2. WISDOM Audio
  3. Cinema Hybrid Line Source

WISDOM Audio Cinema Hybrid Line Source User guide

  • Hello! I've analyzed the provided wiring guide for the Wisdom Audio SAGE CINEMA HLS speaker system. This guide explains the necessary wiring connections, including routing wires through the center module and using jumper wires for the line modules. I'm ready to answer your questions about the wiring process or other details described in the document.
  • How many pairs of speaker wires are needed?
    Where do you route the speaker wires?
    What are the jumper wires(fly leads) used for?
All specifications are subject to change at any time in order to improve the product.
Wisdom Audio | 1572 College Parkway, Suite 164 | Carson City, NV 89706 | 775-887-8850 | information@wisdomaudio.com | www.wisdomaudio.com
© 2018 Wisdom Audio Corporation. All rights reserved. Wisdom and the Wisdom logo are registered trademarks of Wisdom Audio
SAGE CINEMA HLS QUICK LOOK WIRING GUIDE
NOTE: Binding posts terminal covers removed for clarity
Three pairs of speaker wires from the amplifier
are needed. One for Low, one for Mid, and one
for High. Route wires through the access panel
in the rear of the Center Module
First connect to the Center Module from the
amplifier.
Then connect from the Center Module to the
Line Modules on either side using the included
jumper wires (fly leads).
/