Gigabyte 6VXD7 User manual

Category
Motherboards
Type
User manual

This manual is also suitable for

FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name: ERIC LU
Signature:
Date: Jul. 20, 2000
Eric Lu
GA-6VXD7
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-6VXD7
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature
:
Rex Lin
(Stamp)
Date : Jul. 20, 2000 Name : Rex Lin
6VXD7
Dual Socket 370 Server/Workstation
Motherboard
USER'S MANUAL
Dual Socket 370 Server/Workstation Motherboard
REV. 1.0 Second Edition
R-10-02-000724
How This Manual Is Organized
This manual is divided into the following sections:
1) Revision History Manual revision information
2) Item Checklist Product item list
3) Features Product information & specification
4) Hardware Setup Instructions on setting up the motherboard
5) Performance & Block Diagram Product performance & block diagram
6) Dual BIOS Dual BIOS
7) Four Speaker & SPDIF Four Speaker & SPDIF introduction
8) BIOS Setup Instructions on setting up the BIOS
software
9) Appendix
General reference
Table Of Content
Revision History P.1
Item Checklist P.2
Summary of Features P.3
6VXD7 Motherboard Layout P.5
Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition P.6
Performance List P.26
Block Diagram P.28
Dual BIOS Introduction (Optional) P.29
Four Speaker & SPDIF Introduction (Optional) P.36
Memory Installation P.41
Page Index for BIOS Setup P.42
Appendix P.71
6VXD7 Motherboard
1
Revision History
Revision
Revision Note Date
1.0 Initial release of the 6VXD7 motherboard users manual. Jul.2000
1.0 Second release of the 6VXD7 motherboard users manual.
Jul.2000
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained herein.
Third-party brands and names are the property of their respective owners.
Jul. 24, 2000 Taipei, Taiwan, R.O.C
Item Checklist
2
Item Checklist
þThe 6VXD7 motherboard
þCable for IDE / floppy device
þDiskettes or CD (TUCD) for motherboard driver & utility
oInternal COM B Cable (Optional)
oInternal USB Cable (Optional)
oCable for SCSI device
þ6VXD7 users manual
6VXD7 Motherboard
3
Summary Of Features
Form Factor Ÿ 30.5 cm x 24.4 cm ATX size form factor, 6 layers PCB.
CPU Ÿ 2 Socket 370 processor
Intel Pentium
!!! 100/133MHz FSB, FC-PGA
Ÿ 2
nd
cache in CPU (Depend on CPU)
Chipset Ÿ VT82C694X (VIA Apollo Pro 133A)
Ÿ VT82C686A
Clock Generator
Ÿ ICS 9248AF-63
Ÿ 100/133 MHz system bus speeds (PCI 33MHz)
Ÿ 112/124/142/152 MHz system bus speeds
(PCI >33MHz) (reserved)
Memory Ÿ 4 168-pin DIMM sockets
Ÿ Supports PC-100 / PC-133 SDRAM and VCM
SDRAM
Ÿ Supports up to 2GB DRAM (Max)
Ÿ Supports only 3.3V SDRAM DIMM
Ÿ Supports 72bit ECC type DRAM integrity mode
I/O Control Ÿ VT82C686A
Slots Ÿ 1 AGP slot supports 2X/4X mode & AGP 2.0
compliant
Ÿ 5 PCI slot supports 33MHz & PCI 2.2 compliant
Ÿ 1 16-bit ISA Bus slots (Optional)
On-Board IDE Ÿ Supports PIO mode 3, 4, UDMA33/ATA66 IDE &
ATAPI CD-ROM
Ÿ 2 IDE bus master (UDMA 33/ ATA 66) IDE ports for up
to 4 ATAPI devices
Hardware Monitor Ÿ CPU1 / CPU2 Fan revolution detect
Ÿ CPU1 / CPU2 temperature detect
Ÿ System voltage detect
Ÿ CPU overheat shutdown detect
On-Board
Peripherals
Ÿ 1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88M bytes
Ÿ 1 parallel ports supports SPP/EPP/ECP mode
Ÿ 2 serial ports (COM 1 & COM 2)
Ÿ 4 USB ports
Ÿ 1 IrDA connector for Fast IrDA
To be continued
Summary of Features
4
PS/2 Connector
Ÿ PS/2
Keyboard interface and PS/2
Mouse interface
BIOS Ÿ Licensed AMI BIOS, 2M bit flash ROM
Ÿ Support Dual BIOS (Optional)
On-Board Sound Ÿ Creative CT5880 sound (Optional)
Ÿ AC97 CODEC
Ÿ Line In / Line Out / Mic In / AUX In / CD In / TEL /
Game Port /Four Speaker & SPDIF (Optional)
Additional Features Ÿ Support Wake-On-LAN (WOL)
Ÿ Support Internal / External Modem Ring On
Ÿ Includes 4 fan power connectors
Ÿ Poly fuse for keyboard over-current protection
6VXD7 Motherboard
5
6VXD7 Motherboard Layout
PCI2
PCI3
VT82C686A
PS/2
SW2
PCI4
PCI5
ISA
SW1
AGP
J16
6VXD7
PCI1
BAT1
PGA 370
CPU 2
J15
USB1
ATX Power
Main
BIOS
J8
J7
J5
VT82C694X
AD1881
PGA 370
CPU 1
JP9
J13
JP1
J14
USB2
J1
J3
JP22
J4
Backup
BIOS
JP20
J2
6VXD7 Motherboard Layout
6
$
Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition
Page
CPU Speed Setup P.7
Connectors P.13
Game & Audio Port P.13
COM 1 / COM 2 / LPT Port P.13
USB1 Connector P.14
PS/2 Keyboard & PS/2 Mouse Connector P.14
J13 (CPU1 Fan) P.15
J15 (CPU2 Fan) P.15
J16 (Power Fan) P.16
J14 (Panel Fan) P.16
ATX Power P.17
Floppy Port P.17
IDE 1(Primary) / IDE 2(Secondary) Port P.18
J7 (TEL) P.18
J5 (AUX_IN) P.19
J8 (CD Audio Line In) P.19
J3 (Ring Power On) P.20
J1 (Wake On LAN) P.20
J4 (IR) P.21
USB 2 Connector P.21
Panel and Jumper Definition P.22
J2 (2x11 Pins Jumper) P.22
JP1 (Clear CMOS Function) P.23
JP22 (BIOS Flash ROM Write Protect) [Optional] P.23
JP20 (Onboard Sound Function) [Optional] P.24
JP9 (USB Device Wake Up Selection) P.24
BAT1 (Battery) P.25
6VXD7 Motherboard
7
CPU Speed Setup
The system bus speed is selectable at 100,133MHz. The user can select the system bus speed
(SW1 & JP25) and change the DIP switch (SW2) selection to set up the CPU speed for 500
1GHz + processor.
Set System Bus Speed
SW1/JP25: O : ON, X : OFF
1 2 3 4 JP25
CPU
(MHz)
PCI
(MHz)
X X X X 2-3 100 33
O X X X 1-2 112 37
O O X X 1-2 124 41
O O O X 2-3 133 33
X O O X N/C 142 35
O X O X N/C 152 38
The CPU speed must match with the frequency ratio. It will cause system hanging up if
the frequency ratio is higher than that of CPU.
SW2:
DIP SWITCH
FREQ. RATIO
1 2 3 4
X 3 O X O O
X 3.5 X X O O
X 4 O O X O
X 4.5 X O X O
X 5 O X X O
X 5.5 X X X O
X 6 O O O X
X 6.5 X O O X
X 7 O X O X
X 7.5 X X O X
X 8 O O X X
CPU Speed Setup
8
X 8.5 X O X X
X 9 O X X X
X 9.5 X X X X
M
The same CPU must be used in CPU socket1 and 2. (The same stepping, FSB, ratio)
«
Note: We dont recommend you to set up your system speed to 112, 124, 142, 152 MHz
because these frequencies are not the standard specifications for CPU, Chipset
and most of the peripherals. Whether your system can run under 112, 124, 142,
152 MHz properly will depend on your hardware configurations: CPU, SDRAM,
Cards, etc.
1. Pentium
!!! 500/100MHz FSB
1
JP25
SW2
ON
SW1
ON
1
Force 100MHz
JP25
6VXD7 Motherboard
9
2. Pentium
!!! 550/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
3. Pentium
!!! 600/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
4. Pentium
!!! 650/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
5. Pentium
!!! 700/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
CPU Speed Setup
10
6. Pentium
!!! 750/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
7. Pentium
!!! 800/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
8. Pentium
!!! 850/100MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 100MHz
9. Pentium
!!! 533/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
6VXD7 Motherboard
11
10. Pentium
!!! 600/133 MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
11. Pentium
!!! 667/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
12. Pentium
!!! 733/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
13. Pentium
!!! 800/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
CPU Speed Setup
12
14. Pentium
!!! 866/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
15. Pentium
!!! 933/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
16. Pentium
!!! 1GHz/133MHz FSB
SW2
ON
SW1
ON
1 2 3 4
1
JP25
1
JP25
Force 133MHz
6VXD7 Motherboard
13
Connectors
Game & Audio Port
Line Out 1: Line Out or SPDIF (The SPDIF output
is capable of providing digital audio to external
speakers or compressed AC3 data to an external
Dolby digital decoder). In general, Line Out 1 is
normally Line Out, when it output digital signal, it
will be change to SPDIF Out automatically (see
page 38 for more information).
Line In: In general, Line In is normally Line In.
When you select Four Speakerin Creative
application(see page 36 for more information),
Line In will be change to Line Out 2, then you can
plug 2 pairs stereo speaker into Line Out 1 and
Line In simultaneously.
MIC In
Game
Port
Line In/Line Out 2
Line Out 1
COM 1 / COM 2 / LPT Port
COM 1
LPT Port
COM 2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85

Gigabyte 6VXD7 User manual

Category
Motherboards
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI