Storage capacity and comfort come together in the
new incorporation to the Nox series. With Nox Blaze
adapter you can adapt two 2.5 SSD drives in a 5.25
internal bay in a simple and fast way, without wires or
screws.
Also, if you are someone who does not come off of
the screen Nox Blaze Swap adapter will becomes a
perfect colleague cause thanks to HotSwap
technology it offers the possibility of removing or
inserting the drives without shutting down your
computer.
SPECS:
- Install on a standard bay 5.25 "
- Two adapters for external hard drives 2.5 "
- Power supply via a Molex connector
- Two LED status lights
- External USB 3.0 Connector
1) Place the 2,5” HDD into HDD tray.
2) Slide the tray into enclosure.
3) Slide the enclosure into 5,25” PC
chassis bay.
4) Connect the adapter to the PC using
the Molex and the USB 3.0. connectors.
INSTALLATION
GUIDE
/
