Artos T-IWALLW is intended for towel warming/drying, auxiliary heating, or as a decorative product. It features a 200W, 110V element and a 48” cord for electric use or 840 BTU heat output with ½” BSPT tappings for hydronic use. The average heat-up time is about thirty minutes and it's typically programmed to be on an hour before expected use and remain on for an hour afterward. Installation requires a single gang electrical box 41/4” to the right of the bottom bar and the unit should be securely mounted to the wall in a vertical position.
Artos T-IWALLW is intended for towel warming/drying, auxiliary heating, or as a decorative product. It features a 200W, 110V element and a 48” cord for electric use or 840 BTU heat output with ½” BSPT tappings for hydronic use. The average heat-up time is about thirty minutes and it's typically programmed to be on an hour before expected use and remain on for an hour afterward. Installation requires a single gang electrical box 41/4” to the right of the bottom bar and the unit should be securely mounted to the wall in a vertical position.
Artos T-IWALLW is intended for towel warming/drying, auxiliary heating, or as a decorative product. It features a 200W, 110V element and a 48” cord for electric use or 840 BTU heat output with ½” BSPT tappings for hydronic use. The average heat-up time is about thirty minutes and it's typically programmed to be on an hour before expected use and remain on for an hour afterward. Installation requires a single gang electrical box 41/4” to the right of the bottom bar and the unit should be securely mounted to the wall in a vertical position.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI