INSTEON Mini Remote (Wireless Switch) Quick start guide

Type
Quick start guide
INSTEON Wireless Switch
Quick Start Guide
INSTEON Wireless Switch
Charging Port
(Micro USB)
On
O
Status LED
Set Button
On/O Switch
Sent On
On
Sent O
O
Charging
Fully charge your Wireless Switch before
use. Your Wireless Switch battery lasts 9-12
months between charges with average use.
Charging Port
(Micro USB)
Micro USB Cable
Set Button
Charging
Mounting
You can place your Wireless Switch
in-line with existing switches using the
Wall Mount Kit (Sold Separately).
Do not mount Wireless Switch over an
open junction box.
NEW
X
X
Linking
1
Tap the top of the switch and then
press and hold the set button until the
Wireless Switch beeps.
2
Make sure the device you wish to
control is ON and then press and hold
its set button until it double-beeps.
3
Your Wireless Switch will now control
your INSTEON device.
®
Rev 08.06.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
Portégé par des brevets américains et étrangers (consultez www.insteon.com/patents)
©2014 INSTEON
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support.
MANUAL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

INSTEON Mini Remote (Wireless Switch) Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI