SVP AEROSPACE Bias Inserter Tee User manual

Bias Inserter Tee
Brand
SVP AEROSPACE
Model
Bias Inserter Tee
Type
User manual

SVP AEROSPACE Bias Inserter Tee allows you to power equipment, like LNAs or down-converters, connected to the other end of a coaxial cable. It features a frequency range of 10 to 6000 MHz, an insertion loss of typically 0.6 dB at 10 MHz to 4000 MHz and 0.8 dB at 6000 MHz, a maximum RF power handling of 1W, and an isolation of 30 dB. It has an EGG Lemo female connector for DC power input with a maximum rating of 30 V / 1A, an N female connector for RF output, and an N male connector for RF input.

SVP AEROSPACE Bias Inserter Tee allows you to power equipment, like LNAs or down-converters, connected to the other end of a coaxial cable. It features a frequency range of 10 to 6000 MHz, an insertion loss of typically 0.6 dB at 10 MHz to 4000 MHz and 0.8 dB at 6000 MHz, a maximum RF power handling of 1W, and an isolation of 30 dB. It has an EGG Lemo female connector for DC power input with a maximum rating of 30 V / 1A, an N female connector for RF output, and an N male connector for RF input.

BIAS INSERTER TEE
(BIAS-TEE)
MANUAL V2.3
Bias Inserter Tee (BIAS-TEE)
Page 2
Contents
1 Description ................................................................................. 3
2 Technical features ........................................................................ 4
2.1 BIAS-TEE .............................................................................. 4
2.2 EGG y FGG Lemo connectors .................................................... 5
List of figures
Figure 1.1 Bias Insertion Tee. BIAS-TEE................................................ 3
Figure 2.1: Connector pinout .............................................................. 5
List of tables
Table 1 Bias Tee features ................................................................... 4
Table 2: Power supply connection technical features ............................... 5
Table 3: Power supply connector pinout ................................................ 5
Bias Inserter Tee (BIAS-TEE)
Page 3
1 Description
The Bias Tee is very useful to give power supply to an equipment connected
to the other end of the coaxial cable, as an LNA or a down-converter.
For it, it has a N male connector, a N female connector and an EGG Lemo
female connector. The N male connector should be connected to the receiver
input and the N female connector to the LNA’s RF output through the coaxial
cable. The DC power inserted through the Lemo connector, supporting a
maximum of 30 V / 1A.
This equipment is protected from short-circuits by means of an
autoreseteable fuse.
The cable with FGG Lemo male connector that is used to insert the DC power
is not supplied with the bias insertion tee (BIAS-TEE).
In the following figure the bias insertion tee (BIAS-TEE) is showed, where
the previously mentioned connections are appreciated:
Figure 1.1 Bias Insertion Tee. BIAS-TEE
Bias Inserter Tee (BIAS-TEE)
Page 4
2 Technical features
2.1 BIAS-TEE
Item
Feature
Frequency range
From 10 to 6000 MHz
Insertion loss
typ. 0.6 dB @ 10 MHz
typ. 0.6 dB @ 2000 MHz
typ. 0.6 dB @ 4000 MHz
typ. 0.8 dB @ 6000 MHz
Max. RF Power
1 W
Isolation (RF-DC)
30dB
Supply voltage range
From +9V to +30V DC
Current Rating
500mA max.
DC input connector
LEMO 1B of 4 pins
RF&DC connector
N female, 50 Ohms(Other under request)
RF connector
N male, 50 Ohms(Other under request)
Size
Width: 50mm
Height: 30mm (without connectors)
Depth: 22mm
Table 1 Bias Tee features
2.1.1 Insertion loss
Bias Inserter Tee (BIAS-TEE)
Page 5
2.2 EGG and FGG Lemo connectors
Power supply connectors
Item
Features
Connector type
4 pin Lemo 1B
Part number (panel connector)
ECG.1B.304
Part number (cable connector)
FGG.1B.304.CLAD52
Table 2: Power supply connection technical features
Power supply connector pinout
Pinout
Figure 2.1: Connector pinout
Pin
Description
1
GND
2
GND
3
+ VCC
4
+ VCC
Table 3: Power supply connector pinout
Page 6
NOTES:
Page 7
End note
At SVP Broadcast Microwave S.L. we make a constant effort to continuously
improve our equipments and models.
For that reason, please understand that there may be some changes in
design, equipment and technology. Therefore, we cannot be held liable for
the data, figures and descriptions given in this datasheet.
The datasheet’s text, figures and standards are based on the information we
had when the datasheet was published.
Reprinting, reproduction and translation of all or part of this datasheet is
forbidden without written permission by SVP Broadcast Microwave S.L.
SVP Broadcast Microwave S.L. reserves all copyrights.
All right to make changes are reserved.
SVP Broadcast Microwave reserves the right to make changes to this user’s
guide and the device without prior warning.
C/Zubiaurre, 7 bajo
48215 Iurreta
Vizcaya – España
Tel: +34 94 620 3722
Fax: +34 94 620 4356
[email protected]
www.svpbm.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

SVP AEROSPACE Bias Inserter Tee User manual

Bias Inserter Tee
Brand
SVP AEROSPACE
Model
Bias Inserter Tee
Type
User manual

SVP AEROSPACE Bias Inserter Tee allows you to power equipment, like LNAs or down-converters, connected to the other end of a coaxial cable. It features a frequency range of 10 to 6000 MHz, an insertion loss of typically 0.6 dB at 10 MHz to 4000 MHz and 0.8 dB at 6000 MHz, a maximum RF power handling of 1W, and an isolation of 30 dB. It has an EGG Lemo female connector for DC power input with a maximum rating of 30 V / 1A, an N female connector for RF output, and an N male connector for RF input.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents