LG LSP-R1001P Owner's manual

Brand: LG

Model: LSP-R1001P

Type: Owner's manual

This manual is also suitable for

Introduction

The LSP-R1000/LSP-R1001 is a combined wireless colour

camera & video monitor (receiver). The high-resolution colour video

camera includes a built-in motion detector and microphone, an ideal

combination for watching a baby, monitoring a porch, pet, yard or

pool. It is also suited to many small business applications.

Features

• 2.4 GHz wireless technology.

• 2.5-inch LCD display for good picture quality.

• Plug and play installation.

• LCD display operates in 3 modes: Power save, Auto and Manual.

• Adjustable cycle time between cameras in Auto mode.

• The Brightness, Colour, Contrast, Alarm volume and Audio vol-

ume can be adjusted.

• PIR sensor function.

Package Contents

Your package contains the following:

Part Name and Functions

LCD Monitor Overview

[1] LCD monitor screen.

Displays live images from the selected wireless camera.

[2] Channel indicator.

Lights green or red when the channel is selected.

Blinks when the motion is detected.

[3] Mode select buttons.

- P/S: Select when you require the system to enter P/S mode.

- AUTO: Select when you require the system to enter auto

mode.

- MANUAL: Select when you require the system to enter

manual mode.

[4] Speaker.

To listen to the sound output from the wireless camera.

[5] Power button.

To turn the LCD monitor On or Off.

[6] Speaker volume adjustment buttons.

Adjust the speaker volume level by using the volume

buttons.

[7] Alarm volume adjustment control.

Adjust the alarm volume on the LCD monitor by rotating the

alarm volume control.

[8] MENU button.

To select the Brightness, Colour or Contrast setting mode.

[9] p/q buttons.

Adjusts the level of the Brightness, Colour or Contrast.

[10] Audio/Video output jack.

Allows connection of another display and/or sound device

using the AV cable supplied.

[11] 9V DC Power input jack.

[12] Battery cover case.

The LCD monitor can be operated without the power

supply adapter using four AA type batteries or battery pack

(Supplied with LSP-R1001 only).

Camera Overview

[1] Camera lens.

[2] IR(Infra Red) lamp sensor.

[3] Motion sensor.

[4] Microphone.

The microphone is incorporated into the camera.

[5] Infra Red lamp.

[6] Battery cover case.

The camera can be operated without the power

supply adapter using four AA type batteries or battery pack

(Supplied with LSP-R1001 only).

[7] 9V DC Power input jack.

Installing the wireless camera

Installing your camera is a simple process. It can be placed on any

horizontal surface.

1. Locate the camera on a horizontal surface.

2. Plug the power supply into the camera and the mains outlet.

3. Make adjustments to the camera viewing angle by tilting and

panning the camera head with your hand.

4. Press the POWER button to turn the camera on.

Note:

Ensure the power adapter cord is long enough to reach your mount-

ing location.

Operating the Wireless Camera System

Mode operation

• P/S (Power Save) mode:

Press the P/S button on the LCD monitor, the system will enter

the P/S mode. The LCD monitor screen will go blank and enter

standby mode while the system continuously scans the active

camera(s). If a camera detects motion, the LCD monitor will

display the camera picture and a beep will sound. Two minutes

after the last motion is detected, the screen returns to standby

mode while the LCD monitor resumes scanning.

Press the MANUAL or AUTO button to cancel this mode.

• AUTO mode:

Press the AUTO button on the LCD monitor, the system will

enter the auto mode. The system automatically rotates through

all cameras. When a camera detects motion, the LCD monitor

will display the picture from the camera for a few seconds and a

beep will sound. To avoid searching channels which do not have

cameras/transmitters assigned, set the dip switches for those

corresponding channels to the off position.

The dwell time (Time taken to switch between cameras) is pre-

set to 4 seconds and can be adjusted from 2 to 30 seconds. To

adjust the dwell time, press both the AUTO and MANUAL but-

tons simultaneously.

Each flash of the LED increases the dwell time by one second.

This function will be activated when more than one camera is

used.

• MANUAL mode:

Press the MANUAL button on the LCD monitor to select a spe-

cific camera. The LCD monitor will switch to a different camera

each time the MANUAL button is pressed. When a camera

detects motion, the LCD monitor will display the picture from

the camera for a few seconds, and a beep will sound. To avoid

searching channels which do not have cameras assigned, set

the dip switches for those corresponding channels to the OFF

position.

Menu Operation

• Brightness adjustment

1. Press the MENU button on the LCD Monitor repeatedly until

the LED in the button turns red indicating selection of the

brightness adjustment mode.

2. Adjust brightness level using the p/q buttons.

• Blue colour adjustment

1. Press the MENU button on the LCD Monitor repeatedly until

the LED in the button quickly flashes red indicating selection

of the blue colour adjustment mode.

2. Adjust the blue colour level using the p/q buttons.

• Red colour adjustment

1. Press the MENU button on the LCD Monitor repeatedly until

the LED in the button slowly flashes red Indicating selection

of the red colour adjustment mode.

2. Adjust the red colour level using the p/q buttons.

• Contrast adjustment

1. Press the MENU button on the LCD Monitor repeatedly until

the LED in the button turns off indicating selection of the

contrast adjustment mode.

2. Adjust the contrast level using the p/q buttons.

Note:

On pressing the MENU button, the LED changes as shown below.

Turns red a Turns red on slow flicker a Turns red on fast flicker a

Turns off a Turns red.

Motion-Sensing Cameras

The camera is equipped with a PIR motion sensor. When the cam-

era detects motion, a red light flashes on the camera and an alert

sounds on the LCD monitor.

Before Installation

• The camera must not face into direct sunlight or any bright light;

as this may cause damage to the camera.

• Avoid viewing areas where half of the area is in bright light and

the other half is in darkness. All types of cameras have difficulty

viewing wide variations in light levels.

• The communication range of this device is up to 100 feet (30 m)

from the Wireless System Controller in a typical home, depend-

ing on the number of obstacles. These can include metal fram-

ing, thick walls, and other wireless devices operating at 2.4 GHz.

It is recommended that different positions are tried.

• The 2.4 GHz video signals pass easily through home interior

walls, but the signal may be reflected by power cables or plumb-

ing inside the wall. The most common source of interference is

microwave ovens. Try to avoid mounting the LCD monitor near

a microwave oven or other source of RF interference such as a

wireless phone.

Installing the LCD Monitor

Installing your LCD Monitor is a simple process. You can either hang

the LCD Monitor from the ceiling or place on a level surface.

1. Locate the LCD Monitor on a horizontal surface.

2. Plug the power supply into the LCD Monitor and a mains

outlet.

3. Turn the LCD Monitor on.

The LCD Monitor system will be activated and enters auto mode

automatically.

Note:

Ensure the power adapter cord is long enough to reach your mount-

ing location. z

[1]

[2]

[5]

[3]

[7]

[6]

[4]

Wireless LCD

Monitor.

9V DC

Power Adapter (2EA).

AA type rechargeable

battery pack for wireless

LCD Monitor. (Supply

with LSP-R1001 only)

- Recharging Time :

Approx. 25 hours.

- Using Time :

Approx. 2 hours 30

minutes.

AAA type recharge-

able battery pack for

wireless camera.

(Supply with

LSP-R1001 only)

- Recharging Time :

Approx. 16 hours.

- Using Time :

Approx. 3 hours 30

minutes.

AV Cable.

Wireless Motion

Sensor Camera.

[1]

[2]

[3]

[6]

[8]

[9]

[7]

[10]

[4] [5]

[11]

[12]

Specifications

Wireless Camera

Item Description

Rated Voltage 9 V DC

Rated Current

400 mA

Frequency Range 2.4~2.48 GHz

Frequency 2.41, 2.44, 2.47 GHz

Modulation Method FM

Oscillation Method PLL

Image Sensor 1/3'' CMOS IC

Integrated Lens 5.6mm, F1.8 Fixed Focus

TV System NTSC/PAL (Colour) Standard

Auto Electronic Exposure

1/60~1/15000 sec.

Min Illumination 0.5 Lux

Resolution 360 Horizontal TV lines

Signal/Noise Ratio 48dB

Overall Size 82mm (W) x 120mm (H) x 65mm (D)

Weight 182g (Without Batteries)

Operating Temperature 0°C to +45°C

Operating Humidity Less than 85%

Transmitting and

Receiving distance

25-30m (with obstacle)

50-70m (without obstacle)

Antenna

Item Description

Frequency Range 2.4~2.48 GHz

Polarization Monopole

SWR 2 : 1

Gain

2 dB

Impedance 50 Ohm

Outline Size ø3.5 x 85mm (Transmitter)

Multi-camera Operation

We recommend the use of only one camera with the LCD moni-

tor. If more than one camera is to be used, the Dip-switch must be

set for each camera and the LCD monitor. The LCD monitor system

is designed to work with up to three cameras. Additional cameras

must be purchased separately.

• Dip-switch position on the LCD monitor

The dip-switch can be found inside the battery compartment as

shown below.

• Dip-switch position of Wireless Camera

The dip-switch can be found inside the battery compartment as

shown below.

Battery installation guide

The Wireless camera system can be used without the supplied

adapter.

• LSP-R1000 : Remove the battery compartment cover on the

camera and LCD monitor, and insert four AA size batteries

ensuring the (+) and (-) are aligned correctly as shown below.

• LSP-R1001 : Connect the cable of the rechargeable battery

pack to the terminal of the camera and the LCD monitor as

shown below.

- Rear of the LCD monitor.

- Rear of the camera.

Notes:

• Do not mix old and new batteries and never mix different types

of batteries such as standard, alkaline, rechargeable etc.

• Charging the battery whenthe battery is not completely drained

can reduce the battery capacity. The battery must be fully

charged only when it is completely drained.

• You must use the supplied adapter to recharge the battery.

Using another adapter may caused damage to the rechargeable

battery.

• The rechargeable battery is a consumable item.

ab a

7

@

< LSP-R1000 > < LSP-R1001 >

Notes:

• If more than one camera is used interference may occur

between wireless devices. If this is the case, the problem

can be solved by changing the channel of the camera or chang-

ing the frequency band of the wireless devices.

• The wireless home viewer system uses a 2.4GHz frequency

band. If this unit is used in close proximity to a microwave oven

or a wireless device such as a wireless home theatre system,

wireless LAN, wireless telephone etc. interference may occur.

Do not use the wireless home viewer system near any other

wireless devices.

Trouble shooting

If any problems occur refer to the following guide before contacting

a service engineer.

Symptom Correction

Abnormal

or no picture

• Check all connections.

• Ensure the plug on the power cord is securely

inserted into the mains outlet.

• Ensure the camera(s) and LCD monitor are

switched on.

• Ensure the rechargeable battery is fully

charged.

• Ensure the batteries are correctly inserted with

(+) and (-) aligned correctly.

Interference on

Camera picture

• Ensure each camera is within the range, and

no large obstructions are blocking the signal.

• Try repositioning the camera, the monitor or

both to improve reception quality.

• Reposition other equipment which is in close

proximity and may be transmitting at 2.4GHz

frequency.

Audio problems

• Ensure the volume is set at a sufficiently high

level on the monitor.

• Ensure the microphone is within range of the

sound source.

• If the unit emits a loud wailing sound (feed-

back), try moving the camera away from the

monitor or angle the monitor differently.

LCD Monitor

Item Description

Rated Voltage 9 V DC

Rated Current 800 mA

Frequency Range 2.4~2.48 GHz

Frequency 2.41, 2.44, 2.47 GHz

Intermediate Frequency 480MHz

Radio Waves Type Analog

Display Mode TMR

Display Size (Diagonal) 2.5 inch (LSP-R1000)

Number of Dots(HxV) 882x228 Dot

Dot Pitch (H x V) 0.056 x 0.168 mm

Colour Number Full Colour/16 Million

Brightness

250cd/m

Contrast Rate 200:1

Light Source Type LED

TV System NTSC/PAL (Colour) Standard

Colour Configuration R.G.B Strip

Overall Size 87mm (W) x 150mm (H) x 65mm (D)

Weight

260g (Without Batteries)

Operating Temperature 0°C to +45°C

Operating Humidity Less than 85%

Transmitting and

Receiving distance

25-30m (with obstacle)

50-70m (without obstacle)

This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous volt-

age within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

FCC WARNING : This equipment may generate or use radio frequency energy.

Changes or modifications to this equipment may cause harmful interference unless

the modifications are expressly approved in the instruction manual. The user could

lose the authority to operate this equipment if an unauthorized change or modifica-

tion is made.

Regulatory Notices For U.S.A

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radi-

ate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Do not install this equipment in a confined space such as a bookcase or

similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code,

ANSI/NFPA 70.

Warning: To reduce a risk of fire or electric shock, do not expose this product to

rain or moisture.

Caution: This installation should be made by a qualified service person and

should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to

qualified personnel only.

Caution: The apparatus should not be exposed to water (dripping or splashing)

and no objects filled with liquids, such as vases, should be placed on the

apparatus.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately

from the municipal waste stream via designated collection facilities

appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop

where you purchased the product.

Important Safety Instructions

LG WIRELESS HOME VIEWER

Instruction Manual

Models: LSP-R1000

LSP-R1001

Before installing, operating or adjusting this prod-

uct, please read this instruction booklet carefully

and completely.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

1. Read these instructions.

- All these safety and operat-

ing instructions should be read

before the product is operated.

2. Keep these instructions. -

The safety, operating and use

instructions should be retained

for future reference.

3. Heed all warnings. - All warn-

ings on the product and in the

operating instructions should be

adhered to.

4. Follow all instructions. - All

operating and use instructions

should be followed.

5. Do not use this apparatus

near water. - For example: near

a bath tub, wash bowl, kitchen

sink, laundry tub, in a wet base-

ment; near a swimming pool;

etc.

6. Clean only with dry cloth.

- Unplug this product from the

wall outlet before cleaning. Do

not use liquid cleaners.

7. Do not block any ventilation

openings. Install in accor-

dance with the manufacturer’s

instructions. - Slots and open-

ings in the cabinet are provided

for ventilation, to ensure reliable

operation of the product, and

to protect it from over- heating.

The openings should never be

blocked by placing the product

on a bed, sofa, rug or other simi-

lar surface. This product should

not be placed in a built-in instal-

lation such as a bookcase or

rack unless proper ventilation is

provided and the manufacturer’s

instructions have been adhered

to.

8. Do not install near any heat

sources such as radiators,

heat registers, stoves, or

other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety

purpose of the polarized or

grounding-type plug. A polar-

ized plug has two blades with

one wider than the other. A

grounding type plug has two

blades and a third grounding

prong. The wide blade or the

third prong are provided for

your safety. If the provided

plug does not fit into your out-

let, consult an electrician for

replacement of the obsolete

outlet.

10. Protect the power cord from

being walked on or pinched

particularly at plugs, conve-

nience receptacles, and the

point where they exit from the

apparatus.

11. Only use attachments/acces-

sories specified by the manu-

facturer.

12. Use only the cart,

stand, tripod,

bracket, or table

specified by the

manufacturer, or

sold with appara-

tus. When a cart

is used, use caution when

moving the cart/ apparatus

combination to avoid injury

from tip-over.

13. Unplug this apparatus dur-

ing lightning storms or when

unused for long periods of

time.

14. Refer all servicing to qualified

service personnel. Servicing

is required when the appara-

tus has been damaged in any

way, such as power- supply

cord or plug is damaged,

liquid has been spilled or

objects have fallen into the

apparatus, the apparatus has

been exposed to rain or mois-

ture, does not operate nor-

mally, or has been dropped.

P/NO: MFL30580144 (English)

7

@

< LSP-R1000 > < LSP-R1001 >

Set the viewer to Channel 1.

(Default setting)

Set the viewer to Channel 2.

Set the viewer to Channel 3.

Set the camera as channel 1

(2.41GHz) (Default setting).

Set the camera as channel 2

(2.44GHz).

Set the camera as channel 3

(2.47GHz).

LG LSP-R1001P Owner's manual

Brand: LG

Model: LSP-R1001P

Type: Owner's manual

This manual is also suitable for

Download PDF

report

LG LSP-R1001P Owner's manual

This manual is also suitable for

LG LSP-R1001P Owner's manual

Related papers

Other documents