2.5-inch 16GB SATA Solid State Drive
PC-SSD16GS-L User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing the CONTEC PC-SSD16GS-L. This product is a solid state drive in accordance with 2.5-inch
SATA standard. Please use this product in accordance with the procedures described in this document. This product can
be used for the CONTEC’s following models. (Don’t use this product with any other devices.)
- PC-SSD16GS-L
Digital Signage Player: DS-960D-DCxxxx
Product Configuration
- Product …1 - Warranty Certificate …1
- User’s Guide (this booklet) …1 - Serial number label …1
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and municipal
ordinances.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in injury or death
and the destruction of equipment and resources. Understand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in
property damage.
Disclaimer
CONTEC disclaims any and all liability for consequential, special, or other indirect damages caused by the use of
CONTEC products. CONTEC does not provide any guarantee for the integrity of data on SSD.
Handling Precautions
W
RNING
- Do not modify the product. Doing so may cause fire, electric shock.
- If smoke or abnormal odor is detected, immediately turn off the PC and peripheral devices and unplug the power
cables.
- Never touch this product with wet hands. Doing so can short-circuit the product to cause fire, electric shock, and/or
failure.
CAUTION
- No part of this document may be copied or reproduced in any form by any means without prior written consent of
CONTEC CO., LTD.
- The contents of this document may be changed in the future without prior notice.
- All relevant issues have been considered in the preparation of this document. Should you notice an omission or any
questionable item in this document, please feel free to notify CONTEC CO., LTD.
- PC-SSD16GS-L is limited in the number of cycles they can be written (rewritten) to due to the nature of its memory
used. Note that the write life depends on the actual operating conditions.
- Do not turn off the power during disk access (writing). Doing so may break the data.
- This product is not formatted. Please be sure to format before use.
About write endurance
PC-SSD16GS-L has a write endurance which limits the number of times each memory may be written, due to the
characteristic of the memory that is used. Write endurance can be calculated by the following formula as a reference value:
Write endurance (cycles) =
Total capacity (MB) x 100,000 (cycles) / Size of file (MB)
Example1: When the file of 10MB is made for PC-SSD16GS-L, and it rewrites it once a second.
Write endurance = 16384MB x 100,000 cycles / 10MB = 163,840,000 (cycles)
Longevity = 163,840,000 / (3600 x 24 x 365)
≅
5.1 (year)
Note that it is only referential value, not guaranteed value.
Hardware Specifications
Item Specifications
Memory capacity 16GB
Host interface
Serial ATA standard Rev.2.0 (Gen2: 3.0Gbps),
Serial ATA standard Rev.1.0 (Gen1: 1.5Gbps)
Read *1 240MByte/sec
Write *1 190MByte/sec
MTTF 2,000,000 h
NAND Flash memory life span 100,000 cycles
Data retention 10 years
Rated voltage 5VDC ± 5%
idle 1.9W (Max.)
Consumed power
Read / Write 2.5W (Max.)
Operation -40 - 85 ºC
Surrounding
temperature
Storage -55 - 95 ºC
Corrosive gases None
Vibration (Operation) 20GRMS, 80-2000Hz
Shock (Operation) 1500G, 0.5ms, half-sine
Physical dimensions (mm) 69.9(W) x 100.1(D) x 9.35(H)
*1: An actual performance is different depending on use conditions.
External Dimensions
Connector Pin Assignment
Connector SATA connector
Pin No. Signal Pin No. Signal
PC1 N.C. S1 GND
PC2 N.C. S2 TX+
PC3 N.C. S3 TX-
PC4 GND S4 GND
PC5 GND S5 RX-
PC6 GND S6 RX+
PC7 +5V S7 GND
PC8 +5V
PC9 +5V
PC10 GND
PC11 RESERVED
PC12 GND
PC13 N.C.
PC14 N.C.
PC15 N.C.
Copyright 2012 CONTEC CO., LTD. All Rights Reserved.
CONTEC CO.,LTD.
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
August 2012 Editio
NA02148 (LYPK571
Japanese http://www.contec.co.jp/ English http://www.contec.com/
Chinese http://www.contec.com.cn/
[08282012]
No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD.