Bon-Aire i3000 User guide

Brand
Bon-Aire
Model
i3000
Type
User guide

Bon-Aire i3000 is a 12-volt air inflator designed for inflating car and bike tires, ATVs, sports equipment, and other inflatables. It features an easy-to-use on/off switch and a built-in pressure gauge for accurate inflation. The i3000 comes with a variety of nozzles for inflating different types of items, including a ball adaptor and a mattress adaptor. It also has a built-in LED light for illuminating the work area in low-light conditions. With its compact size and lightweight design, the i3000 is easy to store and transport, making it a convenient tool for on-the-go inflation needs.

Bon-Aire i3000 is a 12-volt air inflator designed for inflating car and bike tires, ATVs, sports equipment, and other inflatables. It features an easy-to-use on/off switch and a built-in pressure gauge for accurate inflation. The i3000 comes with a variety of nozzles for inflating different types of items, including a ball adaptor and a mattress adaptor. It also has a built-in LED light for illuminating the work area in low-light conditions. With its compact size and lightweight design, the i3000 is easy to store and transport, making it a convenient tool for on-the-go inflation needs.

Owners Manual
INFLATOR 3000
12 Volt Air Inflator
PART #: i3000
This Manual contains information regarding the safety and operation of
this product. Before you use, read and understand all instructions,
cautions, and warnings. Failure to do so can result in serious injury or
property damage.
Table of Contents
Page No.
General Safety Rules ................................................. 3
Safety Symbols, Words and Labels ........................... 3
Specifications ............................................................. 4
Important Safety Information ...................................... 4
Operating Instructions ................................................ 5
Warranty information .................................................. 5
2
Manufactured for Goodyear by:
873 E. Citation Court
Boise, Idaho 83716 USA
800-874-5771
ba@bon-aireindustries.com
GOODYEAR (and winged foot design) is a trademark of The Goodyear Tire & Rubber Company, Akron,
Ohio USA used under license by Bon-Aire Industries,
SPECIFICATIONS
THIS INFLATOR OPERATES ONLY ON 12 VOLT DC OR THE INTERNAL
BATTERY. DO NOT ATTEMPT TO OPERATE THIS INFLATOR WITH ANY
OTHER SOURCE OR VOLTAGE. DO NOT REWIRE OR RECONFIGURE
INFLATOR FROM ITS ORIGINAL DESIGN OR PERSONAL INJURY OR
BODILY HARM MAY OCCUR.
Voltage 12 V
Power Requirement DC 12V/12A – For use with 12 Volt
DC Power Outlet Only
Note: This unit is equipped with fuse protection. If at some point your Inflator
fails to operate, check the fuse in the end of the 12 volt plug. To replace the fuse,
simply unscrew the 12 Volt power plug tip, install new fuse and reassemble power
plug tip. Use only an AGC - 15 amp replacement fuse.
IMPORTANT SAFETY INFORMATION
WARNING
1. Use 12 volt DC only. Make sure that your vehicle 12 Volt power outlet is free
of any ash residue or debris. A dirty 12 Volt power outlet can cause the
inflator and power cord to overheat. Overheating can cause damage to your
inflator/vehicle and could cause bodily harm or injury (Disconnect power
when not in use).
2. This inflator is designed to inflate car tires, bike tires, ATV tires, sports
equipment, air mattresses, beach toys and other inflatables. Do not use for
any purpose other than inflating. If you do so, bodily harm or personal injury
can occur.
3. When operating your inflator do not run more than 10 minutes continuous
use. Allow inflator to cool down 10 minutes before re-using.
4. After using, turn off power.
5. The inflator is not a toy. Keep away from children at all times.
6. Do not carry inflator by the air hose or power cord or damage may occur.
7. Do not leave the inflator unattended while in operation.
8. Do not over inflate. Please follow the manufacturer’s instructions for the item
you are inflating
9. Keep the inflator away from flammable areas/liquids at all times.
10. Do not operate the inflator in wet or damp areas.
11. Operate the inflator only with the accessories that are included.
12. USE SAFETY GLASSES. Also use face or dust mask if operation is dusty.
4
OPERATING INSTRUCTIONS
To inflate vehicle tire:
1. Connect the 12 volt plug into 12 Volt Power outlet.
2. Connect the Valve/Tire chuck to tire air valve and push down the Valve Lock
Lever to secure the connection.
3. Slide the On/Off switch to “On” position and the Inflator will begin to operate.
Inflate your tire or desired item to the correct pressure and shut off the
Inflator by sliding the On/Off switch to the "Off" position.
To inflate sports ball, air mattress, rubber raft, etc.:
You may use the adapter nozzles to inflate sports balls, air mattresses, rubber rafts
and other inflatable items. Select appropriate nozzle and follow procedure for
inflating vehicle tire (above).
CAUTION
DO NOT OVER-INFLATE YOUR ITEM
INTENDED USE
This product is intended for consumer use only.
5
Item # Name
1 12 V Power Outlet Plug
2 12 V Power Cord
3 Valve/Tire Chuck
4 On/Off Power Switch
5 Ball Adaptor
6 Mattress Adaptor
6
GENERAL SAFETY RULES
WARNING
Read and understand all instructions. Failure to follow instructions can result in
electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
SAFETY SYMBOLS, WORDS AND LABELS
The safety instructions provided in this manual are not intended to cover all possible
conditions that may occur during product operation. Always use common sense and
pay attention to all WARNING and CAUTION statements in this manual.
WARNING
WARNING indicates a potentially hazardous
situation. Failure to avoid may result in serious
injury or death.
CAUTION
CAUTION indicates a potentially hazardous
situation. Failure to avoid may result in minor
personal injury.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Bon-Aire i3000 User guide

Brand
Bon-Aire
Model
i3000
Type
User guide

Bon-Aire i3000 is a 12-volt air inflator designed for inflating car and bike tires, ATVs, sports equipment, and other inflatables. It features an easy-to-use on/off switch and a built-in pressure gauge for accurate inflation. The i3000 comes with a variety of nozzles for inflating different types of items, including a ball adaptor and a mattress adaptor. It also has a built-in LED light for illuminating the work area in low-light conditions. With its compact size and lightweight design, the i3000 is easy to store and transport, making it a convenient tool for on-the-go inflation needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents