OPERATING
INSTRUCTIONS
1. Holding the timer, with the dial facing you, firmly
depress the green segments that surround the dial to
your required on and off settings. For instance if you
require the timer program to run from 6am to 8am,
firmly depress every segment between these two
points. Each segment is worth 15 minutes.
2. Set the time of day by
turning the dial clockwise
until the correct time is in
line with the arrow mark
on the dial.
3. Plug the timer into the socket. Plug the
appliance into the timer and switch on at
the socket and the appliance.
4. Your appliance can be turned on
manually by using the override switch on
the side of the unit. By switching the switch
up the timer will be ‘On’ permanently.
5. The program will be repeated each
day if the timer is left plugged in, with the
socket turned on and the timer switch is
left in the down position.
T73A-C New Clam Card.qxp_Layout 1 23/02/2017 13:35 Page 2
-
1
