SkyLink AT-200C User manual

Type
User manual
If you encounter an “Operation Timeout” Error when programming sensors or the ATOMS™ garage door
openers to the HU-100 hub, the issue may be with radio frequency interference from the wireless
router. It is recommended that you do not place the hub on top or beside the wireless router. Using a
longer cable separate the hub from the wireless router 3’ to 4’ away to avoid interference.
  • Page 1 1

SkyLink AT-200C User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI