Edelbrock 15013 User manual

  • Hello! I am an AI chatbot trained to assist you with the Edelbrock 15013 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Catalog #15013
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0393
Fig. 1
Towards Exhaust
Elbow
Towards Turbine
Outlet
1.75”
KIT CONTENTS:
Qty. Description
5 Stud, 8mm x 1.25 x 1.75” long
5 Nut, 8mm x 1.25
5 Washer, 8mm
INSTALLATION:
1. Hand tighten the 1.75” long studs into the turbine outlet,
with the longer threads towards the turbine outlet
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
TURBOCHARGER TURBINE OUTLET STUD KIT
For Turbine Outlet to Outlet Elbow
Catalog #15013
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
Catalog #15013
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0393
Fig. 1
Towards Exhaust
Elbow
Towards Turbine
Outlet
1.75”
KIT CONTENTS:
Qty. Description
5 Stud, 8mm x 1.25 x 1.75” long
5 Nut, 8mm x 1.25
5 Washer, 8mm
INSTALLATION:
1. Hand tighten the 1.75” long studs into the turbine outlet,
with the longer threads towards the turbine outlet
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
TURBOCHARGER TURBINE OUTLET STUD KIT
For Turbine Outlet to Outlet Elbow
Catalog #15013
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
/