Whirlpool ARC 1782/IX REFRIGE Program Chart

Type
Program Chart

This manual is also suitable for

PRODUCT SHEET
GB
GB
RO
PL SK H RUS BG
CZ
Refrigerator Compartment
1.
Crisper
2.
Shelves / Shelf area
3.
Control panel
4.
Upper door tray
5.
Door trays
6.
Bottle rack
7.
Removable bottle restrainer (if present)
8.
Rating plate (at the side of crisper drawer)
9.
Light, positioned either below the control
panel or inside the appliance (depending on
model)
10.
Divider between Refrigerator
compartment and Cool Compartment, in
fixed position (if provided)
A
. Refrigerator Zone: coldest area
B
. Cool Compartment: least cold area
Notes
: The number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
4
5
7
6
9
2
10
3
8
1
A
B
63501004GB.fm Page 1 Thursday, March 2, 2006 3:30 AM
5019 635 01004
GB
RO
PL SK H RUS BG
CZ
Refrigerator compartment controls
(depending on the model)
A.
Thermostat knob.
B.
Green LED: indicates that the appliance is ON.
If the LED blinks, contact the After-sales
Service.
C.
Fast Cooling button; the function switches off
automatically after approximately 6 hours.
D.
Fast Cooling function activated.
E.
Thermostat knob setting indicator.
A.
Display indicating the set temperature. If the
display indicating the set temperature blinks,
contact the After-sales Service.
B.
ON/OFF button.
C.
Temperature selection button.
D.
Fast Cooling button. The function switches off
automatically after approximately 6 hours.
E.
Fast Cooling function activated.
F.
“Vacation” function activation button: for
prolonged disuse.
G.
“Vacation” function activation indicator.
The refrigerator can operate at ambient temperatures between +10°C and +38°C. Optimal performance is obtained
at temperatures between +16°C and +38°C.
Note
: The ambient air temperature, the frequency of door opening and the position of the appliance can affect the
internal temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
Removing the light bulb Replacing the bulb
1.
Unscrew the light bulb as shown in the figure.
1.
Loosen the screw and remove the lamp cover.
2.
When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).
3.
Refit the lamp cover and secure it with the screw.
63501004GB.fm Page 2 Thursday, March 2, 2006 3:30 AM
  • Page 1 1
  • Page 2 2

Whirlpool ARC 1782/IX REFRIGE Program Chart

Type
Program Chart
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI