T & S Brass & Bronze Works MPZ-2DCN-08 Datasheet

Type
Datasheet
8"
[203mm]
10 7/16"
[265mm]
10 5/16"
[262mm]
32mm] Minimum)
Note: Rough-In Requirement
1 1/2" [ 38mm] Hole
( 1 1/4" [
Mounting
Surface
Sheet:
1
of
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
REG. #A2601
ISO #9001
08/26/09
DHL
Travelers Rest, SC: 800-476-4103
Simi Valley, CA: 800-423-0150
Fax: 864-834-3518
Date:
NTS
Spray Valve, 6" Wall Bracket & Club Handles
www.tsbrass.com
JHB
JRM
Approved
Drawn Checked
Easy Install Pre-Rinse Unit:
2 Saddleback Cove / P.O. Box 1088
8" Swing Nozzle, Compact Spring & Flex Hose, B-0107
Single Deck Mount Base Mixing Faucet, Add-On Faucet,
MPZ-2DCN-08
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
2
EPAct2005 Compliant
For Commercial Use Only
For Clarity
Nozzle w/
Regulator
& Spray Valve Not Shown
Overhead Spring, Hose
B-PT Stream
Spring Check &
Club Handles
Eterna Cartridges w/
060X
8" Swing
18" Long Flexible
Stainless Steel
Supply Hoses
6" Wall
Bracket
1 1/8"[29mm] Thick or
004R
1 1/4"[32mm] Thick
By Removing Washer
Clarity
Inner Hose & Handle
Eterna Cartridge &
Club Handle
B-0107
B-0109-01
Fits Decks up to
Hose w/ Polyurethane
24" Stainless Steel
B-0024-H
Flow Rate
w/ 1.42 GPM
Spray Valve
x 8" Riser
3/8" NPT
000364-40
Hook
Finger
Not Shown For
Swing Nozzle
Compression Fittings
for 5/8" Copper Tubing
(Remove Compression
Nut for 1/2" NPSM Male)
6 7/8"
[175mm]
[622mm]
24 1/2"
8 7/8"
[225mm]
ITEM
NO.
SALES NO. DESCRIPTION
1 B-0107 1.42 GPM Spray Valve
2 010476-45 #27 Washer
3 000907-45 Hold Down Ring
4 002987-40 Grip Handle Assembly
5 001014-45 Washer, B-0100 Hose Barrel
6 B-0024-H2A 24" Flex Hose Less Handle
7 016795-45 Compact Pre-Rinse Spring
8 000821-40 Spring Body
9 B-0109-01 Bracket Assembly, 6" Wall
10 004R Finger Hook
11 000364-40 3/8" x 8" Riser
12 009304-41 Cap Insert, Cold
13 009331-41 Decorative Handle Asm-Cold
14 012442-40
Cold Eterna Spindle Assembly
w/ Spring Check
15 012443-40
Hot Eterna Spindle Assembly
w/ Spring Check
16 007947-40 Quarter Turn Eterna
17 009332-41 Decorative Handle Asm-Hot
18 009303-41 Cap Insert, Hot
19 009285-41 Cap Insert Blank
20 001066-45 O-Ring
21 000922-45 Screw, Lever
22 017181-41 Decorative Handle Asm-Blank
23 B-PT Stream Regulator Outlet
24 001038-45 Nozzle Tip Washer
25 060X 060X Swing Nozzle Asm
26 000965-45 Lock Nut
27 012534-45 Flexible Connector Hose
28 007365-45 Lock Washer
2
of
2
Sheet:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
Travelers Rest, SC: 800-476-4103
Fax: 864-834-3518
REG. #A2601
ISO #9001
MPZ-2DCN-08
Simi Valley, CA: 800-423-0150
2 Saddleback Cove / P.O. Box 1088
Approved
Drawn
www.tsbrass.com
JHB
JRM
Checked
NTS
Date:
Spray Valve, 6" Wall Bracket & Club Handles
DHL
08/26/09
Scale:
Product Specifications:
Easy Install Pre-Rinse Unit:
Single Deck Mount Base Mixing Faucet, Add-On Faucet,
8" Swing Nozzle, Compact Spring & Flex Hose, B-0107
20
28
26
27
24
9
10
11
15
14
16
1
25
23
2
3
4
5
7
2
8
12
18
13
17
19
21
6
22
  • Page 1 1
  • Page 2 2

T & S Brass & Bronze Works MPZ-2DCN-08 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI