AmazonBasics PL100-50-WHT User manual

Type
User manual

This manual is also suitable for

1
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the
following:
a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor
use. When products are used in outdoor applications, connect the products to a Ground
Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician
for proper installation.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar
sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or
nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night or if left
unattended.
h) This is an electrical product-not a toy! To avoid risk of fire, burns, personal injury and
electric shock it should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire or light string.
k) Do not close door or windows on the product or extension cord as this may damage the
wire insulation.
l) Do not cover the product with cloth, paper or any material not part of the product when in
use.
m)This product has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless plug can be fully inserted. Do not
alter or replace plug.
n) Installing bulbs: Ensure that the base of the bulb is fully threaded into the socket by
rotating clockwise. The base of the bulb should be sealer securely to the top of the socket.
o) This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug
any additional strings or products that may be attached to the product. Replace the fuse
as per the user servicing instructions (follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a short-circuit may be present and the
product should be discarded.
p) Read and follow all instructions that are on the product or provided with the product.
q) SAVE THESE INSTRUCTIONS
2
Use and Care Instructions
a) When the product is placed on a live tree, the tree should be well maintained and fresh.
Do not place on live trees in which the needles are brown or break off easily. Keep the
tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any product that have cut,
damaged or frayed wire insulation or cords, cracks in the lamp holders or enclosures,
loose connections, or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed,
including trees, branches, or bushes, to avoid any undue strain or stress on the product
conductors, connections and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
IMPORTANT SAFETY INSTRUCTIONS
a) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
c) Unscrew old bulb by rotating counterclockwise and removing
from socket.
d) Installing bulbs: Ensure that the base of the bulb is fully
threaded into the socket by rotating clockwise. The base of
the bulb should be sealer securely to the top of the socket.
e) Replace bulb with only 120 Volt, 5 Watt G40 type bulb.
f) Check fuse and replace if necessary.
g) Risk of fire. Replace fuse only with 5 Amp, 125V fuse.
h) Close fuse cover. Slide closed the fuse access cover on
top of attachment plug.
i) Risk of fire. Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
j) Disconnect the lighting string or decorative outfit from the
outlet before removing a lamp and replacing it with the
ornament.
If connecting to a lighting string that does not have a Wattage (W) rating (found on the tag
within 6 inches of the plug) calculate the wattage as follows: Multiply the current (___A)
which is on the flag-type tag by 120.
For example: Lighting string is rated 120V, 60Hz, 0.2 Amps. 0.2 X 120 = 24 Watts.
Add the wattage of each light string together for a total of 420 Watts or less.
(Do not exceed 420 Watts)
User Servicing instructions
CAUTION
1. Replace only with the same type 5 Watt Max intermediate-base UL classified lamps.
2. To reduce the risk of fire do not deliberately reposition either lamp holder contact.
3. To reduce the risk of fire and electric shock: a) Do not install on trees having needles,
leave or branch coverings of metal or materials which look like metal. And b) Do not
mount or support strings in a manner that can cut or damage wire insulation.
Replacement Bulb
Specifications
Image
Type
Globe-G40
Incandescent
E12-Candelabra
5
120
Construction
Bulb Base
Wattage
Volts
G40 Bulbs
3
Model No. LA(P)C-O255
1 Year Limited Warranty
The Product is warranted against defects in materials and workmanship under normal use
and service for a period of one (1) year from the date of original purchase when delivered
to you in new condition in its original container. Warranty repair or replacement shall not
extend the original warranty period of the Product. A dated proof of purchase is required at
the time of warranty service. A copy of your dated bill of sale will satisfy this requirement.
This warranty does not cover accessories or consumables, such as light bulbs, as to which
there shall be no warranty or replacement.
This limited warranty covers all defects encountered in normal use of the Product and does
not apply to the following cases:
1. Loss of or damage to the Product due to abuse, neglect, mishandling, improper
packaging by you, alteration, accident, electrical current fluctuations, improper use,
failure to follow operating or maintenance instructions prescribed in AmazonBasics
safety instructions or other documentation. Dropping the Product, scratches, and
abrasions will be presumed to have resulted from misuse, abuse or failure to operate
the Product as set forth in the user’s manual or other documentation for the Product.
2. Use of other parts or supplies (other than those sold by AmazonBasics) that cause
damage to the Product
3. If the Product has had its model number or dating defaced, altered or removed.
4
SAVE THIS MANUAL. Keep this manual for assembly, operating, maintenance,
inspecting and cleaning purposes.
Patio String Lights, 25 FT, Installtion Guide
WARNING: Read ENTIRE manual before using this product. Failure to do so may
result is serious injury or harm.
While unpacking this product, make sure the item is complete and undamaged. Please
contact Amazon support if any parts appear to be missing or broken.
WARNING: This product can expose you to chemicals including lead, which is known
to the State of California to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
5
1. KEEP OUT OF REACH OF CHILDREN
2. For temporary (90 days max) installation and use only.
3. For indoor and outdoor use.
4. To reduce the likelihood of excessive heat and possible damage, use only decorative
lamp accessories packaged with this product.
5. This is a parallel-connected lighting string.
6. To reduce risk of electric shock, DO NOT connect or disconnect when wet.
7. DO NOT use with extension cord near water or where water may accumulate.
8. Keep lamps at least 16 feet (4.8m) from pools and spas
9. Keep plugs and receptacles dry; DO NOT submerse
10.Lighting strings are rated for 120V, 60 Hz; DO NOT EXCEED 432 total watts, all strings
combined. Do not connect more than three (3) 25-Foot strings together or exceed 75
total bulbs.
11.Female connector is to be used ONLY for additional light sets.
WARNINGS AND SAFETY INFORMATION
NOTICE:
The warnings and precautions included in this manual do not cover all
conceivable scenarios and outcomes. The operator must exercise caution and common
sense when installing and operating this product.
CAUTION:
1. DO NOT secure cords with staples or nails.
2. If changing to a new location, remove bulbs before installation.
3. INSPECT set up and product condition before each use.
4. Keep bulbs at least 3 inches from other objects.
INSTALLATION
(Hardware, hooks, cable ties and guiding wire are not included.)
1. Hang your String Lights in the desired location, ensure all bulbs are properly secured into
their sockets.
2. Plug String Light into power outlet.
1
2
6
1
NOTICE: When connecting multiple cords together, create a knot with the cord ends
as shown below or use a plug protec
tor to prevent the plugs from pulling apart
during use.
CARE INSTRUCTIONS:
Clean String Light only with a dry, soft cloth. Do NOT use abrasive cleaners.
TROUBLESHOOTING
INSTALLING/REPLACING LIGHT BULBS
Installing Bulbs:
Issue
Light did not
come on initially
or no longer
comes on.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord.
2. Unscrew old bulb by rotating counterclockwise and removing from socket.
3. Install new bulb. Ensure that the base of the bulb is fully threaded into the socket by
rotating clockwise. The base of the bulb should be sealed securely to the top of the socket.
1. Bulb is burnt out/damaged
2. Bulb is not properly installed
3. String Light fuse blown
4. String Light is not plugged in
1. Replace bulb
2. Reinstall bulb
3. Replace fuse
4. Plug String Light into outlet
Possible Source Resolution
WARNING: To prevent serious injury, unplug String Light from electrical outlet
before installing/replacing bulbs or fuses. Allow bulbs to cool down before touching.
2
1st String
Light Cord
2nd String
Light Cord
1
7
WARNING: Ensure that your replacement bulb fits securely into the bulb socket.
Incorrectly fitting bulbs will not seal socket properly and may cause injury or death from
shattered glass or electric shock.
Prior to purchase of replacement bulbs, please make sure to meet the below specifications.
G40 replacement bulbs may be purchased at local hardware stores or on Amazon.com.
1. These lighting strings are rated for 120V, 60 Hz; DO NOT EXCEED 432 total watts, all
strings combined. Do not connect more than three (3) 25-Foot strings together or
exceed 75 total bulbs.
2. This lighting string is rated 125 Watts (1.04 Amps), do not overload.
3. Connect other lighting strings or decorative outfits end-to-end up to a maximum of
432 Watts (3.6 Amps) total.
4. When connecting multiple sets, protect connections from direct exposure to rain and
water. DO NOT allow connection to become wet.
5. When joining 25FT and 50FT strings, either string can be connected directly to the outlet.
6. When joining 25FT and 25FT strings, do not exceed 432 total watts.
7. When joining 25FT and 50FT strings, do not exceed 432 total watts.
8. When joining 50FT and 50FT strings, do not exceed 840 total watts.
CAUTION: Replace lamp with only 120 Volt, 5 Watt G40 Incandescent type lamp.
CAUTION—For connecting multiple strings:
Replacing Bulbs:
Replacement Bulb
Specifications
Image
Type
Globe-G40
Incandescent
E12-Candelabra
5
120
Construction
Bulb Base
Wattage
Volts
G40 Bulbs
8
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord
2. Slide open panel fuse door on top side of male connector plug
3. Remove replacement fuse(B) using a flathead screwdriver
4. Replace fuse(A) with Fuse(B)
5. Close cover and discard of fuse(A)
CAUTION: Discard String Light if the connector plug is damaged.
INSTALLING/REPLACING FUSES:
OPEN
OUVRIR
3
(B)
(A)
OPEN
OUVRIR
2
Slide to
Open
(B)
(A)
4
(A)
(B)
5
OPEN
OUVRIR
Slide to
Close
(B)
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

AmazonBasics PL100-50-WHT User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI