Ohio Steel 3460H-ATV Operating instructions

Brand: Ohio Steel

Model: 3460H-ATV

Type: Operating instructions

Ohio Steel 3460H-ATV is a versatile all-terrain cart designed to handle various tasks with a substantial 1500-pound load capacity. Its sturdy construction and large 20 cubic feet heaped capacity make it suitable for hauling heavy items, equipment, or materials across challenging terrains. The cart's maneuverability is enhanced by its four wheels, allowing for easy navigation in tight spaces or uneven surfaces.

Ohio Steel 3460H-ATV is a versatile all-terrain cart designed to handle various tasks with a substantial 1500-pound load capacity. Its sturdy construction and large 20 cubic feet heaped capacity make it suitable for hauling heavy items, equipment, or materials across challenging terrains. The cart's maneuverability is enhanced by its four wheels, allowing for easy navigation in tight spaces or uneven surfaces.

3460HATV

20 CU. FT. HEAPED CAPACITY

ALL TERRAIN CART

ASSEMBLY MANUAL AND PARTS LIST

2575 FERRIS ROAD

COLUMBUS, OHIO 43224-2597

3460HATV-REV-N/C 5/04

REPAIR PARTS LIST

5. Refer to repair parts list below. Attach hitch bracket to drawbar with two 3/8" x 3/4" hex

bolts and keps nuts as shown. Insert hitch pin and lock in place with hairpin provided.

1

2

3

4

5

5

6

7

8

9

10

11

12

13

14

15

16

17

18

30

31

17

17

17

* denotes standard hardware item, can be purchased locally.

CAUTION:

READ AND FOLLOW

ALL SAFETY RULES

AND INSTRUCTIONS

BEFORE USING

THIS EQUIPMENT.

FRONT SUPPORT

WELDMENT

3/8" KEPS NUT

3/8" HEX BOLT

FRONT SUPPORT

BACKING PLATE

1. Attach front support and front support

backing plate to cart body as shown with

three 3/8" x 3/4" hex head bolts and

3/8" keps nuts.

4

17

STEP 1.

AXLE HOLDER

PLATES

3/8" HEX BOLT

3/8" KEPS NUT

2. Loosely attach the four axle holder plates with the

3/8"x 3/4" hex head bolts provided. NOTE: these bolts

will be tightened after axle and wheels are installed in

a later step.

18

17

5

STEP 2.

AXLE

DRAWBAR

3. Center drawbar tube between axle holder plates and

insert axle, making sure to center axle so that wheels

can be put on in the next step.

7

12

18

3

14

8

15

13

STEP 3.

COTTER PIN

TIRE

AXLE SPACER

AXLE WASHER

COTTER PIN

AXLE WASHER

AXLE SPACER

4. Slide axle washer and axle spacer over each side

of axle as shown. Add wheels making sure valve stem

faces out. Insert cotter pin in axle and lock in place by

spreading ends. Turn cart upright and add tailgate.

13

15

14

STEP 4.

SAFETY INSTRUCTION

MAINTENANCE

CHECK TIRE PRESSURE REGULARLY.

PERIODICALLY CHECK ALL BOLTS.

KEEP CART CLEAN TO PREVENT RUST.

STORE INSIDE A CLEAN DRY AREA.

DO NOT CARRY PASSENGERS IN CART.

DO NOT TOW CART ON PUBLIC ROADS.

NEVER EXCEED LOAD CAPACITY - 1500LBS.

AVOID SUDDEN TURNS OR MANEUVERS.

WHEN OPERATING ON SLOPES, USE LOWEST

GROUND SPEED AND LIMIT LOAD TO 200LBS.

OPERATE UP AND DOWN SLOPES, NEVER

ACROSS THE FACE.

TOOLS REQUIRED

7/16" WRENCH AND SOCKET

9/16" WRENCH AND SOCKET

PLIERS

1
2

Ohio Steel 3460H-ATV Operating instructions

Brand: Ohio Steel

Model: 3460H-ATV

Type: Operating instructions

Ohio Steel 3460H-ATV is a versatile all-terrain cart designed to handle various tasks with a substantial 1500-pound load capacity. Its sturdy construction and large 20 cubic feet heaped capacity make it suitable for hauling heavy items, equipment, or materials across challenging terrains. The cart's maneuverability is enhanced by its four wheels, allowing for easy navigation in tight spaces or uneven surfaces.

Related papers

Other documents