R82 Nandu Assembly Instruction

Type
Assembly Instruction

This manual is also suitable for

Mounting instruction (GB)
Nandu seat on High-low frame
03.2010
9996097850
A
E
B
C
D
Mounting instruction
Nandu seat on High-low frame
Mount the anti tilt restrictor on the High-low frame
before use. The restrictor can be found in the tool bag
which comes with the Nandu seat.
To mount the restrictor:
Click the anti tilt restrictor onto the gas spring as shown (A).
Ensure that the restrictor is fitted before mounting the seat.
To mount the seat:
Place the seat in the adapter (B) and push it all the way back,
until it "clicks" into place. Lock the red handle (C)
Do not use the first hole it „clicks” into. This is just the
"safety hole" which will "catch" the seat if the knob ac-
cidently should pop out of its right hole.
To dismount the seat:
Unlock the red handle (C). Pull out the knob (B), pull the seat
forward, and lift at the same time.
Angling the seat:
Angle the seat by lightly pressing down the handle (E) and
pushing against the seat back or the seat front for anterior tilt..
The seat has upto 10° anterior and posterior tilt.
  • Page 1 1
  • Page 2 2

R82 Nandu Assembly Instruction

Type
Assembly Instruction
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI