Powering your Laptop
The (a) Slim Laptop Power Adapter can be operated from any standard wall outlet
using the included (b) AC power cord. Plug the (b) AC power cord into the (2) AC
connection port on the (a) Slim Laptop Power Adapter. Then, plug the metal prongs
of the (b) AC power cord into an AC wall outlet. The (1) Power LED will glow green
to indicate power ow.
Finally, connect the (3) Barrel pin connector into your laptop to begin charging.
Power will immediately be delivered to your laptop. Generally speaking, if your
unit is not powered on, the laptop battery will still be receiving a charge.
PLEASE NOTE: It is normal for power supplies to be warm during use.
Avoid placing near heat sources, direct sunlight, or heat-sensitive materials.
Operating Instructions:
The AC power adapter is hot. Is this normal?
- Yes, it is normal for power adapters to become warm during use.
I am not getting any power to my computer from the AC power supply.
- Please make sure the AC power supply is plugged into a properly working AC
power outlet and securely connected to your computer. Also, make sure the
(1) Power LED is glowing. In some cases, the (1) Power LED may burn out from
extended use.
Troubleshooting