Please call Sentry Security Systems Inc. at 1.866.736.8796 for Technical Support
Once the Internet Explorer page has loaded, you might have to login to access the camera.
The default log-in is username: admin, pw: admin. Click Submit
. You will now see the internal settings
of the IP Camera.
4. On the left hand side of the menu in the IP Camera Setup, select Network Set
and then LAN to set the
required IP address and default
gateway.
5. Click Save
to save the settings.
*If you wish to set-up more IP cameras,
repeat steps 1 through 5.*
Once the RP-IP camera network configuration is complete you can return to the system software to
change the IP Address and basic settings, rather than accessing it through Internet Explorer.
1. Click the Menu
button on the Software, then from the pop-up menu click on Add/Del IP Camera.
2. Double click on the camera you would like to modify - listed under Server Name.
A window will now
pop up, allowing you to modify the IP Camera.