Jumbl Stereo Bluetooth Receiver User manual
- Type
- User manual
Jumbl Stereo Bluetooth Receiver
The Jumbl Stereo Bluetooth Receiver allows you to enjoy your music wirelessly with any standard pair of wired 3.5mm headphones. It effortlessly pairs with most Bluetooth-capable mobile devices such as smartphones, mp3 players, PCs, and PDAs, and then seamlessly transmits high-quality stereo audio.
Features:
- Remote control of music playback1
- Playback auto-pause for incoming call
- Remote control of call answer, decline, and redial2
- Auto-resume of music playback after call end3
- Computer compatibility for Skype, MSN Messenger, Yahoo! Messenger, etc.4
Jumbl Stereo Bluetooth Receiver
The Jumbl Stereo Bluetooth Receiver allows you to enjoy your music wirelessly with any standard pair of wired 3.5mm headphones. It effortlessly pairs with most Bluetooth-capable mobile devices such as smartphones, mp3 players, PCs, and PDAs, and then seamlessly transmits high-quality stereo audio.
Features:
- Remote control of music playback1
- Playback auto-pause for incoming call
- Remote control of call answer, decline, and redial2
- Auto-resume of music playback after call end3
- Computer compatibility for Skype, MSN Messenger, Yahoo! Messenger, etc.4
Stereo
Bluetooth
Receiver
USER MANUAL
www.ItsJumbl.com
JUMBL is a trademark of C&A IP Holdings, LLC
©2013 All Rights Reserved
Distributed by C&A Marketing, Inc.
2 Bergen Turnpike, Ridgeeld Park,
NJ 07660
1-866-849-3049
Calling:
- Press Multi-Function Button to answer
incoming call.
- Press and hold Multi-Function Button for 2
seconds to reject incoming call.
Headset will output confirmation tone.
- Press Multi-Function Button to end active
call, or simply hang up on connected phone.
- Double-press Multi-Function Button to redial
last call. Headset will output confirmation tone.
Voice Dialing:
- With device in standby, Press and hold
Multi-Function Button for 2 seconds and then
release. A tone prompt for voice dialing
will sound.
Note: connected mobile phone must support
voice-dialing feature.
Disconnecting:
- Power off Stereo Bluetooth Receiver by
long-pressing the Multi-Function Button until
red LED flickers, or disable Bluetooth function
on your connected device.
G. Troubleshooting
No/Low Sound:
- Ensure headphones are properly connected to
Stereo Bluetooth Receiver
- Check for adequate battery charge level
- Increase volume level by pressing Volume+ Button
Distortion or White Noise:
- Move Stereo Bluetooth Receiver closer to
connected mobile device
- Look for interference e.g. brick walls, nearby
mobile devices
- Lower volume on Stereo Bluetooth Receiver
and/or on connected mobile device
- Check for adequate battery charge level
- Check integrity of music files on
connected device
- Power off both Stereo Bluetooth Receiver and
mobile device, then power back on and reconnect
Unable to Pair with Bluetooth Device:
- Ensure that your mobile device is
Bluetooth compatible
- Check for adequate battery charge level
- Power off both Stereo Bluetooth Receiver and
mobile device, then power back on and reconnect
H. FCC Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may cause
undesired operation.
Important: Changes or modification to this product
are not authorized and could void the FCC
compliance as well as negate your authority to
operate this product.
F. Technical Specifications
Carrier Frequency: 2.4-2.480Ghz
Bluetooth: v2.0
Battery: Built-in Li-Polymer
Charging Time: <3 Hours
Usage Time: Up to 9 Hours on Full Charge
Standby Time: 150 Hours
Wireless Range: 33 Feet
Supported Bluetooth Profiles:
- Headset
- Hands-Free
- Advanced Audio Distribution
- Audio Video Remote Control
A. Introduction
Thank you for purchasing our Stereo
Bluetooth Receiver, and welcome to the
Jumbl™ family. This user manual is meant
to offer you a brief walkthrough of the device’s
features and usage protocols. We hope you
find this manual helpful. For additional
information and technical support, please
feel encouraged to contact our help team by
phone: 1-866-849-3049
C. Box Contents
1 x Stereo Bluetooth Receiver
1 x Charging Cable
1 x User Manual
D. Parts & Controls
1. Noise-Cancelling Microphone
2. Charging Port
3. Volume + Button
4. Previous Button
5. Multi-Function Button
6. LED Indicator
7. Next Button
8. Volume - Button
9. 3.5mm Headphone Jack
E. Operation
Basics:
- To charge built-in battery, connect included
charging cable to Charging Port. Plug other
end into computer USB port, or connect to
AC adapter and plug into wall outlet.
Notes: It is recommended that device be
charged fully (2-3 hours) before first use.
When battery charge level is low, red LED
will flash continuously. Red LED indicator
will remain lit while charging. Once device is
fully charged, blue LED indicator will go ON.
Power and Volume:
- Power on by long-pressing the Multi-
Function Button until blue LED flickers
- Adjust output volume by pressing Volume+
and Volume- buttons
- Power off by long-pressing the Multi-
Function Button until red LED flickers
Note: The volume levels of your connected
device equally affect the possible volume
levels of the BikeBeacon. Ensure connected
device’s volume is adequately loud.
Bluetooth Pairing:
- With device powered off, press and hold
Multi-Function Button until red and blue
LED indicators flash. Device is now in
pairing mode.
- Turn on Bluetooth function on mobile
device you wish to connect.
- When “BSH380” appears on your mobile
device, select it and enter 0000 if prompted.
- Once pairing is complete, blue LED
will flash.
Music Playing:
- Any music you play on your paired device
will stream to the headphones connected to
the 3.5mm Headphone Jack
- Press Multi-Function Button to pause/
resume playback.
- Press Next and Previous buttons to scroll
between songs.
Notes: Your connected mobile device must
support this music player control feature. Pair
and connect your mobile device with Stereo
Bluetooth Receiver before using this feature.
Incoming calls will pause music automatically,
and speaker will stream incoming call tone.
Music will resume after call is done.
B. Features
Utilizing Bluetooth wireless technology, the
Jumbl™ Stereo Bluetooth Receiver provides
you with an easy, no-frills method of enjoying
your music with wireless convenience using
any standard pair ofwired 3.5mm headphones.
It effortlessly pairs with most Bluetooth-c
apable mobile devices such as smartphones,
mp3 players, PCs and PDAs, and then
seamlessly transmits high-quality stereo audio.
Additional features include:
• Remote control of music playback
1
• Playback auto-pause for incoming call
• Remote control of call answer, decline
and redial
2
• Auto-resume of music playback after
call end
3
• Computer compatibility for Skype, MSN
Messenger, Yahoo! Messenger, etc.
4
1
Mobile device must support Bluetooth AVRCP (Audio
Video Remote Control Profile)
2
Mobile device must support Bluetooth HSP (Headset
Profile) or HFP (Hands-free Profile)
as well as Bluetooth A2DP (Advanced Audio
Distribution Profile)
3
While most mobile devices support this function, some
may not. Check with your device manufacturer
4
Computer or its plug-in Bluetooth adapter must support
Bluetooth HSP (Headset Profile)
-
1
-
2
Jumbl Stereo Bluetooth Receiver User manual
- Type
- User manual
Jumbl Stereo Bluetooth Receiver
The Jumbl Stereo Bluetooth Receiver allows you to enjoy your music wirelessly with any standard pair of wired 3.5mm headphones. It effortlessly pairs with most Bluetooth-capable mobile devices such as smartphones, mp3 players, PCs, and PDAs, and then seamlessly transmits high-quality stereo audio.
Features:
- Remote control of music playback1
- Playback auto-pause for incoming call
- Remote control of call answer, decline, and redial2
- Auto-resume of music playback after call end3
- Computer compatibility for Skype, MSN Messenger, Yahoo! Messenger, etc.4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
