Dometic Part No.3108701.784 For Models RM2612-2852 Control Filter Cable Installation guide

I've reviewed the installation instructions for the Dometic control filter cable kit, designed for RM2612, RM2812, RM2652, and RM2852 refrigerator models. The document outlines a step-by-step procedure to install the filter that reduces AC interference. This filter helps in preventing relays chattering in the power control module. I'm ready to address any inquiries you may have about this process or the product itself.
What does the control cable filter do?

What tools are required for installation?

What is the first step in the installation process?

INSTALLATION INSTRUCTIONS

KIT, CONTROL FILTER CABLE

Part No. 3108701.784

For Models RM2612, RM2812, RM2652 & RM2852

REVISION

Form No. 3106156.015 10/97

(Replaces 3106156.007)

LaGrange, IN 46761

Turn off all AC and DC power to the refrigerator.

Remove the cover from power module located on the back of the refrigerator.

Depress the latch on the control cable and unplug it from the power module.

Plug the control cable into the control cable filter.

Plug the control cable filter into the power module.

Replace the cover on the power module.

Turn on the AC and DC power to the refrigerator.

Test for proper operation.

INSTALLATION

TOOLS REQUIRED:

Screwdriver

The control cable filter is designed to absorb some of the AC interfer-

ence that causes chattering of relays on the power control module.

THIS KIT CONTAINS:

(1)Control Cable Filter

(1)3106156.015 Installation Instructions