Version
V3.0 0223
Everything you need
for your Front Lod
Wshing Mchine
is in this User Mnul
Model/s
EFLW500
EFLW600
EFLW800
Congratulations on purchasing your new Front Load Washing Machine.
The Esatto brand is proudly distributed within Australia by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information regarding
your product’s parts and labour warranty, or visit us online at:
www.residentia.group
At Residentia Group, we are customer obsessed and our Support Team are there to
ensure you get the most out of your appliance. Should you want to learn more about
your new appliance, it's features or importantly taking care of the appliance, our
Support Team are here to help.
You can use our online Support Centre at anytime by visiting:
http://support.residentiagroup.com.au
Or you can contact us via phone by dialing: 1300 11 HELP (4357).
It is important that you read through the following use and care manual thoroughly to
familiarise yourself with the installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Esatto appliance and we look forward
to being of service to you.
Kind Regards,
The Residentia Team
Residentia Group
—
Head Office
165 Barkly Avenue
Burnley, Victoria
Australia 3121
—
ACN
600 546 656
—
Online
residentia.group
www.esatto.house
@esatto.house
—
Postage
PO Box 5177
Burnley, Victoria
Australia 3121
—
Telephone
1300 11 4357
Welcome
esatto.house
3
Contents: Pge:
Sfety Instructions 4
Your Wshing Mchine 6
Instlltion 7
Operting Instructions 10
Clening & Mintennce 18
Troubleshooting 20
Technicl Specictions 22
Your Receipt 24
Wrrnty Informtion 26
Purchse Detils 27
User Manual
4
For your sfety, the informtion in this mnul must be
followed to minimise the risk of re or explosion, electric
shock, or to prevent property dmge, personl injury or
loss of life.
• This pplince is not intended for use by
persons(including children) with reduced physicl,
sensory or mentl cpbilities or lck of experience nd
knowledge unless they hve been given supervision or
instruction concerning the use of the pplince by
person responsible for their sfety.
• Children should be supervised to ensure tht they do
not ply with the pplince.
• If the supply cord is dmged, it must be replced by
the mnufcturer, its service gent or similrly qulied
persons in order to void hzrd.
• The new hose-sets supplied with the pplince re to be
used nd the old hose-sets should not be reused.
• The openings must not be obstructed by crpet.
Model Washing
Capacity
Water
Pressure
EFLW500 5.0kg 0.05-1MPa
EFLW600 6.0kg 0.05-1MPa
EFLW800 6.0kg 0.05-1MPa
Explntion of the following signl words:
WARNING!
This signl word indictes potentilly dngerous sitution
which my result in deth or serious injuries unless it’s
voided.
CAUTION!
This signl word indictes potentilly dngerous sitution
which my result in slight or minor injuries or dmge to
property nd the environment.
NOTE!
This signl word indictes potentilly dngerous sitution
which my result in slight or minor injuries.
WARNING!
POTENTIAL ELECTRIC SHOCK
• This pplince is for indoor & domestic use only.
• Do not position wshing mchine in humid loction.
• If the supply cord is dmged, it must be replced by
the mnufcturer, its service gent or similrly qulied
persons in order to void hzrd.
• Dmge due to improper use or repirs mde by
unqulied personnel will void your wrrnty. The
producer will ssume no libility for ny eventul
dmges cused by misuse of the product or
noncomplince with these instructions.
• The new hose-sets supplied with the pplince re
to be used nd the old hose-sets should not be reused.
• Before performing ny mintennce on the device,
unplug the pplince from the mins.
• Alwys unplug the mchine nd turn o the wter
supply fter use. The mx. inlet wter pressure, in
pscls. The min. inlet wter pressure, in pscls.
• To ensure your sfety, power plug must be inserted into
n erthed three-pole socket. Check crefully nd mke
sure tht your socket is properly nd relibly erthed.
• Mke sure tht the wter nd electricl devices must
be connected by qulied technicin in ccordnce
with the mnufcturer's instructions nd locl sfety
regultions.
Sfety Instructions
esatto.house
5
RISK TO CHILDREN
• This pplince is not intended for use by persons
(including children) with reduced physicl, sensory
or mentl cpbilities or lck of experience nd
knowledge unless they hve been given supervision or
instruction concerning the use of the pplince by
person responsible for their sfety.
• Children of less thn 3 yers of ge should be supervised
to ensure they do not ply with the pplince.
• The glss door my be very hot during the opertion.
Keep kids nd pets fr wy from the mchine during
the opertion very wet rooms s well s in the rooms
with explosive or custic gs.
• Remove ll pckging nd trnsport bolts before using
the pplince. Otherwise, serious dmge my result.
• Plug must be ccessible fter instlltion.
RISK OF EXPLOSION
• Do not wsh or dry rticles tht hve been clened in,
wshed in, soked in, or dbbed with combustible or
explosive substnces( such s wx, oil, pint, gsoline,
degresers, dry-clening solvents, kerosene, etc.)
This my result in re or explosion.
• Before hnd, thoroughly rinse items of wshing by hnd.
RISK OF DAMAGING THE APPLIANCE
• Your product is only for home use nd is only designed
for the textiles suitble for mchine wshing.
• Do not climb up nd sit on top cover of the mchine.
• Do not len ginst mchine door.
• Cutions during Hndling Mchine:
1. Trnsport bolts shll be reinstlled to the mchine
by specilised person.
2. The ccumulted wter shll be drined out
of the mchine.
3. Hndle the mchine crefully. Never hold ech
protruded prt on the mchine while lifting.
Mchine door cn not be used s the hndle
during the conveynce.
4. This pplince is hevy. Trnsport with cre.
• Do not close the door with excessive force. If it is
dicult to close the door, check if there re clothes
obstructing the sel.
• Do not wsh crpets.
OPERATING THE APPLIANCE
• Before wshing the clothes t rst time, the product
should be operted in one round of the whole
procedures without the clothes inside.
• Do not wsh mmble nd explosive or toxic solvents.
• Do not use gsoline nd lcohol etc. s detergents.
Plese only select the detergents suitble for mchine
wshing, especilly for drum.
• Mke sure tht ll pockets re emptied. Shrp nd rigid
items such s coins, screws or stone etc. my cuse
serious dmges to this mchine.
• Plese check whether the wter inside the drum hs
been drined before opening its door. Plese do not
open the door if there is ny wter visible.
• Be creful of burning when the product drins hot
wshing wter.
• Never rell the wter by hnd during wshing.
• After the progrm is completed, plese wit for two
minutes to open the door.
DISPOSAL
Do not dispose this product s unsorted municipl wste.
Collection of such wste seprtely for specil tretment
is necessry.
By ensuring this product is disposed correctly, you will
help prevent potentil negtive consequences for the
environment nd humn helth, which could otherwise be
cused by inpproprite wste hndling of this product.
The symbol on the product indictes tht this product
my not be treted s household wste. Insted it shll
be hnded over to the pplicble collection point for the
recycling of electricl nd electronic equipment. Disposl
must be crried out in ccordnce with locl environmentl
regultions for wste disposl. For more detiled
informtion bout tretment, recovery nd recycling of
this product, plese contct your locl city oce, your
household wste disposl service or the shop where you
purchsed the product
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin,brooch,nail,screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.Please do not open
the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never refill the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or
human health from uncontrolled waste disposal,recycle
it responsibly to promote the sustainable reuse of
material resources.To return your used device, please use
the collection systems or contact the retailer where the
product was purchased. They return and can take this
product for environmental safe recycling.
Packaging/Old appliance
SAFETY INSTRUCTIONS
6
User Manual
6
PRODUCT DESCRIPTION
NOTE!
The imges in this user mnul re for reference only. Your pplince my pper dierently.
ACCESSORIES
NOTE!
If the drin hose is lredy instlled on the mchine, then there is no spring clmper nd drin hose in the ccessories.
Your Wshing Mchine
Detergent dispenser Control Pnel
Power supply cord
Service lter
Drin hose
Top cover
Trnsport hole plugs Cold wter supply hose User mnul
Drum
Wter supply hose
Door
Adjustble feet
Accessories
Product Description
Transport
plughole
Supply hose hot
water (optional)
Supply hose
cold water
Drain hose
(optional
support
)
• The product line chart is for reference only, please refer to real product as
standard.
Note!
Drum
Power supply cord
Control panel
Detergent dispenser
Service filter
Door
Water supply hose
Top cover
Drain hose
Owner’s manual
INSTALLATION
7
Accessories
Product Description
Transport
plughole
Supply hose hot
water (optional)
Supply hose
cold water
Drain hose
(optional
support
)
• The product line chart is for reference only, please refer to real product as
standard.
Note!
Drum
Power supply cord
Control panel
Detergent dispenser
Service filter
Door
Water supply hose
Top cover
Drain hose
Owner’s manual
INSTALLATION
7
Accessories
Product Description
Transport
plughole
Supply hose hot
water (optional)
Supply hose
cold water
Drain hose
(optional
support
)
• The product line chart is for reference only, please refer to real product as
standard.
Note!
Drum
Power supply cord
Control panel
Detergent dispenser
Service filter
Door
Water supply hose
Top cover
Drain hose
Owner’s manual
INSTALLATION
7
esatto.house
7
Instlltion
INSTALLATION INSTRUCTIONS
IMPORTANT!
If the power cord is dmged, it must be replced by Residenti Group or one of
it’s uthorised service representtives. Plese contct 1300 11 HELP (4357) nd
ensure the pplince is completely disconnected from the power supply.
WARNING!
• Stbility is importnt to prevent the product from moving!
• Mke sure tht the product should not stnd on the power cord.
Before instlling the mchine, the loction must be:
1. Rigid, dry, nd level surfce
2. Avoiding direct sunlight
3. Sucient ventiltion
4. Room temperture is bove 0 °C
5. Kept fr wy from the het resources such s col or gs.
UNPACKING THE WASHING MACHINE
WARNING!
• Pckging mteril (e.g. Films, Styrofom) cn be dngerous for children.
• There is risk of suoction! Keep ll pckging well wy from children.
1. Remove the crdbord box nd styrofom pckging.
2. Lift the wshing mchine nd remove the bse pcking.
Ensure the smll tringle fom t the bse of the mchine is removed.
If not, ly the unit down on its side surfce, then remove the smll fom
from the unit bottom mnully.
3. Remove the tpe securing the power supply cord nd drin hose.
4. Remove the inlet hose from the drum.
5. Remove the trnsporttion bolts.
WARNING!
• You must remove the trnsport bolts from the rer of the mchine operting
the pplince
• You’ll need the trnsport bolts gin if you move the pplince, so ensure
tht they re kept in sfe plce.
Plese tke the following steps to remove the bolts:
1. Loosen 4 bolts with spnner nd then remove them.
2. Stop the holes with trnsport hole plugs.
3. Keep the trnsport bolts properly for future use.
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
INSTALLATION
w
w
W> 20mm
Installation area
8
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
INSTALLATION
w
w
W> 20mm
Installation area
8
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
INSTALLATION
w
w
W> 20mm
Installation area
8
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
INSTALLATION
w
w
W> 20mm
Installation area
8
User Manual
8
Instlltion (Continued)
LEVELLING THE WASHING MACHINE
WARNING!
The lock nuts on ll four feet must be screwed tightly ginst the housing
1. Check if the legs re closely ttched to the cbinet.
If not, plese turn them to their originl positions tighten the nuts.
2. Loosen the lock nut turn the feet until it is closely in contcts with the oor.
3. Adjust the legs nd lock them with spnner.
Mke sure the mchine is stedy.
CONNECT WATER SUPPLY HOSE
WARNING!
• To prevent lekge or wter dmge, follow the instructions in this chpter.
• Do not kink, crush, modify or sever the wter inlet hose.
• For the model equipped with hot vlve, connect it to hot wter tp with
hot wter supply hose. Energy consumption will decrese utomticlly for
some progrms.
Connect the inlet pipe s indicted, There re two wys to connect the inlet pipe.
1. Connection between ordinry tp nd inlet hose.
2. Connection between screw tp nd inlet hose.
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
) Loosen clmp nut
nd four bolts
b) Tighten clmp nut d) Connection nishedc) Press slide bushing,
insert inlet hose into
connecting bse
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
9
9
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234
1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
9
Tap with threads and inlet hose Special tap for washing machine
esatto.house
9
Connect the other end of inlet pipe to the inlet vlve t the bckside of product
nd fsten the pipe tightly clockwise.
DRAIN HOSE
WARNING!
• Do not kink, crush, modify, sever or protrct the drin hose.
• Position drin hose properly, otherwise dmge might result of wter lekge.
There re two wys to plce the end of drin hose:
NOTE!
If the mchine hs drin hose support, plese instll it like the following:
WARNING!
• When instlling drin hose, x it properly with cble tie.
• If drin hose is too long, do not force it into wshing mchine s it will cuse bnorml noises.
1. Put it into the wter trough. 2. Connect it to the brnch drin pipe of the trough.
Warning!
！！
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning!
！！
Note!
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
10
Warning!
！！
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning!
！！
Note!
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
10
Warning!
！！
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning!
！！
Note!
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
10
Warning!
！！
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning!
！！
Note!
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
10
Warning!
！！
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning!
！！
Note!
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
10
User Manual
10
FIRST TIME USE
CAUTION!
• Prior to using the wshing mchine, ensure tht it is correctly instlled.
Before rst use, the wshing mchine must perform one cycle without ny clothes inside using the following steps:
1. Connect the power source nd wter.
2. Insert smll mount of detergent into the detergent drwer nd close it.
3. Turn the Progrm dil to select ny progrm. ‘Cotton 60° C’ progrm is recommended.
4. Press the “Strt/Puse” button on the pplince.
5. Allow the progrm to complete its full cycle.
6. Your mchine is now redy for use.
PREPARATION PROCEDURE FOR WASHING YOUR LAUNDRY
NOTE!
Detergent only need to be dded in "Cse I" fter selecting pre-wshing for mchines with this function.
WASHING
NOTE!
The imges in this user mnul re for reference only. Your pplince my pper dierently.
AFTER WASHING
The pplince will sound n lert nd the disply with show "End" fter wshing cycle is complete.
nd the power supply will be powered o utomticlly. Then unlod your lundry.
Plug in
Power On Strt upSelect Progrm Select ny dditionl functions
or leve for defult settings
Open tp Add detergentLod lundry nd close door
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Buzzer beep or “End” on display.
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
3. After Washing
• Detergent only need to be added in "case I "after selecting pre-washing for
machines with this function.
1122334455
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
• 1.
The function button line chart is for reference only, please refer to real product
as standard.
If default is selected, step 3 can be skipped.
2.
Note!
Note!
Caution!
OPERATIONS
Main
wash
Prewash
Softener
11
Operting Instructions
esatto.house
11
WASHING CONSIDERATIONS
• The working condition of the wsher should be (0-40)°C. If used under 0°C, the inlet vlve nd drining
system my be dmged. If the mchine is plced under condition of 0°C or less, then it should be trnsferred
to norml mbient temperture to ensure the wter supply hose nd drin hose re not frozen before use.
• Plese check the lbels nd the explntion of using detergent before wsh. Use non-foming or less-foming
detergent suitble for mchine wshing properly.
NOTE!
When wshing single item, we recommend dding one or two more lundry items to your lod to void the
mchine from being unblnced, llowing for smooth undisrupted cycle nd smooth drining process.
WARNING!
Do not wsh clothes tht hve come into contct with kerosene, gsoline, lcohol nd other mmble mterils.
THE USAGE OF DETERGENT AND WASHING POWDER
• Before mchine wshing powder or fbric softener is poured into the detergent box, we recommend tht
you use some wter for dilution to prevent the inlet of the detergent box from being blocked nd overowing
while lling wter.
• Plese choose suitble type of detergent for the vrious wshing temperture to get the best wshing
performnce with less wter nd energy consumption.
Check the lbel
for wshing dvice
Put smll clothes
into wsh bg
Tke items out of
the pockets
Turn esy-pilling nd
long-pile fbric inside out
Knot long strings
or ribbons, close zippers,
nd do up buttons
Seprte clothes with
dierent textures
User Manual
12
Operting Instructions (Continued)
THE DETERGENT DISPENSER
CAUTION!
Detergent only need to be dded in "Cse I" fter selecting pre-wshing for mchines with this function.
PROGRAM III
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Caution!
OPERATIONS
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
Note!
Programme
Cotton(Cold)
Cotton (20℃)
Cotton (40℃)
Cotton( 60℃)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90℃
Mix( 60℃)
Mix( 40℃)
Mix( 20℃)
Rapid 45’
Quick 15’
13
Cotton (Cold) Detergent optional Detergent required Softener optional
Cotton (20°C) Detergent optional Detergent required Softener optional
Cotton (40°C) Detergent optional Detergent required Softener optional
Cotton(60°C) Detergent optional Detergent required Softener optional
Jeans Detergent optional Detergent required Softener optional
Delicate — Detergent required Softener optional
Cotton ECO — Detergent required Softener optional
Spin Only ———
Rinse & Spin — — Softener optional
Hot 90°C Detergent optional Detergent required Softener optional
Mix(60°C) Detergent optional Detergent required Softener optional
Mix(40°C) Detergent optional Detergent required Softener optional
Mix(20°C) Detergent optional Detergent required Softener optional
Rapid 45 Detergent optional Detergent required Softener optional
Quick 15 — Detergent required Softener optional
THE USAGE OF DETERGENT AND WASHING POWDER
• Before mchine wshing powder or fbric softener is poured into the detergent box, we recommend tht
you use some wter for dilution to prevent the inlet of the detergent box from being blocked nd overowing
while lling wter.
• Plese choose suitble type of detergent for the vrious wshing temperture to get the best wshing
performnce with less wter nd energy consumption.
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Caution!
OPERATIONS
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
Note!
Programme
Cotton(Cold)
Cotton (20℃)
Cotton (40℃)
Cotton( 60℃)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90℃
Mix( 60℃)
Mix( 40℃)
Mix( 20℃)
Rapid 45’
Quick 15’
13
Pre wsh detergent
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Caution!
OPERATIONS
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
Note!
Programme
Cotton(Cold)
Cotton (20℃)
Cotton (40℃)
Cotton( 60℃)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90℃
Mix( 60℃)
Mix( 40℃)
Mix( 20℃)
Rapid 45’
Quick 15’
13
Min wsh detergent
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Caution!
OPERATIONS
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
Note!
Programme
Cotton(Cold)
Cotton (20℃)
Cotton (40℃)
Cotton( 60℃)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90℃
Mix( 60℃)
Mix( 40℃)
Mix( 20℃)
Rapid 45’
Quick 15’
13
Softener
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Caution!
OPERATIONS
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are
poured the detergent box, it is suggested to use some water for
dilution to prevent inlet of detergent box from being blocked and
overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.
Note!
Programme
Cotton(Cold)
Cotton (20℃)
Cotton (40℃)
Cotton( 60℃)
Jeans
Delicate
Cotton ECO
Spin Only
Programme
Rinse&Spin
Heat Wash 90℃
Mix( 60℃)
Mix( 40℃)
Mix( 20℃)
Rapid 45’
Quick 15’
13
esatto.house
13
THE CONTROL PANEL
NOTE!
The imges in this user mnul re for reference only.
Your pplince my pper dierently.
Turn the Progrm dil
to select your wsh
progrm type.
PROGRAM
After selecting your desired
wsh settings, press this button
to strt your wsh cycle.
You cn lso use this button
to puse the wshing mchine
during opertion.
START / PAUSE
The wshing mchine
is powered o.
OFF POSITION
You cn choose the optionl progrm
buttons to set your desired speed, dely
time nd dditionl functions ccording
to your lundry needs.
OPTIONAL PROGRAMS
User Manual
14
WASHING PROGRAMS
• COTTON
The cotton wshing progrms re suitble to wsh
durble, het-resistnt textiles mde of cotton or linen.
• JEANS
Suitble for wshing ll types of denim.
• DELICATE
This progrm hs gentle wter ow. Suitble for
delicte, wshble textiles such s silk, stin, synthetic
bres or blended fbrics.
• COTTON ECO
This progrm uses lower tempertures nd less wter
over longer time thn the stndrd Cotton progrm.
By using less energy over n extended period mkes it
more economicl.
• SPIN ONLY
This progrm spins the lod t the selected spin speed
chosen. This setting cn be used fter wsh to remove
excess wter. However, the clothing will not be fully dry.
• RINSE & SPIN
This progrm simply rinses the lod nd then spins it.
This setting doesn’t use ny form of detergent nd isn’t
used s form of deep clening. It rinses the clothing
with clen wter nd then spins t fst speed to
remove ny moisture from the lod.
Suppose you hve llergies or sensitive skin tht cn be
irritted by wshing detergent. In tht cse, this form of
rinse cn be helpful to run fter wsh to remove ny
detergent residue left on clothing.
• HOT 90°C
This progrm should be reserved for brightening whites,
removing stubborn stins on cotton or linen, killing
bcteri on hevily soiled items or performing routine
drum clen mintennce wsh on your mchine.
CAUTION! Hot wter cn shrink nd dmge clothes,
even cusing the colours to fde with some fbrics.
To prevent this dmge to your lundry, plese red
the lbels on your clothing to see if they re suitble for
high tempertures before choosing this progrm.
• MIX
This progrm is suited for mixed fbric lods tht
require more intense clening cycle. Ensure lbel
wrnings on grments re conformed to.
• RAPID 45
Suitble to wsh lightly dirty clothes quickly.
• QUICK 15
Suitble for light lods with light soiling of which you
would like to be clened quickly. This setting performs
better when loded lightly, s it is fst spin. This
setting is perfect if you hve wshing emergency nd
need piece of clothing s quickly s possible. This is
cold wsh, therefore energy-ecient.
OPTIONAL WASHING PROGRAMS
• SPEED
Press this button to select your desired mount of times
to spin.
• DELAY
After choosing your wsh settings, press the Dely
button to choose delyed strt time of up to 24 hours.
• PREWASH
This progrm provides n extr cycle for hevily or
excessively soiled clothing on low temperture before
the primry wsh cycle begins. This will give deeper
wsh of your clothing.
NOTE! You need to put detergent into the Cse (I)
when it is selected
• EXTRA RINSE
This function dds n extr rinse cycle to your progrm.
It is idel for lrge lods nd grments belonging to
people with sensitive skin. But you should be wre tht
this function will increse wter consumption.
• CHILD LOCK
Simultneously press the Dely nd Function
buttons for 3 seconds until you her 3 beeps to ctivte
the child lock. Repet this process to dectivte the
child lock.
When you progrm hs nished, "END" nd "CL" will
sh lterntively on your disply.
Operting Instructions (Continued)
esatto.house
15
MODEL: EFLW500
PROGRAM LOAD TEMP. °C DEFAULT TIME DEFAULT SPEED
RPM DELAY EXTRA RINSE PREWASH
Cotton (Cold) 5.0 Cold 2:20 1000 Optionl Optionl Optionl
Cotton (20°C) 5.0 20 2:20 1000 Optionl Optionl Optionl
Cotton (40°C) 5.0 40 2:40 1000 Optionl Optionl Optionl
Cotton (60°C) 5.0 60 2:45 1000 Optionl Optionl Optionl
Jens 5.0 60 1:45 1000 Optionl Optionl Optionl
Delicte 2.5 30 0:50 600 Optionl Optionl —
Cotton ECO 5.0 60 6:15 1000 Optionl — —
Spin Only 5.0 — 0:12 1000 Optionl — —
Rinse & Spin 5.0 — 0:20 1000 Optionl Optionl —
Hot 90°C 5.0 90 2:17 1000 Optionl Optionl Optionl
Mix (60°C) 5.0 60 1:30 1000 Optionl Optionl Optionl
Mix (40°C) 5.0 40 1:20 1000 Optionl Optionl Optionl
Mix (20°C) 5.0 20 1:00 1000 Optionl Optionl Optionl
Rpid 45 2.0 40 0:45 800 Optionl Optionl Optionl
Quick 15 2.0 — 0:15 800 Optionl — —
Energy test progrm: Cotton ECO.
Speed: the highest speed; Other s the defult.
Hlf lod for 5.0Kg mchine: 2.5KG.
"Cotton ECO" is the stndrd wshing progrms to which the informtion in the lbel nd the che reltes, nd they re
suitble to clen normlly soiled cotton lundry nd tht they re the most ecient progrmmes in terms of combined
energy nd wter consumptions for wshing tht type of cotton lundry, tht the ctul wter temperture my dier
from the declred cycle temperture.
NOTE!
• The prmeters in this tble re only for user's reference. The ctul prmeters mybe dierent with the prmeters
in bove mentioned tble.
• Some models hve intelligent weighing function, plese refer to the ctul product.
User Manual
16
MODEL: EFLW600
PROGRAM LOAD TEMP. °C DEFAULT TIME DEFAULT SPEED
RPM DELAY EXTRA RINSE PREWASH
Cotton (Cold) 6.0 Cold 2:20 1000 Optionl Optionl Optionl
Cotton (20°C) 6.0 20 2:20 1000 Optionl Optionl Optionl
Cotton (40°C) 6.0 40 2:40 1000 Optionl Optionl Optionl
Cotton (60°C) 6.0 60 2:45 1000 Optionl Optionl Optionl
Jens 6.0 60 1:45 1000 Optionl Optionl Optionl
Delicte 3.0 30 0:50 600 Optionl Optionl —
Cotton ECO 6.0 30 0:59 800 Optionl — —
Spin Only 6.0 — 0:12 1000 Optionl — —
Rinse & Spin 6.0 — 0:20 1000 Optionl Optionl —
Hot 90°C 6.0 90 2:17 1000 Optionl Optionl Optionl
Mix (60°C) 6.0 60 1:30 1000 Optionl Optionl Optionl
Mix (40°C) 6.0 40 1:20 1000 Optionl Optionl Optionl
Mix (20°C) 6.0 20 1:00 1000 Optionl Optionl Optionl
Rpid 45 2.0 40 0:45 800 Optionl Optionl Optionl
Quick 15 2.0 — 0:15 800 Optionl — —
Energy test progrm: Cotton ECO.
Speed: the highest speed; Other s the defult.
Hlf lod for 6.0Kg mchine: 3.0KG.
"Cotton ECO" is the stndrd wshing progrms to which the informtion in the lbel nd the che reltes, nd they re
suitble to clen normlly soiled cotton lundry nd tht they re the most ecient progrmmes in terms of combined
energy nd wter consumptions for wshing tht type of cotton lundry, tht the ctul wter temperture my dier
from the declred cycle temperture.
NOTE!
• The prmeters in this tble re only for user's reference. The ctul prmeters mybe dierent with the prmeters
in bove mentioned tble.
• Some models hve intelligent weighing function, plese refer to the ctul product.
Operting Instructions (Continued)
esatto.house
17
MODEL: EFLW800
PROGRAM LOAD TEMP. °C DEFAULT TIME DEFAULT SPEED
RPM DELAY EXTRA RINSE PREWASH
Cotton (Cold) 8.0 Cold 2:20 1000 Optionl Optionl Optionl
Cotton (20°C) 8.0 20 2:20 1000 Optionl Optionl Optionl
Cotton (40°C) 8.0 40 2:40 1000 Optionl Optionl Optionl
Cotton (60°C) 8.0 60 2:45 1000 Optionl Optionl Optionl
Jens 8.0 30 1:35 1000 Optionl Optionl Optionl
Delicte 2.5 30 0:50 600 Optionl Optionl —
Cotton ECO 8.0 60 1:15 800 Optionl — —
Spin Only 8.0 — 0:12 1000 Optionl — —
Rinse & Spin 8.0 — 0:20 1000 Optionl Optionl —
Hot 90°C 8.0 90 2:36 1000 Optionl Optionl Optionl
Mix (60°C) 8.0 60 1:30 1000 Optionl Optionl Optionl
Mix (40°C) 8.0 40 1:20 1000 Optionl Optionl Optionl
Mix (20°C) 8.0 20 1:00 1000 Optionl Optionl Optionl
Rpid 45 2.0 40 0:45 800 Optionl Optionl Optionl
Quick 15 2.0 — 0:15 800 Optionl — —
Energy test progrm: Cotton ECO.
Speed: the highest speed; Other s the defult.
Hlf lod for 8.0Kg mchine: 4.0Kg.
"Cotton ECO" is the stndrd wshing progrms to which the informtion in the lbel nd the che reltes, nd they re
suitble to clen normlly soiled cotton lundry nd tht they re the most ecient progrmmes in terms of combined
energy nd wter consumptions for wshing tht type of cotton lundry, tht the ctul wter temperture my dier
from the declred cycle temperture.
NOTE!
• The prmeters in this tble re only for user's reference. The ctul prmeters mybe dierent with the prmeters
in bove mentioned tble.
• Some models hve intelligent weighing function, plese refer to the ctul product.
User Manual
18
Clening Mintennce
CLEANING AND CARE
WARNING!
Before you begin mintennce, plese unplug the mchine nd close the tp.
CLEANING THE CABINET
Proper mintennce on the wshing mchine cn extend its working life. The surfce cn be clened
with diluted non-brsive neutrl detergents when necessry. If there is ny wter overow, use the
wet cloth to wipe it o immeditely. No shrp items re llowed.
NOTE!
Formic cid nd its diluted solvents or equivlent re forbidden, such s lcohol, solvents or chemicl
products, etc.
CLEANING THE DRUM
The rusts left inside the drum by the metl rticles shll be removed immeditely with chlorine-free
detergents. Never use steel wool.
NOTE!
Don’t put lundry in the wshing mchine during the drum clening.
CLEANING THE DOOR SEAL AND GLASS
Wipe the glss nd sel fter ech wsh to remove lint nd stins. If lint builds up it cn cuse leks.
Remove ny coins, buttons nd other foreign objects from the sel fter ech wsh.
CLEANING THE INLET FILTER
NOTE!
Inlet lter must be clened if there is less wter.
Wshing the lter in the tp:
1. Close the tp.
2. Remove the wter supply hose from the tp.
3. Clen the lter.
4. Reconnect the wter supply hose.
Wshing the lter in wshing mchine:
1. Screw o the inlet pipe from the rer of the mchine.
2. Pull out the lter with long pliers.
3. Use brush to clen the lter.
4. Reconnect the inlet pipe.
NOTE!
• If the brush is not clen, you cn pull out the lter wshed seprtely.
• Reconnect, turn on the tp.
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Cleaning The Drum
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products,etc.
•
alcohol,
• Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal And Glass
Warning!
！！
Note!
Note!
Cleaning And Care
The rusts left inside the drum by the metal articles shall be removed immediately
with chlorine-free detergents.
Never use steel wool.
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it
can cause leaks.
Remove any coins, buttons and other objects
from the seal after each wash.
MAINTENANCES
21
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
esatto.house
19
CLEAN THE DETERGENT DISPENSER
1. Press down the rrow loction on softener cover inside
the dispenser drwer.
2. Lift the clip up nd tke out softener cover nd wsh ll
grooves with wter.
3. Restore the softener cover nd push the drwer into
position.
NOTE!
Do not use lcohol, solvents or chemicl products to clen
the mchine.
CLEANING THE DRAIN PUMP FILTER
WARNING!
• Be creful of the hot wter!
• Allow detergent solution to cool down.
• Unplug the mchine to void electricl shock before
wshing.
• Drin pump lter cn lter the yrns nd smll foreign
mtters from the wshing.
• Clen the lter periodiclly to ensure the norml
opertion of wshing mchine.
CLEANING THE DRAIN PUMP FILTER CONT.
CAUTION!
• Mke sure tht vlve cp is reinstlled properly,
cp pltes should be inserted ligning to hole pltes
otherwise wter my lek;
• Rotte lower cover cp directly to mke wter run
into bsin.
• When the pplince is in use nd depending on the
progrm selected there cn be hot wter in the pump.
Never remove the pump cover during wsh cycle,
lwys wit until the pplince hs nished the cycle,
nd is empty. When replcing the cover, ensure it is
securely re-tightened.
1) Pull out the dispenser
drwer with press the A
1) Open the lower
cover cp
2) Clen the dispenser
drwer under wter
2) Rotte 90°C nd tke
o the hose cp
3) Clen inside the recess
with n old toothbrush
3) After wter runs out,
reset the drin hose
5) Remove foreign objects
4) Reinsert the
dispenser drwer
4) Open the lter
by turning it
counter clockwise
6) Close the lower
cover cp
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
22
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
•
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise
Remove extraneous matter
123
Close the lower cover cap
6
5
4
Emergency
drain hose
After water runs out,reset
the drain hose
Warning!
！！
Caution!
MAINTENANCES
23
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
•
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise
Remove extraneous matter
123
Close the lower cover cap
6
5
4
Emergency
drain hose
After water runs out,reset
the drain hose
Warning!
！！
Caution!
MAINTENANCES
23
User Manual
20
Troubleshooting
OPERATION IN CASE OF EMERGENCY
In the event of n emergency you should:
• Switch o ll controls.
• Switch the wshing mchine o t the power point or t the fuse box.
• Cll the Residenti Support Tem on 1300 11 HELP (4357).
Some minor fults cn be xed by referring to the instructions given in the Troubleshooting section
below. There is lso self-help section online t https://support.residentigroup.com.u/
DESCRIPTION POTENTIAL CAUSE SOLUTION
Wshing mchine
does not strt up Door is not closed properly Check if the clothes is stuck.
Restrt fter the door is closed.
Door cn’t be opened Wsher's sfety protection design
is in opertion
Disconnect the power, restrt
the product
Wter lekge The connection between inlet
pipe or outlet hose is not tight
Check nd fsten wter pipes
Clen up outlet hose
Detergent residues
in the box
Detergent is dmpened
or gglomerted Clen nd wipe the detergent box
Indictor or disply
does not light
Disconnect the power
PC bord or hrness hs
connection problem
Check if the power is shut
down nd the power plug is
connected correctly
Abnorml noise Trnsport bolts might still be tted
or mchine is not on solid surfce
Check if the trnsport bolts hve
been removed or if the mchine is
instlled on solid nd level oor
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Esatto EFLW500 User manual
- Category
- Washing machines
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Solt GGSFLW600 Quick start guide
-
Inalto IFLW500 User manual
-
SENZ WM350FL VASKEMASKIN User manual
-
SENZ WM250FL VASKEMASKIN Owner's manual
-
-
-
Solt GGSTLW120RC User manual
-
Midea 360484 User manual
-
Campomatic WM708L Modena (3.02MB) Owner's manual
-
Solt GGSTLW1202RC User manual
