Alpina SF-5010 Owner's manual

Brand: Alpina

Model: SF-5010

Category: Household fans

Type: Owner's manual

Dear Customer,

Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2

year warranty and will provide years of service if looked after properly. The ALPINA name

brings you Quality, Reliability and Dependability. We hope you will continue to make ALPINA

your first choice in home appliances.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed:

1. Read all instructions carefully.

2. Make sure the power supply corresponds to one on the rating label.

3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.

4. Do not allow children to operate or play with the appliance.

5. Unplug from outlet when not in use, or before putting on/taking off parts.

6. Do not use with damaged electrical cord or plug.

7. If damaged or malfunction occurs, refer to an authorized service center only.

8. Do not place on or near hot surfaces.

9. Never pull the appliance by the power cord.

10. Do not use the appliance for other than intended household use.

Parts Description

1. Wire mesh grille

2. Fixed or oscillating operation

3. Plastic blades

4. electronic control panel

5. Blade assembly (inside)

6. Wall mounting bracket (at the back)

Save these instructions carefully

1. Keep the cord out of contact with sharp objects and hot surfaces.

2. Avoid contacting with moving parts. Keep your hands, hair and clothing away from the

air vents during operation to reduce risk of injury or damage to the Fan.

3. Do not use the appliance with any extension socket or power cord unless approved by a

certified electrician.

4. CAUTION: THE FAN MUST BE UNPLUGGED FROM THE ELECTRICAL OUTLET DURING

ASSEMBLY.

Assembly Instruction

Your wall Fan has been boxed unassembled to minimize packaging waste. Each part is

designed to fit together and can be disassembled easily for cleaning and storage. Note:

ensure the wall fan is unplugged from the power outlet before commencing assembly.

1. Mount the install plate (13) on the wall with 3 fixing

screws (14) provided.

2. Hang the motor and base (17) with the

hang hook (15) onto the hanging bracket.

3. Remove the plastic shaft

protector from the motor

shaft (10).

4. Loosen the rear guard securing

ring (6) from the motor and

Housing assembly.

5. Place the rear guard (8)

firmly to the motor and

housing assembly and

fasten by turning the rear

guard securing ring (6)

clockwise tightly.

6. Push the Fan blade (5) along

the motor shaft. Fasten

securely using the fan blade

Securing knot (4) with the

spinner by Turning anti-clockwise.

7. Attach the front guard (2).

Operation

1. Take the cover at the back of the remote control and insert the two 1.5V batteries.

2. Add-up-type timer: measures time from 0.5 hour up to the longest time of 7.5 hours. If

you press the timer once, the fan will run for 0.5 hours, if you press the timer twice, that

means it will run for 1 hour. When the timer indicator lights turn on at 0.5h, 1h, 2h, and

4h, that means the fan will run for 0.5h + 1H +2H + 4H = 7.5 hours. You can enjoy the 3

different timer mode’s : sleep, rhythmical and normal wind types.

3. Mode: if you press 1 = normal mode, if you press twice = natural mode, if you press 3x

= for sleep mode.

Cleaning & Maintenance

1. Always make sure the appliance is unplugged before cleaning.

2. To disassemble the fan, refer to assembly instruction and apply the instruction in a

reverse order.

3. Plastic parts can be wiped with soapy damp cloth or sponge. Ensure that all traces of the

soap are removed with the damp cloth or sponge.

4. Take Care: ensure that water (or any other liquid) does not enter the motor housing or

switch mechanism.

5. Ensure all parts are completely dry and re-assembled correctly before re-connecting to

the main supply.

Warning:

This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a

safety feature. Do not attempt to defeat the safety purpose of this plug.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately

from the municipal waste stream via designated collection facilities

appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop where

you purchase the product.

Specification

Model No. : SF-5010

Voltage : 230–240V ~ 50Hz

Wattage : 50watts

GUARANTEE

This product is guaranteed for a period of 2 years from the date of purchase against defects

in materials and workmanship. Under this guarantee the manufacturer undertakes to repair

or replace any parts found to be defective, provided the product is brought back to the

purchase address. This guarantee is only valid if the appliance has been used in accordance

with the instructions, and that it has not been modified, repaired or interfered with by any

unauthorized person, or damaged through misuse.

This guarantee does not cover wear and tear, or breakables such as ceramic items, etc. If

the product fails to operate and needs to be returned, pack it carefully, enclosing your name

and address and the reason for return and bring it to the address of purchase. If within the

guarantee period, please also provide the guarantee card and proof of purchase.

Alpina SF-5010 Owner's manual

Brand: Alpina

Model: SF-5010

Category: Household fans

Type: Owner's manual

Download PDF

report

Alpina SF-5010 Owner's manual

Alpina SF-5010 Owner's manual

Related papers

Other documents