Page is loading ...
Antenna ins
tallation
Using manual x 1
Option1:Outdoor (Installation of antenna base and pole)
Option2:Indoor
AN-1021
AN-5008
Using Manual
Package contents AN-5008
Product information
HDTV Antenna x1
Base x1
Clamp x1
U-bolt x1
Screw x1
Antenna and base mounting (The antenna is mounted vertically and horizontally in the same way)
Base
Bolt
Pole
Clamp
Nut
Base
Antenna
The two screw holes must be aligned when
the antenna is installed on the base.
Antenna screw hole
Base screw hole
Screw
Double sided sponge sticker
x2
Please place the antenna as HIGH as
possible indoor or outdoor to receive
more channels!!!
DO NOT put antenna at low position
Important Notice
(1)
(3)
Connect the USB charging port DC 5V
Charging port
set top box
Connect the USB charging port DC 5V
Connect F or IEC connectors to AN/IN ports of set top box or HDTV.
Power the antenna by plugging the USB connector into a charging port on the
HDTV or set top box or into a wall outlet with one power adapter(no included).
If the receiving effect is not good, you can adjust the position and direction of
the antenna .
1.Reception quality and the numbers of channels received are dependent on multiple factors like distance from TV
broadcast tower, broadcast power, line of sight, terrain, metal construction materials and other environmental factors.
2.Visit NoCable.org,DtVGovMaps.com,dtv.gov/maps,TVFool.or other official tv signal website to see a list of channels that
may be available in your area.
Charging port
How to connect the antenna to TV ?
Remark:
Made in china
IP
X4
lightning protection
uvioresistant
Cold-resistant
Check to see if your geographical location exceeds signal coverage.
Important notice : Please place the antenna as HIGH as possible indoor or outdoor
to receive more channels!!! (DO NOT put it at low position).
/