Sytech SYPA500 Owner's manual

SY·PA500

AIR PURIFER

USER

MANUAL

1

Contents

1.

Important safety instructions 2

2.

Product overview 5

3.

Before first use 6

4.

Using the appliance 8

5.

Filter Replacement 10

6.

Storage 13

7.

Environment 13

8.

Troubleshooting 13

9.

Specifications 15

2

1. Important safety instructions

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of fire, electric

shock or injuries and damages. Please read all instructions

before use.

PLEASE READ AND SAVE THESE

IMPORTANT SAFETY INSTRUCTIONS

1.Check that the voltage indicated on the appliance

corresponds to the local power before you connect

the appliance.

2.This appliance can be used by children aged 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge, if they have been given supervision

or instruction concerning the use of the appliance in

a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children

unless they are older than 8 and supervised.

3.

Keep the appliance and its cord out of reach of children

less than 8 years.

4.

DO NOT block the air inlet and outlet.

5. DO NOT place the appliance directly below an air

conditioner to prevent condensation from dripping onto

the appliance.

6. DO NOT use this appliance when you have used indoor

smoke-type insect repellents or in places with oily

residues, burning incense, or chemical fumes.

7. If the filter is protected by a polybag when shipped,

remove it before use.

3

8. To avoid fire hazards, NEVER let the cord hang

over and edge of a table, counter, or touch hot

surfaces such as heaters, stoves or radiators.

9. To protect against electrical hazards, DO NOT

immerse the appliance in water or other liquids.

DO NOT use the appliance in wet surroundings or

in surroundings with high ambient temperatures,

such as the bathroom, toilet or kitchen, or in a

room with major temperature changes.

10. Close supervision is necessary when any appliance

is used by or near children, or disabled persons.

11. Always unplug the air purifier before moving or

cleaning the unit, opening the grill, changing the filter

and whenever the unit is not in use. To disconnect

the unit, make sure to pull from the plug and not the

cord.

12. NEVER drop or insert any objects into the openings of

the unit.

13. DO NOT operate any appliance with a damaged cord

or plug. If the motor fan fails to operate or the unit has

been dropped or damaged in any manner. Contact

Sytech technical service department for examination

and/or repair.

14. Use the appliance only for intended household use

as described in this manual. Any other use not

recommended by the manufacturer may cause fire,

electric shock, or injury to persons. The use of

attachments not recommended or sold by

manufacturer may cause hazards.

15. DO NOT use this product outdoors. THIS APPLIANCE

IS FOR HOUSEHOLD ONLY.

16. NEVER place the air purifier on a soft surface such as a

4

bed or sofa as this could cause the unit to tip over and

block the air inlet or outlet grills.

17. Keep the unit away from heated surfaces and open

flames.

18. DO NOT attempt to repair or adjust any electrical or

mechanical functions on this unit. Doing so will void

your warranty. The inside of the unit contains no user

serviceable parts. All servicing should be performed

by an authorised dealer.

19. DO NOT place any object on top of unit.

20. NEVER use detergents, gasoline, glass purifier,

furniture polish, paint thinner, or other household

solvents to clean any part of the appliance.

21. Always turn the appliance off before unplugging it.

22.This appliance should only be used in rooms with

temperatures between 5ºC and 45ºC

.

23. WARNING: To reduce the risk of fire or electric

shock, DO NOT use the appliance with external

power strips or external speed control device.

24. Only use the original Artico filter especially intended for

this appliance. Do not use any other filters.

Save these instructions for future use.

5

WELCOME

Congratulations on your purchase of the Artico Air purifier SY-PA500. In order

to fully benefit from this product, please follow the instructions in this user

manual very carefully. Store this user manual in a safe place for future

reference.

2. Product overview

1

2

3

4

5

1. Control panel

2. Handle

3. Lamp

4. Outlet cover

5. Body

6. Filter

7. Base cover

7

6

3. Before first use

The filter is protected by a polybag when shipped, remove it before

use.

Placing the filters

The Air purifier comes with the filter fitted inside. Simply unlock the base cover

and remove the filter which is packed in its polybag. Unpack the filter and place it

back into its place as described below:

1. Place the appliance upside down on a soft cloth to avoid scratching, to

open the base cover, you need to find an arrow point on the base cover

corresponding the LOCK position, rotate the base cover counterclockwise

from LOCK to OPEN position to release the lock

2. Remove the base cover and take out the filter.

3. Remove the packaging material from the filter.

Note: Make sure you insert the filter in the correct position.

7

4. Insert the filter back into the appliance.

5. Rotate the base cover clockwise from OPEN position to LOCK position,

you will hear a "click" sound, the base cover is now locked.

8

4. Using the appliance

4.1 About the control panel

Time Speed mode

Timer Filter On/Off Air Speed

Reset quality

& light

For the optimum purification performance, close doors and windows

1. Connect the plug in the wall socket

All lights will turn on once and a beep sound

will be heard. The lights will go off again.

2. Press the power button to switch on the appliance.

The power lights, AQ light and the Fan Speed 2 lights

(Medium level) will turn on.

3. Fan speed adjustment

The fan speed light indicates at which fan speed the appliance is operating. Press

Speed button to adjust fan speed level. There are three levels 1~ 3 which

refers to: 1. Low, 2. Medium, 3. High and Auto/Sleep mode).

In Auto mode, the fan speed will automatically adjust the speed according to the

AQ level as shown below:

AQ

Color

Blue

Green Orange Red

Speed

mode

Sleep 1(Low) 2(Medium) 3(High)

AQ level Very good

Good Unhealthy

Hazardous

9

4.

Sleep mode

Press the button to activate the sleep mode.

The Sleep indicator light and the fan speed light will turn on, while all

other indicator lights will turn off.

When you use the air purifier in sleep mode, it will operate very quietly.

Press any of the buttons to switch off the sleep mode except the Filter and

Timer buttons.

5.

Working status (Air quality light)

The air purifier integrates a sensor which measure the quality of the air. The

air quality light automatically goes on when the appliance is switched on.

After a few seconds, the air quality sensors will automatically display the

color of the LED light that corresponds to the ambient air quality. Below is

the chart to understand Air quality level.

AQ Color Blue Green Orange Red

AQ Level Very god Good Unhealthy Hazardous

Standby status (Night light mode):

1.

When In standby mode, press the button to turn on the amber light

mode.

2.

Press the button once more to decrease the light effect to half the

brightness.

3.

To turn off the light, press the button for the third time.

6.

Setting the timer

1. Press to turn On or Off the timer function and to cycle through the

different timer options (2, 4, 8 Hours).

2. The air purifier will automatically power off once the timer has elapsed.

Note: pressing the button or unplugging the air purifier will cancel the

timer

.

7.

Filter replacement indicator

When the filter indicator lights up, this means the filter needs to be checked.

The first option is to clean the filter. Take out the filter and clean it (do not wash).

Place the filter back in its compartment and check if the filter light is no longer on.

10

If not, you must replace the filter.

Note: The filters’ lifetime is based on the environment air quality and usage

time. Using the appliance in a humid environment will reduce the lifetime of the

HEPA13 filter.

For optimal purification performance, close the doors and windows.

8.

Memory recall function

The air purifier will automatically memorize the settings once the appliance

is turned off, including the fan speed. When the air purifier is switched on

again, it will return to its previous memory settings.

4.2 Cleaning the Air purifier

Regularly clean the inside and outside of the unit to prevent dust from

accumulating.

1. Wipe away dust with a soft dry cloth from the body of the appliance

2. Clean the air inlet and the air outlet with a soft dry cloth.

3. Remove dust and hair trapped inside the purifier with a vacuum cleaner.

5. Filter Replacement

5.1 When Should I Replace the Air Filter?

It is recommended to change the air ﬁlter every 6–8 months. However, you

may need to change your ﬁlter sooner or later depending on how often you

use your air puriﬁer. It is important to watch out for the following signs of

expired ﬁlter:

● Increased operating noise

● Decreased airﬂow

● Clogged ﬁlter

● Increased presence of odors

• Always unplug the appliance before cleaning it.

• Never immerse the appliance in water or any other liquid.

• Never use aggressive or flammable cleaning agents such as bleach

or alcohol.

• The HEPA13 filter is not washable.

11

Note:

● The environment in which the air puriﬁer is being used may also extend or

shorten the lifetime of the air ﬁlter. Using your air puriﬁer in an environment of

relatively high pollution may mean you will need to change the air ﬁlter more

often.

● If the air pollution in your environment is very high, there is a possibility that

the ﬁlters may not be completely effective and may need to be replaced

before lights up.

● Remember to reset the air puriﬁer after changing the air ﬁlter.

1. Switch off the appliance and unplug it. (a)

(a)

2. Place the appliance upside down

on a soft cloth to avoid scratching.

Rotate the cover base counter

clockwise from the LOCK position

To the OPEN position (b).

(b)

3. Remove the old filter. (c)

(c)

4. Remove the packaging material of the new filter. (d)

(d)

5. Insert the new filter back into its compartment. (e)

(e)

12

6. Rotate the base cover clockwise from OPEN position to LOCK position,

until you hear a "click" sound. Now

the base cover is blocked. (f)

(f)

7. Connect the plug into the wall socket and switch on the

appliance again. (g)

(g)

8. Reset Filter's lifetime.

If after replacing the new filter, the indicator lights up,

you should reset the filter life.

(h)

1. Plug in the air puriﬁer and turn it on.

2. Press and hold for 3 seconds. (h)

3. Release the button after 3 seconds and the light will turn off.

4. The reset is now complete.

5.2

Filter replacement force mode

When using the air puriﬁer in an environment of heavy pollution, the lifespan of

the air ﬁlter may signiﬁcantly reduce. You can change the ﬁlters even if does

not light up. Follow the steps below to perform a hard reset.

1. Replace the air ﬁlters as mentioned in the Filter Replacement section (5).

2. Plug in the air puriﬁer and let it be in standby mode.

3. Press and hold the button for 3 seconds. The indicator will light up.

4. Press and hold the button for 3 seconds again and the indicator will turn off.

The reset is now complete.

13

6. Storage

1. Turn off and unplug the air purifier from the electrical outlet.

2. Clean the air purifier and the filter surface (see the chapter on “Cleaning and

maintenance.)

3. Allow all parts to dry thoroughly before storing.

4. Put the filter in an airtight plastic bag.

5. Store the air purifier and filter in a cool, dry place

6. Always wash your hands thoroughly after handling the filters.

7. Environment

This symbol means that this product shall not be disposed with

normal household waste (2012/19/EU).

Follow your country’s rule for the separate collection of electrical

and electronic products. Correct disposal helps prevent negative

consequences for the environment and human health.

8. Troubleshooting

This chapter summaries the most common problems you could encounter with

the appliance. If you are unable to solve the problem with the information below,

contact Artico technical service center for a proper solution.

14

Problem

Possible

cause

Possible

solution

The appliance

doesn’t

work

The filter cover is not closed properly Remove the filter cover and

reinstall it.

Power plug is not connected to a

power supply.

Unplug and reconnect power.

The appliance is not turned on. Plug in the power and turn the air

purifier back on.

The airflow has

significantly

reduced

Filters packaging has not been

removed.

Filter’s plastic packaging

should be removed before

use.

The air quality is good and

therefore the automatic mode

has been activated.

In automatic mode, the

appliance will automatically

adjust the fan speed to save

maximum energy.

Sleep mode has started automatically,

the LED indicator turns off, while the

fan speed and noise level are also

reduced.

Press the fan speed button and

choose the desired fan speed.

The Pre-filter is too dirty. Please clean up the Pre-filter.

The filter has not been replaced.

Replace with a new filter.

Insufficient space and ventilation in

the surroundings.

Make sure there is at least 15

inches (38 cm) of free space in all

directions around the purifier.

The fan speed does

not change to

automatic mode.

The air quality sensor is humid, or

the ambient temperature is too high,

causing condensation on the

sensor.

Make sure the air quality sensor

is clean and dry.

Poor performance

The room area is too large.

Use the air purifier in a smaller

room.

The air inlet or outlet of the appliance

are blocked.

Clean the air inlet and outlet and

remove any obstructions.

Too noisy

Filter’s plastic packaging haven ’t been

removed.

The plastic packaging of the

filter must be removed before

use.

The air quality sensor is dirty.

Clean the air quality sensor.

15

9. Specifications

• Compact Air purifier with advanced triple filtration.

• True HEPA 13 filter.

• Active carbon filter.

• Pre filter.

• Ambient air quality indicator.

• Auto on function which activates the purifier process only when

necessary.

• Filter change reminder indicator light.

• Filtration efficiency: 99,97%.

• Apt for areas of 25-40m2.

• 3 power levels with auto function: Low, Medium, High.

• Touch panel with LED light to create a warm and calm atmosphere.

• Timer: 2, 4, 8 hours.

• Sleep function: 1, 2, 3 hours.

• CADR: 240m3/h.

• Power: 35W.

• Sound level: 30-52dB.

• Dimensions: diameter 190mm x height 436mm.

• Voltage: 220-240V – 50/60Hz.

www.sytech.es

The color of the air

quality indicator

always remains

Indoor air ventilation is poor. Open the window and improve air

ventilation.

After replacing the

filter, the filter

replacement

indicator light still

flashes.

The filter lifetime has not been reset

correctly.

Check the manual "Reset Filter's

lifetime".

Sytech SYPA500 Owner's manual

Related papers

Other documents