Delta R4700-FLWS Dimensions Guide

R4700-FLWS
Delta
Brand
Delta
Model
R4700-FLWS
Type
Dimensions Guide

The Delta R4700-FLWS is a floor-mounted tub filler with a single hole design. It features 1/2" NPT female inlets, a forged brass body, and an innovative mounting system for simple and stable installation. It can accommodate finished floor thickness up to 3 inches and has pre-assembled test caps for air or water pressure testing. Additionally, it comes with a pre-assembled protective plaster guard, a pre-assembled gasket to isolate living space, and a lifetime limited warranty on parts and finishes.

The Delta R4700-FLWS is a floor-mounted tub filler with a single hole design. It features 1/2" NPT female inlets, a forged brass body, and an innovative mounting system for simple and stable installation. It can accommodate finished floor thickness up to 3 inches and has pre-assembled test caps for air or water pressure testing. Additionally, it comes with a pre-assembled protective plaster guard, a pre-assembled gasket to isolate living space, and a lifetime limited warranty on parts and finishes.

COMPLIES WITH:
•
ASME A112.18.1 / CSA B125.1
■ R4700-FLWS (With Stops)
Submitted Model No.: _________________________________________________
Specific Features: ____________________________________________________
STANDARD SPECIFICATIONS:
• 1/2" NPT female inlets.
• Forged brass body.
• Available with integrated stops (R4700-FLWS).
• Innovative mounting system provides for simple
stable installation.
• Accommodates finished floor thickness up to 3".
• Pre-assembled test caps allow air or water
pressure testing without trim.
• Pre-assembled protective plasterguard with
information label indicating finished floor location.
• Pre-assembled gasket to isolate living space.
• Trim sold separately.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
PROTECTIVE COVER
DO NOT REMOVE!!
TRIM FLUSH TO FINISHED
FLOOR TO INSTALL TRIM
DO NOT SAW!!
INTERNAL COMPONENTS
CAN BE DAMAGED
FINISHED FLOOR MAX
FINISHED FLOOR MIN
3"
(76 mm)
73812 Rev. C
R4700-FLWS
SINGLE HOLE
FREESTANDING
FLOOR
MOUNTED TUB
FILLER R0UGH-IN
R4700-FLWS
DSP-B-R4700-FLWS Rev. C
WARRANTY
•
Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes:
or, for commercial users, for 5 years from
date of purchase.
•
5 year limited warranty on electronic parts
(other than batteries); or, for commercial
users, for 1 year from the date of purchase.
No warranty is provided on batteries.
8"
(203 mm)
2 1/2"
(64 mm)
3 3/8"
(86 mm)
3/4"
(19 mm)
Min Deck
Thickness
1 1/2"
(38 mm)
3 13/16
(97 mm)
6 1/2"
(165 mm)
3" (76 mm)
Max. Finished
Floor Thickness
55 E 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2015 Masco Corporation of Indiana
  • Page 1 1

Delta R4700-FLWS Dimensions Guide

R4700-FLWS
Delta
Brand
Delta
Model
R4700-FLWS
Type
Dimensions Guide

The Delta R4700-FLWS is a floor-mounted tub filler with a single hole design. It features 1/2" NPT female inlets, a forged brass body, and an innovative mounting system for simple and stable installation. It can accommodate finished floor thickness up to 3 inches and has pre-assembled test caps for air or water pressure testing. Additionally, it comes with a pre-assembled protective plaster guard, a pre-assembled gasket to isolate living space, and a lifetime limited warranty on parts and finishes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents