Channel Vision 3110 User manual

3110 Tilt Compensator

Channel Vison’s 3110 Tilt Compensator is used to balance the signal strengths accross all

frequencies. In cable systems, Coax Cable will attenuate higher frequencies more than it will

lower frequencies (see diagram below), causing an imbalance in frequency strengths as it moves

through the spectrum (channel ranges). The 3110 will compensate for this, and provide a true

and uniform strength accross frequencies (see diagram below).

Description:

Before 3110 Tilt Compensator After 3110 Tilt Compensator

2dB

4dB

6dB

8dB

10dB

12dB

14dB

16dB

18dB

20dB

100 200 400 500 600 700 800300 900

MHz

2dB

4dB

6dB

8dB

10dB

12dB

14dB

16dB

18dB

20dB

100 200 400 500 600 700 800300 900

MHz

Instructions:

Place the 3110 Tilt in line at the head end of the system or on any branch run over 250’.

Cable or

Antenna

3110 Tilt

HS-3

234 FISCHER AVENUE l COSTA MESA, CA 92626

(714) 424-6500 l (800) 840-0288 l (714) 424-6510 FAX