Product Guide
CONTEC CO., LTD.
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
https://www.contec.com/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA05995 (LYVR112) 03202018_rev2 [12252017] March 2017 Edition
Optional SD Card
For FUJITSU Cloud Service IoT Platform
CPS-SD-FUJ-01
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
Before using the product, be certain to read the Setup Guide that included in the package
or can be obtained from the Contec website in order to operate the product properly.
To use this product, the license of “FUJITSU Cloud Service IoT Platform” by FUJITSU LIMITED
is required. Refer to the link below for the information of the “FUJITSU Cloud Service IoT
Platform”.
Website
http://www.fujitsu.com/global/themes/internet-of-
things/solutions/cloud-iot-platform/
About Manual
The following manuals come with this product or can be download from the Contec website.
Read them before using the product.
Name
Contents
How to get
Product Guide
The product outline and precautions are de-
scribed.
Included in the package
(Printed matter)
Setup Guide
How to set up the product is described.
Included in the package
(Printed matter)
Download
https://www.contec.com/download/search/
Inquiry
Contact the sales representative you purchased the product from if you have any questions.
Regarding the ”FUJITSU Cloud Service IoT Platform” setup, refer to the document supplied
by FUJITSU LIMITED
1. About the Product
This is an optional SD card for providing the function to CONPROSYS M2M controller series
or M2M gateway series to communicate with the FUJITSU Cloud Service IoT Platform of
FUJITSU LIMITED.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete.
Product...1
Product Guide...1
(This leaflet)
Warranty Certificate...1
Serial Number Label...1
Setup Guide...1
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious in-
jur y.
CAUTION
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate in-
jury or in property damage.
Handling Precautions
This product is not produced or intended to be used for controlling of equipment directly
concerned with human life (*1) or maintenance of public services/functions involving fac-
tors of safety (*2). Do not use the product in such applications.
*1: Such as medical equipment of life-sustaining devices or surgical tools.
*2: Such as controlling system and security check for nuclear power plant, public transport,
and air traffic where safety is critical.
WARNING
Do not modify the product. Doing so may cause fire, electric shock.
If smoke or abnormal odor is detected, immediately turn off the PC and peripheral de-
vices and unplug the power cables.
Never touch this product with wet hands. Doing so can short-circuit the product to cause
fire, electric shock, and/or failure.
CAUTION
This is a precision product. Do not strike or bend the product. Otherwise, it leads to
malfunction.
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes. It may cause
malfunction, heat, or damage.
Do not use or store this product in a location exposed to direct sun or in the vicinity of a
heat source such as a stove. It may cause malfunction, or damage.
Do not use this product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause this product to malfunction.
Do not use or store this product in the presence of chemicals.
Do not touch metal parts or terminals of the product with your hands in operation. Oth-
erwise, this product may malfunction.
Before handling the product, touch a metal object around to release any built-up static
charge from your body to prevent the product from being damaged by static electricity.
It is limited in the number of cycles they can be written due to the nature of its memory
used.
Do not turn off the power during SD Memory Card access (writing). Doing so may break
the data.
Do not insert or remove the card into/from a computer in operation.
This product is designed to be plugged only in one orientation. Do not force it to be
plugged in.
Do not modify or disassemble the product. CONTEC is not liable for any modifications
or disassembly.
This leaflet must accompany the product upon assigning or transferring.
No part of this document may be copied or reproduced in any form by any means with-
out prior written consent of CONTEC CO., LTD.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should
you notice an omission or any questionable item in this document, please contact your
retailer.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-
ever (including damages for loss of business profits) arising out of the use or inability to
use this CONTEC product or the information contained herein.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the rele-
vant laws and municipal ordinances.
4. Features
Conforming to the SD Memory Card standard
Containing no rotating or moving part as in hard disk drives, thus best suited for appli-
cations which require high environmental resistance (to temperature, humidity, vibra-
tion, shock) and for continuous operation for extended periods of time.
Never making any sound such as motor rotation sound or access noise during seeking,
thus best suited for applications which require complete silence.
Featuring greater reliability, writing sequences, and increased number of rewriting with
SLC (Single Level Cell), NAND type flash memory, it is more suited than MLC (Multi
Level Cell) for industrial applications.
Power consumption is reduced by eliminating a rotating or moving part.
5. Specification
Item
Specification
Type
CPS-SD-FUJ-01
User area capacity *1
1,800MB
Interface
SD Memory Card interface
Read(Sequential) *2
18MByte/sec
Write(Sequential) *2
12MByte/sec
MTBF
5,966,000H
NAND Flash memory life span
50,000 cycles
Power voltage
3.3VDC±5%
Power
consumption
Idle
0.11mA (Typ.)
Read / Write (Sequential) 41mA (Typ.) / 51mA (Typ.)
Operating temperature
-40 - 85°C
Relative humidity
0 - 90%RH (No condensation)
External dimension (mm)
24.0(W)x32.0(D)x2.1(H)
Weight
Approx. 2g
*1: Capacity when shipped. The actual capacity (after formatting) in the user environment
may be smaller than this value.
*2: An actual performance is different depending on the use conditions.
6. Physical Dimensions
7. About write endurance
This product has a write endurance which limits the number of cycles each memory may be
written, due to the characteristic of the memory that is used.
See below for estimated write endurances.
Endurance years according to write capacity erased per day.
2GB : 87 years
4GB : 43 years
8GB : 21 years
16GB : 10 years
32GB : 5 years
Above estimation is for reference only.
8. Pin position
SD Memory Card Interface
Pin Number
Signal name
Function
1
CD/DATA3
Card Detect / Data Line [Bit3]
2
CMD
Command / Response
3
VSS
GND
4
VCC
+3.3V
5
CLK
Clock
6
VSS
GND
7
DAT0
Data Line [Bit0]
8
DAT1
Data Line [Bit1]
9
DAT2
Data Line [Bit2]
CPS-SD-FUJ-01
XXXXXXXXXXXXX
S/N:
24
32
2.1
[mm]
/