2. Channel Vision
  3. 3110

Channel Vision 3110 User manual

  • Hello! I am an AI chatbot trained to assist you with the Channel Vision 3110 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3110 Tilt Compensator
Channel Vison’s 3110 Tilt Compensator is used to balance the signal strengths accross all
frequencies. In cable systems, Coax Cable will attenuate higher frequencies more than it will
lower frequencies (see diagram below), causing an imbalance in frequency strengths as it moves
through the spectrum (channel ranges). The 3110 will compensate for this, and provide a true
and uniform strength accross frequencies (see diagram below).
Description:
© 1998, Channel Vision™
Before 3110 Tilt Compensator After 3110 Tilt Compensator
2dB
4dB
6dB
8dB
10dB
12dB
14dB
16dB
18dB
20dB
100 200 400 500 600 700 800300 900
dB
MHz
dB
2dB
4dB
6dB
8dB
10dB
12dB
14dB
16dB
18dB
20dB
100 200 400 500 600 700 800300 900
MHz
Instructions:
Place the 3110 Tilt in line at the head end of the system or on any branch run over 250’.
Cable or
Antenna
3110 Tilt
HS-3
234 FISCHER AVENUE l COSTA MESA, CA 92626
(714) 424-6500 l (800) 840-0288 l (714) 424-6510 FAX
/