carburetor float chamber. x ( p. 66)

– Turn the knurled screw on the fuel tap all the way counterclockwise.

Fuel can flow from the fuel tank to the carburetor.

– Remove the motorcycle from the stand.

– Shift gear to neutral.

The engine is cold

– Push the choke lever down all the way.

– Forcefully step on the kickstarter, pushing it all the way down.

Info

Do not open the throttle.

RIDING INSTRUCTIONS 16

7.3Starting up

Info

The plug-in stand must be removed prior to riding.

– Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle carefully.

7.4Shifting, riding

Warning

Danger of accidents If you change down at high engine speed, the rear wheel can lock up.

– Do not change into a low gear at high engine speed. The engine races and the rear wheel can lock up.

Info

If you hear unusual noises while riding, stop immediately, switch off the engine and contact an authorized KTM workshop.

First gear is used for starting off or for steep inclines.

– When conditions allow (incline, road situation, etc.), your child can shift into a higher gear. To do so, release the throttle while

simultaneously pulling the clutch lever, shift into the next gear, release the clutch and open the throttle.

– If the choke function was activated, deactivate it after the engine has warmed up.

– When you reach maximum speed after fully opening the throttle, turn back the throttle to about ¾ of its range. The speed hardly

drops, but the fuel consumption falls considerably.

– Your child should always open the throttle only as much as the engine can handle – abruptly opening the throttle increases fuel

consumption.

– To shift down, brake and close the throttle at the same time.

– Pull the clutch lever and shift into a lower gear, release the clutch lever slowly and open the throttle or shift again.

– Your child should switch off the engine if he or she expects to be standing for a long time.

Guideline

≥ 2 min

– Your child should avoid frequent and extended slipping of the clutch. This heats the engine oil, the engine and the cooling system.

– Insist that your child ride with a low rpm instead of with a high rpm and a slipping clutch.

7.5Braking

Warning

Danger of accidents If you brake too hard, the wheels can lock.

– Adapt your braking to the traffic situation and the road conditions.

Warning

Danger of accidents Reduced braking efficiency caused by spongy pressure point of front or rear brake.

– Check the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Danger of accidents Reduced braking efficiency due to wet or dirty brakes.

– Clean or dry dirty or wet brakes by riding and braking gently.

– On sandy, wet or slippery surfaces, use the rear brake.

– Braking should always be completed before you go into a bend. Your child should change down to a lower gear appropriate to the

road speed.

– Insist that your child take advantage of the braking action of the engine when riding on long downhills. To do so, shift back one or

two gears, but do not overrev the engine. Your child will need to apply the brakes far less often and the brakes are not overheated.

RIDING INSTRUCTIONS 17

7.6Stopping, parking

Warning

Risk of misappropriation Usage by unauthorized persons.

– Never leave the vehicle while the engine is running. Secure the vehicle against use by unauthorized persons.

Warning

Danger of burns Some vehicle components get very hot when the vehicle is in use.

– Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these compo-

nents to cool down before starting work on them.

Note

Danger of damage The parked vehicle may roll away or fall over.

– Always place the vehicle on a firm and even surface.

Note

Fire hazard Some vehicle components become very hot when the vehicle is operated.

– Do not park the vehicle near flammable or explosive substances. Do not place objects on the vehicle while it is still warm from

being run. Always let the vehicle cool first.

Note

Material damage Damage and destruction of components by excessive load.

– The side stand is designed for the weight of the motorcycle only. Do not sit on the motorcycle when it is supported by the side

stand only. The side stand and/or the frame could be damaged and the motorcycle could fall over.

– Brake the motorcycle.

– Shift gear to neutral.

– Press and hold the short circuit button while the engine is idling until the engine stops.

– Turn the knurled screw on the fuel tap all the way clockwise.

– Park the motorcycle on firm ground.

7.7Refueling

Danger

Fire hazard Fuel is highly flammable.

– Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no

fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

– Fuel in the fuel tank expands when warm and can escape if the tank is overfilled. See the notes on refueling.

Warning

Danger of poisoning Fuel is poisonous and a health hazard.

– Avoid contact of the fuel with skin, eyes and clothing. Do not inhale fuel vapors. If fuel gets into your eyes, rinse imme-

diately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If fuel is swallowed,

contact a doctor immediately. Change clothing that has come into contact with fuel.

Warning

Environmental hazard Improper handling of fuel is a danger to the environment.

– Do not allow fuel to get into the ground water, the ground, or the sewage system.

–

Switch off the engine.

– Open the filler cap. ( p. 10)

A

400382-10

– Fill the fuel tank with fuel up to measurement .

Guideline

Measurement of  35 mm (1.38 in)

Fuel tank capac-

ity, approx.

3.5 l (3.7 qt.) Super unleaded gasoline, mixed with

2-stroke engine oil (1:60) ( p. 83)

2-stroke engine oil ( p. 82)

RIDING INSTRUCTIONS 18

– Close the filler cap. ( p. 11)

Page is loading ...

KTM 65 SX 2011 Owner's manual

This manual is also suitable for

KTM 65 SX 2011 Owner's manual

Related papers

Other documents