Kichler Lighting 45972NI User manual

45972NI
Brand
Kichler Lighting
Model
45972NI
Type
User manual

This manual is also suitable for

Kichler Lighting 45972NI is a versatile fixture compatible with various bulb types, including clear, brown, gold, or black bulbs with or without a tracer. It also accommodates insulated copper or silver conductor wires. This fixture can be mounted with the glass facing up or down, allowing for customized lighting effects. Installation requires connecting the fixture to the power supply and securing it to the wall with the provided screws. Please refer to the instruction manual for detailed safety precautions and step-by-step installation instructions.

Kichler Lighting 45972NI is a versatile fixture compatible with various bulb types, including clear, brown, gold, or black bulbs with or without a tracer. It also accommodates insulated copper or silver conductor wires. This fixture can be mounted with the glass facing up or down, allowing for customized lighting effects. Installation requires connecting the fixture to the power supply and securing it to the wall with the provided screws. Please refer to the instruction manual for detailed safety precautions and step-by-step installation instructions.

IS-45971-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Aach mounng strap[A] to outlet box[B] using the two (2) strap
mounng screws[C]. The mounng strap can be adjusted to suit
posion of xture.
2) Grounding instrucons: (See Illus. I or II).
a) On xtures where mounng strap is provided with a hole and
two raised dimples. Wrap ground wire from outlet box around
green ground screw, and thread into hole.
b) On xtures where a cupped washer is provided. Aach ground
wire from outlet box under cupped washer and green ground
screw, and thread into mounng strap.
If xture is provided with ground wire. Connect xture ground wire
to outlet box ground wire with wire connector (not provided.) aer
following the above steps. Never connect ground wire to black or
white power supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
I
II
Fixture Diagram
Parts List
[A] Mounting Strap
[B] Outlet Box
[C] Strap Mounting
Screws
[D] Mounting
Screws
[E] Canopy
[F] Socket Ring
[G] Glass
Installaon Instrucons
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
Warning:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
B
E
G
A
C
D
F
3) Make wire connecons. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other than
green) with copper conductor
Insulated wire (other than
green) with silver conductor
*Note: When parallel wire (SPT 1 & SPT
2) are used. The neutral wire is square
shaped or ridged and the other wire
will be round in shape or smooth
(see illus.)
Neutral Wire
4) Push xture to wall. Be sure not to pinch wires between wall and
canopy of xture. Note: xture can be mounted with the glass in the
up or down posion.
5) Screw in two (2) mounng screws[D]: one on top of canopy[E] and
the other into the boom of canopy.
6) Carefully raise glass to the xture. Slip the smaller opening over the
socket and t the glass[G] against the socket cover.
7) Thread socket ring[F] onto socket. Tighten socket ring to secure glass
in place. (DO NOT over ghten.)
8) Repeat for remaining sockets (if necessary).
9) Insert recommended bulb(s). (Not supplied)
Installaon Instrucons (connued)
IS-45971-CB
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)
INSTRUCTIONS:
For Assembling and Installing Fixtures in Canada
Pour L’assemblage et L’installaon Au Canada
1) Fixez la courroie de montage [A] à la boîte de sore [B] à l’aide des
deux (2) vis de xaon de la courroie [C]. La sangle de montage peut
être ajustée en foncon de la posion du luminaire.
2) Connecter les ls. Se reporter au tableau ci-dessous pour faire les
connexions.
Connecter le l noir ou
rouge de la boite
Connecter le l blanc de la
boîte
A Noir A Blanc
*Au cordon parallèle (rond et
lisse)
*Au cordon parallèle (à angles
droits el strié)
Au transparent, doré, marron,
ou noir sans l disncf
Au transparent, doré, marron,
ou noir avec un l disncf
Fil isolé (sauf l vert) avec
conducteur en cuivre
Fil isolé (sauf l vert) avec
conducteur en argent
*Remarque: Avec emploi d’un l
paralléle (SPT 1 et SPT 22). Le l neutre
est á angles droits ou strié et l’autre l
doit étre rond ou lisse (Voir le schéma).
Fil Neutre
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installaon.
ATTENTION:
Ce luminaire doit être installé conformément aux codes
d’électricité naonaux (NEC) et sasfaire toutes les
spécicaons des codes locaux. Si vous ne connaissez pas
les exigences de ces codes, il est recommandé de coner
l’installaon à un électricien ceré.
Diagramme d’appareils
Liste des Pièces
Instrucons d’installaon
Précauons
[A] L’étrier de
Montage
[B] Boîte à Prises
[C] Vis De Support
De Sangle
[D] Vis De Montage
[E] Canopée
[F] Douille
[G] Verre
B
E
G
A
C
D
F
3) Pousser le luminaire vers le mur. Ne pas pincer les ls entre le mur et
le cache du luminaire. Remarque: le luminaire peut être monté
avec le verre en position haute ou basse.
4) Vissez dans deux (2) vis de xaon[D]: une au dessus de la
canopée[E] et l’autre au bas de la canopée.
5) Élever soigneusement le verre[G] à l’appareil. Glissez l’ouverture
plus pete sur la douille et ajustez le verre contre la prise.
6) Ener la douille[F] sur la prise. Serrer les anneaux de prise pour xer
le verre en place. (Ne pas trop serrer.)
7) Répétez l’opéraon pour les prises restantes (si nécessaire).
8) Installer la ou les ampoules recommandées (non fournies).
Instrucons d’installaon (a connué)
  • Page 1 1
  • Page 2 2

Kichler Lighting 45972NI User manual

45972NI
Brand
Kichler Lighting
Model
45972NI
Type
User manual
This manual is also suitable for

Kichler Lighting 45972NI is a versatile fixture compatible with various bulb types, including clear, brown, gold, or black bulbs with or without a tracer. It also accommodates insulated copper or silver conductor wires. This fixture can be mounted with the glass facing up or down, allowing for customized lighting effects. Installation requires connecting the fixture to the power supply and securing it to the wall with the provided screws. Please refer to the instruction manual for detailed safety precautions and step-by-step installation instructions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents