Hewlett Packard Enterprise 670632-S21 User manual

Brand: Hewlett Packard Enterprise

Model: 670632-S21

Category: Servers

Type: User manual

This manual is also suitable for

470065-821

Performance driven compute with storage density - ideal for enterprise applications. Industry leading performance, efficiency, capacity

and reliability. Enterprise enhanced design for all workloads with versatility for future requirements. A space conscious 2-processor

server with industry leading feature sets. Built to protect your investment and extend the life with reliability, accessibility and

serviceability features designed in.

Front View:

Rear View:

Hood Cover

PCIe 3.0 Full-height/half length x16 expansion slot

Up to two Intel® E5-2600v2 or E5-2600 Series processors

FlexibleLOM ports (Shown: 4 ports 1Gb each /Optional: 2

ports 10Gb each)

Optical Disk Drive Bay

Video connector

Active Health and Network Status LEDs

Serial connector

2 USB Connectors

PCIe 3.0 Low Profile x8 expansion slot

Video connector (requires Front Video Adapter Kit)

iLO Management Engine NIC connector

Slide-out System Insight Display (SID)

Unit ID LED/button

Hard Drive Bays

4 USB connectors

Removable hot-plug fan modules for easy serviceability

Power supply bay 2 (Shown populated: Optional Power

Supply for Redundant Power)

10.

24 DIMM slots: DDR3 Registered (RDIMM), Load Reduced

(LRDIMM) or Unbuffered (UDIMM) memory

10.

Power supply bay 1 (Primary Power Supply)

11.

Redundant Hot Plug Power Supplies (upgradeable option)

11.

Power Supplies Health/Activity Indicators

12.

Removable Riser Cage assembly for 2 x PCIe 3.0 Slots

What's New

New E5-2600 processor option kits with new screw down heatsinks for BTO and CTO server upgrades built after

September/October 2013

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Overview

DA - 14211 North America — Version 47 — December 13, 2013

Page 1

NOTE:

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

Processor

One of the following

depending on Model

E5-2600 v2 series Processors

Entry Processors

NOTE:

All support up to 1333MHz DDR3 memory speeds.

Intel® Xeon® E5-2609 v2 (2.5GHz/4-core/10MB/6.4GT-s QPI/80W)

Intel® Xeon® E5-2603 v2 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)

Base Processors

NOTE:

All support up to1600MHz DDR3 memory speeds.

Intel® Xeon® E5-2640 v2 (2.0GHz/8-core/20MB/7.2GT-s QPI/95W, DDR3-1600, HT, Turbo2-

3/3/3/3/3/3/4/5)

Intel® Xeon® E5-2630 v2 (2.6GHz/6-core/15MB/7.2GT-s QPI/80W, DDR3-1600, HT, Turbo2- 3/3/3/3/4/5)

Intel® Xeon® E5-2620 v2 (2.1GHz/6-core/15MB/7.2GT-s QPI/80W, DDR3-1600, HT, Turbo2- 3/3/3/3/4/5)

Intel® Xeon® E5-2650L v2 (1.7GHz/10-core/25MB/8.0GT-s QPI/70W, DDR3-1600, HT, Turbo2-

2/2/2/2/2/2/2/2/3/4)

Intel® Xeon® E5-2630L v2 (2.4GHz/6-core/15MB/7.2GT-s QPI/60W, DDR3-1600, HT, Turbo2- 2/2/2/2/3/4)

Performance Processors

NOTE:

All support up to 1866MHz DDR3 memory speeds.

Intel® Xeon® E5-2697 v2 (2.7GHz/12-core/30MB/8.0GT-s QPI/130W, DDR3-1866, HT, Turbo2-

3/3/3/3/3/3/3/4/5/6/7/8)

Intel® Xeon® E5-2695 v2 (2.4GHz/12-core/30MB/8.0GT-s QPI/115W, DDR3-1866, HT, Turbo2-

4/4/4/4/4/4/4/4/5/6/7/8)

Intel® Xeon® E5-2690 v2 (3.0GHz/10-core/25MB/8.0GT-s QPI/130W, DDR3-1866, HT, Turbo2-

3/3/3/3/3/3/3/4/5/6)

Intel® Xeon® E5-2680 v2 (2.8GHz/10-core/25MB/8.0GT-s QPI/115W, DDR3-1866, HT, Turbo2-

3/3/3/3/3/4/5/6/7/8)

Intel® Xeon® E5-2670 v2 (2.5GHz/10-core/25MB/8.0GT-s QPI/115W, DDR3-1866, HT, Turbo2-

4/4/4/4/4/4/5/6/7/8)

Intel® Xeon® E5-2667 v2 (3.3GHz/8-core/25MB/8.0GT-s QPI/130W, DDR3-1866, HT, Turbo2-

3/3/3/3/4/5/6/7)

Intel® Xeon® E5-2660 v2 (2.2GHz/10-core/25MB/8.0GT-s QPI/95W, DDR3-1866, HT, Turbo2-

4/4/4/4/4/4/5/6/7/8)

Intel® Xeon® E5-2650 v2 (2.6GHz/8-core/20MB/8.0GT-s QPI/95W, DDR3-1866, HT, Turbo2-

4/4/4/4/5/6/7/8)

Intel® Xeon® E5-2643 v2 (3.5GHz/6-core/25MB/8.0GT-s QPI/130W, DDR3-1866, HT, Turbo2- 1/1/1/1/2/3)

Intel® Xeon® E5-2637 v2 (3.5GHz/4-core/15MB/8.0GT-s QPI/130W, DDR3-1866, HT, Turbo2- 1/1/2/3)

E5-2600 series Processors

Entry Processors

NOTE:

All support up to 1066MHz memory speeds.

Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/6.4GT-s QPI/80W)

Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)

Base Processors

NOTE:

All support up to1333MHz DDR3 memory speeds.

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 2

Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)

Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)

Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)

Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/8.0GT-s QPI/60W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)

Performance Processors

NOTE:

All support up to 1600MHz DDR3 memory speeds.

Intel® Xeon® E5-2690 (2.9GHz/8-core/20MB/8.0GT-s QPI/135W, DDR3-1600, HT, Turbo2-

4/4/4/5/5/7/7/9)

Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/8.0GT-s QPI/130W, DDR3-1600, HT, Turbo2-

4/4/5/5/5/7/8/8)

Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/8.0GT-s QPI/115W, DDR3-1600, HT, Turbo2-

4/4/5/5/6/6/7/7)

Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/8.0GT-s QPI/130W, DDR3-1600, HT, Turbo2- 3/3/3/4/5/6)

Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/8.0GT-s QPI/115W, DDR3-1600, HT, Turbo2-

4/4/5/5/6/6/7/7)

Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/8.0GT-s QPI/95W, DDR3-1600, HT, Turbo2- 5/5/6/6/7/7/8/8)

Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/8.0GT-s QPI/95W, DDR3-1600, HT, Turbo2- 4/4/5/5/5/7/8/8)

Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/8.0GT-s QPI/70W, DDR3-1600, HT, Turbo2-

2/2/3/3/4/4/5/5)

Intel® Xeon® E5-2643 (3.3GHz/4-core/10MB/8.0GT-s QPI/130W, DDR3-1600, HT, Turbo2- 1/1/2/2)

Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/8.0GT-s QPI/80W, DDR3-1600, HT, Turbo2- 5/5)

NOTE:

HT indicates that the processor model supports Intel® Hyper-Threading Technology.

NOTE:

Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost

Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.

NOTE:

DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on

the quantity and type of DIMMs installed.

NOTE:

Up to 2 processors supported. Mixing different processor models is not supported.

NOTE:

For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the

Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =

Processor SKU, and x = L for low power SKUs.

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 3

Cache Memory

One of the following

depending on Model

30MB (1x30MB) Level 3

NOTE:

For Twelve-core processors.

25MB (1x25MB) Level 3

NOTE:

For Ten-core processors.

20MB (1x20MB) Level 3

NOTE:

For Eight-core processors.

15MB (1x15MB) Level 3

NOTE:

For Six-core processors.

10MB (1x10MB) Level 3

NOTE:

For Quad-core processors.

5MB (1x5MB) Level 3

NOTE:

For Dual-core processors.

Chipset

Intel® C600 Series Chipset

Intel® E5-2600 Processor Family

Intel® E5-2600 v2 Processor Family

NOTE:

For more information regarding Intel® chipsets, please see the following URL:

http://www.intel.com/products/server/chipsets/

Upgradeability

Upgradeable to two processors (24 Cores)

NOTE:

Processor upgrade available from Intel® Xeon® Processors E5-2600 to E5-2600 v2. Please contact

HP Technology Sales (

http://www.hp.com/support

), your local HP Re-seller, or reference the following

Customer Advisory:

ProLiant Servers-Instructions for Upgrading an HP ProLiant Gen8 Server from an Intel

Xeon Processor E5-2600 to an Intel Xeon Processor E5-2600 v2

, regarding critical details before

upgrading. An explanation of requirements and limitations are provided.

Up to 24 DIMM slots available for higher memory capacity

Up to 8 SFF Hard Drive Bays; Or 4 LFF or 10 SFF Drive Bay (optional through CTO below)

FlexibleLOM slot for 1Gigabit or 10 Gigabit Ethernet or QDR/FDR InfiniBand networking options

2 PCIe 3.0 I/O slots for additional communications and storage expansion

Redundant Power Supply

Optical Drive Bay (8 SFF/4 LFF)

On System Management

Chipset

HP iLO (Firmware: HP iLO 4)

NOTE:

For more information, visit:

http://www.hp.com/go/ilo

Memory Protection

Advanced ECC

Online Spare

Lock-step mode

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 4

Memory

One of the following

depending on Model

Type

HP SmartMemory

DDR3 Registered (RDIMM), Load Reduced (LRDIMM) or Unbuffered (UDIMM)

memory

DIMM Slots Available

24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs per

channel)

Maximum Capacity

(LRDIMM)

768GB (24 x 32GB@1066MHz)

Maximum Capacity

(RDIMM)

384GB (24 x 16GB@1333MHz)

Maximum Capacity

(UDIMM)

128GB (16 x 8GB@1333MHz)

Maximum Capacity

(HDIMM)

384GB (24 x 16GB@1333MHz)

NOTE:

HP memory from previous generation servers are not qualified or warranted with this HP ProLiant

Server. HP SmartMemory is required to realize the memory performance improvements and enhanced

functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory

QuickSpecs at:

http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html

NOTE:

LRDIMM, RDIMM, UDIMM and HDIMMs are all distinct memory technologies and cannot be mixed

within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.

NOTE:

If only one processor is installed, only 12 DIMM slots are available. When populating with two

processors 24 DIMM slots are available. For maximum speed on some memory options on 16 DIMM slots

may be populated.

NOTE:

When using HDIMMs, 12 DIMMs per processor are required.

NOTE:

Depending on the memory configuration and processor model, the memory speed may run at

1866MHz, 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory

Configuration Tool at:

www.hp.com/go/ddr3memory-configurator

Network Controller

One of the following

depending on Model

HP ProLiant Gen8 servers offer a new networking technology - Flexible Network Technology. The HP

ProLiant DL360p Gen8 server offers the customer the choice of 1 Gigabit and/or 10 Gigabit networking

solutions. For additional details see the Networking Section of this document.

Entry Models

HP Ethernet 1Gb 4-port 331FLR Adapter

Base Models

HP Ethernet 1Gb 4-port 331FLR Adapter

Performance Models

One of the following

depending on Model

HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter

HP Ethernet 1Gb 4-port 331FLR Adapter

HP Ethernet 10Gb 2-port 533FLR Adapter

Energy Star Certified

Models

HP Ethernet 1Gb 4-port 331FLR Adapter

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 5

Expansion Slots Expansion Slots

Technology

Bus

Width*

Connector

Width

Form Factor

Notes

PCIe 3.0

x8 x8

Low profile slot

Activated when

installed with

processor 1

PCIe 3.0

x16 x16

Full-height, half-

length slot

Activated when

installed with

processor 1

*Indicates the number of physical electrical lanes running to the connector.

NOTE:

Two PCIe 3.0 expansion slots: (1) Half-length, full-height slot and (1) low-profile slot.

HP Server ROM

HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is

verified before the flash process starts, reducing accidental programming and preventing malicious efforts

to corrupt system ROM.

HP ROM provides for essential initialization and validation of hardware components before control is

passed to the customer-installed operating system. The ROM also provides the capability of booting from

various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating

system.

HP ROM performs very early configuration of the video controller, to allow monitoring of initialization

progress via an attached monitor. If configuration or hardware errors are discovered during this early

phase of hardware initialization, suitable messages are now displayed on the connected monitor.

Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to

assist in diagnosis.

HP's ProLiant ROM is used to configure the following:

Processor and chipset status registers

System memory, memory map, and memory initialization

System hardware configuration (Integrated PCI devices and optional PCIe cards).

Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).

NOTE:

For further information, please refer to HP's RBSU (ROM based setup utility) user guide:

www.hp.com/support/rbsu

Storage Controller

One of the following

depending on Model

Entry Models

HP Smart Array P420i/ZM (RAID 0/1/1+0)

Base Models

HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)

Performance Models

HP Smart Array P420i/2GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)

Energy Star Models

One of the following

depending on Model

HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)

HP Smart Array P420i/ZM (RAID 0/1/1+0)

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 6

Internal Storage Devices

Diskette Drive

None

Optical Drive

Optional

DVD-ROM, DVD-RW

NOTE:

This option available with all 8SFF or 4LFF drive models.

Hard Drives

None ship standard

Hard Drive Bays

8 SFF drive bays total with Optical drive bay

Optional: 4 LFF bays with Optical drive bay

Optional: 10 SFF bays without optical

NOTE:

HP ProLiant DL360p Series servers offer both SFF, and LFF versions in

CTO. The Optical Drive bay is available with the 4 LFF and 8 SFF models only.

NOTE:

LFF versions are not an upgradeable option from SFF models, or vice

versa.

NOTE:

All Pre-configured Models come populated with some hard drive blanks

installed. Should the customer need additional hard drive blanks, they can

order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or

P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit. These part numbers for

single HDD blanks below are also provided should the customer require

replacement HDD blanks for their server.

Maximum Internal

Storage

Hot Plug SFF SAS

12.0TB

10 x 1.2TB

Hot Plug SFF SATA

10.0TB

10 x 1TB

Hot Plug LFF SAS

12.0TB

4 x 3TB (with optional LFF drive cage)

Hot Plug LFF SATA

16.0TB

4 x 4TB (with optional LFF drive cage)

Hot Plug SFF SAS SSD

8.0TB

10 x 800GB

Hot Plug SFF SATA SSD

4.0TB

10 x 400GB

Hot Plug LFF SATA SSD

3.2TB

4 x 800GB (with optional LFF drive cage)

Interfaces

Serial

Video

2 (1 front, 1 back) not active simultaneously

NOTE:

Front interface is a Mini-video connector and requires Front Video

Adapter Kit (PN 655915-B21).

FlexibleLOM Network Ports

Some models come standard with 4 x 1GB ports while others come with 2 x

10GB ports (See HP Networking section below for more details and options).

HP iLO Remote

Management Network Port

1Gb Dedicated

SD slot

1 Internal secure

NOTE:

The SD slot is not a hot-pluggable device. Customers should not

attempt to plug an SD card into the SD slot while the server is powered.

USB 2.0 Ports

7 total: 4 rear, 2 front, 1 internal (secure)

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 7

Industry Standard

Compliance

ACPI 2.0b Compliant

PCIe 3.0 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

USB 2.0 Compliant

Server Power Cords

All Pre-configured Models servers ship with a high voltage server to PDU power cord.

NOTE:

HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cord that

connects to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to power

distribution units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power

cord (A0K02A). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the 6-

foot NEMA 5-15 to C13 power cord must be ordered separately (AF556A). See Power Cords section for

Power Cord options.

Power Specifications

To review typical system power ratings use the HP Power Advisor which is available via the online tool

located at URL:

www.hp.com/go/proliant-energy-efficient

www.hp.com/go/hppoweradvisor

NOTE:

Power Specification and Technical Content for supported power supplies can be found at:

http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html

Common Slot Power

Supply

NOTE:

Mixing of power supplies in the same server is not supported. All power supplies inside a server

must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not

supported.

HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of

ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest

power supply efficiency without degrading system performance. HP CS power supplies are tested by the

Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP

CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in

three power output options - 460W, 750W, and 1200W - allowing the customer to "right-size" a power

supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark

Compliant, hot-plug and support redundant configurations.

NOTE:

Mixing of power supplies in the same server is not supported. All power supplies must be of the

same output and efficiency rating. If non-matched power supplies are inserted you will get errors and

operation will fail.

HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD)

solution. IPD is the first technology to create an automated, energy-aware network between IT systems

and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and

downtime costs across data centers. For more information on HP's IPD solution, go to

www.hp.com/go/ipd

It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for

your needs. HP Power Advisor can be accessed at:

www.hp.com/go/hppoweradvisor

NOTE:

The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 8

consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus

independently tests power supply efficiency and publicly posts the results on 80Plus.org.

Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through power

supply option kits (see Power Supplies for part numbers).

NOTE:

Power Specification and Technical Content for supported power supplies can be found at:

http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html

System Fans

One of the following

depending on Model

6 fan modules ship standard in 1 processor models

8 fan modules ship standard in 2 processor models

The DL360p Gen8 will support up to 8 fans with fan redundancy built in. One fan rotor failure will place

server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent

server shutdown.

NOTE:

The processor option kit contains 2 additional fan modules, when upgrading from a 1 processor to

two processor models.

Required Cabling

For required cabling information, refer to the Web site at:

www.hp.com/servers/dl360p-gen8

Operating Systems and

Virtualization Software

Support for ProLiant

Servers

Microsoft Windows Server

Canonical Ubuntu

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

Oracle Solaris

VMware

Citrix XenServer

NOTE:

For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization

Software and latest listing of software drivers available for your server including how to purchase from

HP, please visit our OS Support Site at:

http://www.hp.com/go/ossupport

and our driver download page

http://www.hp.com/support/DL360pGen8

Graphics

Integrated Matrox G200 video standard

1280 x 1024 (32 bpp)

1920 x 1200 (16 bpp)

HP iLO 4 On System Management Memory

16 MB Flash

256 MB DDR 3 with ECC (112 MB after ECC and video)

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 9

Form Factor

One of the following

depending on Model

1U Rack form factor

8 SFF and 10 SFF Drive Bay Versions:

1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 27.5" (69.85cm) Length

4 LFF Drive Bay Version:

1.7" (4.32cm) Height x 17.11" (43.47cm) Width x 29.5" (74.67cm) Length

On System Management

HP iLO Management

Engine

HP iLO Management Engine is a comprehensive set of embedded management

features supporting the complete lifecycle of the server, from initial

deployment, through ongoing management, to service alerting and remote

support. HP iLO Management Engine comes standard on all HP ProLiant Gen8

servers. The HP iLO Management Engine portfolio includes:

HP iLO:

The HP iLO (Integrated Lights-Out) management processor is

the core foundation for the HP iLO Management Engine

HP Agentless Management:

Provides built in server health monitoring

and alerting capability without OS agents, that starts working the

moment a power cord and an Ethernet cable are connected.

HP Active Health System:

Always on, continuous monitoring for

increased stability and shorter downtimes; 100% configuration history;

Health and service alerts and easy export and upload to Service and

Support.

HP Intelligent Provisioning:

Lets customers provision and configure a

single server without any separate media. No more SmartStart CDs or

Smart Update Firmware DVD are needed.

To start Intelligent Provisioning:

Press the F10 key during the ProLiant Gen8 server boot

process (also known as power on self test or POST).

Please go to the Intelligent Provisioning website at

www.hp.com/go/intelligentprovisioning

for additional

information and to view usage videos.

Use the Service Pack for ProLiant (SPP) at

www.hp.com/go/spp

to get firmware and software

updates.

HP iLO Mobile App:

Enables the ability to access, deploy, and manage

your server anytime from anywhere from select smartphones and

mobile devices. For additional information please visit:

www.hp.com/go/ilo/mobileapp

NOTE:

For more information, visit:

http://www.hp.com/go/ilo

or HP iLO

Management Engine technologies whitepaper

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 10

HP Insight management

HP Service Pack for

ProLiant

HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)

provide a comprehensive approach to firmware and system software

maintenance. Together they provide better operating stability and ensure

maximum uptime. The SPP will be updated at a predictable cadence, typically

coinciding with new HP server hardware launches. By enabling firmware to be

updated online and integrating firmware and system software updates in one

operation, HP SUM and the SPP offer faster updates of individual servers and

dramatically faster updates of entire BladeSystem enclosures. Further

improving system uptime and stability is the fact that HP provides 12 months

of support for each Service Pack for ProLiant release.

The user experience around HP SUM and the SPP has been improved in several

ways, starting with the web download. A single web page provides access to a

single download containing both the latest version of HP SUM and the latest

SPP. Optional smaller subsets with only specific types of servers or specific

operating systems are offered to save on download time. The HP SUM

application provides a straightforward, intuitive user interface that guides the

user through the steps of discovery, analyses and update, providing

comprehensive information on available updates, criticality and

interdependencies. This information is also available in reports. By providing

the option of multiple local or shared repositories which can be easily updated

from hp.com, HP SUM provides the tools to optimize stability and consistency

throughout the company. While HP SUM and the SPP recommend the

combinations of firmware and system software that HP has found to be the

best practice, the application gives customers the flexibility to set their own

specific baseline.

The Service Pack for ProLiant has been rigorously tested with specific

attention for interaction between firmware, drivers and agents both within the

server as well as in interaction with the BladeSystem enclosure components

(Onboard Administrator and Virtual Connect). This testing ensures the highest

quality as well as providing the input for HP SUM to deploy updates taking into

account all interdependencies, when determining the correct updates and

order of update deployment.

NOTE:

The Service Pack for ProLiant (which includes HP SUM) can be

downloaded from

www.hp.com/go/spp/download

. More information can be

found:

http://www.hp.com/go/SmartUpdate

www.hp.com/go/spp

and

http://www.hp.com/go/hpsum

HP StoreVirtual VSA

HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or Microsoft

Hyper-V virtualized server. This server model starting November 2013, includes a limited license for HP

StoreVirtual VSA software with 1TB of capacity. To download the license key and StoreVirtual VSA

software, visit

www.hp.com/go/unlockVSA

NOTE:

You will need your server serial number in order to complete the registration form.

Fully functional, capacity-based licenses are available in 4TB, 10TB, and 50TB sizes. For more information

and access to the 60-day free trial, visit:

www.hp.com/go/tryVSA

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 11

Security

Power-on password

Serial interface control

Administrator's password

Warranty

This product is covered by a global limited warranty and supported by HP Services and a worldwide

network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available

for three years from date of purchase. Support for software and initial setup is available for 90 days from

date of purchase. Enhancements to warranty services are available through HP Care Pack services or

customized service agreements. Hard drives have either a one year or three year warranty; refer to the

specific hard drive QuickSpecs for details.

NOTE:

Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day

response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts.

These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel

and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR

parts are also designed for easy replacement but may involve added complexity. Customers may choose

to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited

warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Standard Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 12

HP Insight management

HP Insight Control

HP Insight Control, a product option, delivers essential infrastructure

management that can help save time and money by making it easy to deploy,

migrate, monitor, remote control, and optimize your IT infrastructure through

a single, simple management console. HP Insight Control also supports

Location and Power Discovery Services to automate many configuration, asset

tracking, and power management tasks to speed implementation and prevent

downtime. For more information, see

http://www.hp.com/go/insightcontrol

HP Insight Control includes one year of 24 x 7 HP Software Technical Support

and Update Service ensuring rapid access to HP support staff and proactive

delivery of software updates. For more information about this service, see:

http://www.hp.com/services/insight

HP iLO Advanced

HP Integrated Lights-Out Advanced License a product option, providing smart

remote server management without compromise. iLO Advanced unlocks the

full set of remote administration functionality for all HP ProLiant servers by

activating the full Virtual Keyboard Video and Mouse remote console, multi-

user collaboration, console record and replay, GUI-based and scripted virtual

media and virtual folders, and enhanced security and power management

functionality. For more information, see:

http://www.hp.com/go/iloadvance

HP Matrix Operating

Environment

The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity

servers is an integrated command center that helps you instantly adjust to

dynamic business demands. This advanced infrastructure management

software lets you reduce the cost of common data center tasks by up to 40

percent while keeping pace with your changing business.

The HP Matrix OE includes the automated provisioning, optimization, and

recovery management capabilities for HP CloudSystem Matrix, the ideal

platform for private cloud and Infrastructure as a Service (IaaS).

NOTE:

For more information, visit:

http://www.hp.com/go/matrixoe

High Performance

Clusters

HP Cluster Platforms

HP Cluster Platforms are specifically engineered, factory-integrated large-

scale ProLiant clusters optimized for High Performance Computing, with a

choice of servers, networks and software. Operating system options include

specially priced offerings for Red Hat Enterprise Linux and SUSE Linux

Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster

Platform Configurator simplifies ordering.

http://www.hp.com/go/clusters

HP HPC Interconnects

High Performance Computing (HPC) interconnect technologies are available

for this server as part of the HP Cluster Platform portfolio. These high-speed

InfiniBand and Gigabit interconnects are fully supported by HP when

integrated within an HP cluster. Flexible, validated solutions can be defined

with the help of configuration tools.

http://www.hp.com/techservers/clusters/ucp/index.html

HP Insight Cluster

Management Utility

HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-

supported suite of tools that are used for lifecycle management of hyperscale

clusters of Linux ProLiant systems. CMU includes software for the centralized

provisioning, management and monitoring of nodes. CMU makes the

administration of clusters user friendly, efficient, and effective.

http://www.hp.com/go/cmu

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Optional Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 13

Storage Software

Whether you need to solve a specific data protection, archiving, or storage command and control

challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than

HP storage software. Our storage software helps you reduce costs, simplify storage infrastructure,

protect vital assets and respond faster to business opportunities.

Storage software that gets the job done:

Data Protection and Recovery Software

Whether you're a large enterprise or a smaller business, HP data protection and recovery software

will cost-effectively protect you against disaster and ensure business continuity.

Data Archive and Migration Software

HP's storage software enables you to comply with data retention and retrieval requirements,

improve application performance, and reduce costs by efficiently migrating infrequently accessed

or less valuable data to lower cost storage.

Storage Resource Management Software (SRM)

HP's storage resource management software reduces operational costs and provides the command

and control foundation you need to efficiently manage and visualize your physical and virtual

environments.

Data Replication Software

HP offers array-based and host-based replication software for use in disaster recovery, testing,

application development and reporting.

Storage Device Management Software

Maximize your investment in HP storage and networking with software that enables hardware-

specific configuration, performance tuning and connectivity management.

HP StoreVirtual VSA

With HP StoreVirtual VSA you can use the power of virtualization to turn a set of heterogeneous and

disconnected physical disk drives in your servers and storage devices into a single pool of logical

storage capacity.

NOTE:

For more information available Storage Software including QuickSpecs, please see:

www.hp.com/go/storage/software

HP Insight Online

HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP

support information personalized to your IT environment. Insight Online can automatically display devices

remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can

efficiently track your IT support contracts and device status from anywhere and at any time.

www.hp.com/go/insightonline

HP Proactive Insight

experience

Prevent problems with innovative, automated monitoring tools and proactive services. The HP Proactive

Insight experience consist of using Insight Online, Insight Remote Support, and Proactive Care Support

Service as one integrated solution. The Proactive Insight experience provides you with expert advice and

personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve

problems quickly. For more information, visit:

www.hp.com/go/proactiveinsightexperience

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Optional Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 14

Factory Express Portfolio

for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP

servers and storage products. Customers can choose how their factory solutions are built, tested,

integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex

configuration and design services as well as individual factory services, such as image loading, asset

tagging, and custom packaging. HP products supported through Factory Express include a wide array of

servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000

servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network

switches.

For more information on Factory Express services for your specific server model please contact your sales

representative or go to:

http://www.hp.com/go/factory-express

HP Simple Configurator

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial

configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in

your existing ordering processes. If you require "custom" rack configuration or configuration for products

not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for

assistance.

http://www.hp.com/products/configurator

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Optional Features

DA - 14211 North America — Version 47 — December 13, 2013

Page 15

Service and Support

HP Technology Services for Industry Standard Servers

Capitalizing on HP ProLiant server capabilities requires a service partner who understands your

increasingly complex business technology environment. That's why it makes sense to team up with the

people who know HP infrastructure hardware and software best - the experienced professionals at HP

Services.

Protect your business beyond warranty with HP Care Pack Services

HP Care Pack services offer complete care and support expertise with committed response choices

designed to meet your IT and business needs.

HP Foundation Care services offer scalable reactive support-packages for HP industry-standard servers

and software. You can choose the type and level of service that is most suitable for your IT and business

needs. HP Proactive Care delivers high levels of system availability through proactive service management

and advanced technical response.

Optimized Care

Supports maintaining servers at optimum performance availability

3-Year HP 6 hour Call to Repair Response, Proactive Care*

Combined reactive and proactive support for hardware and software helping optimize your systems and

delivering high levels of availability through proactive service management and advanced technical

response. Hardware problem resolution to return the hardware in operating condition within 6 hours of the

initial service request. A Technical Account Manager, as your single point of contact, will own your call or

issue end to end until resolved.

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking

options to assist you in bringing your new hardware into operation in a timely and professional manner

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

Standard Care

Service recommendation that maintains high level of server availability

3-Year HP 24x7 4 hour response, Proactive Care Service*

This service gives you combined reactive and proactive support including rapid access to our Advanced

Solution Center to manage and prevent problems and a Technical Support Specialist with a broad level of

technical knowledge that will engage with additional technical expertise as needed from HP's vast global

resources.

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking

options to assist you in bringing your new hardware into operation in a timely and professional manner

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Service and Support

DA - 14211 North America — Version 47 — December 13, 2013

Page 16

Related Services

HP Proactive Care Personalized Support - Environmental Option

The Personalized Support option provides an assigned Account Support Manager who can bring best

practices from across the industry plus extra technical skills to your IT team. This option is only available

as an add-on to HP Proactive Care Support.

HP Proactive Select Service

Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy

Proactive Select Service Credits when you purchase your hardware and then use the credits over the next

12 months.

http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf

Additional HP Care Pack services can be found at:

http://www.hp.com/go/cpc

Insight Online/Insight

Remote Support

HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and problem

resolution. This comes at no additional cost with your HP solution

. Learn more about Insight Remote

Support

http://www.hp.com/go/insightremotesupport

and Insight Online

http://www.hp.com/go/insightonline

* Insight Remote Support is a prerequisite for Proactive Care.

HP Support Center

Personalized online support portal with access to information, tools and experts to support HP business

products. Submit support cases online, chat with HP experts, access support resources or collaborate with

peers. Learn more

http://www.hp.com/go/hpsc

HP's Support Center Mobile App

allows you to resolve issues yourself or quickly connect to an agent for

live support. Now, you can get access to personalized IT support anywhere, anytime.

HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,

HP Care Pack or HP contractual support agreement.

**HP's Support Center Mobile App is subject to local availability

Parts and Material

HP will provide HP-supported replacement parts and materials necessary to maintain the

covered hardware product in operating condition, including parts and materials for available

and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the

maximum usage limitations as set forth in the manufacturer's operating manual, product

quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these

services.

For more information

To learn more on HP ProLiant servers, please contact your HP sales representative or HP Authorized

ServiceOne Channel Partner. Or visit:

http://www.hp.com/services/proliant

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Service and Support

DA - 14211 North America — Version 47 — December 13, 2013

Page 17

NOTE:

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

NOTE:

Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section

of this QuickSpecs.

NOTE:

HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped

separately.

NOTE:

If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this

QuickSpecs.

NOTE:

All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard

drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8

Hard Drive Blank Kit.

Entry Models

E5-2600 v2 series Processors

HP ProLiant DL360p Gen8

E5-2603v2 1P 4GB-R

P420i/ZM 460W PS Entry

Server

733732-001

Processor(s)

(1) Intel® Xeon® E5-2603 v2 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)

Processor

Cache Memory

10MB (1x10MB) L3

Memory

4GB (1 x 4GB DDR3-1600MHZ RDIMMs)

NOTE:

24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs

per channel).

Network Controller

HP Ethernet 1Gb 4-port 331FLR Adapter

Storage Controller

HP Smart Array P420i/ZM (RAID 0/1/1+0)

Hard Drive

None ship standard; includes 6 SFF hard drive blanks

Internal Storage

Standard: 8 SFF HDD Bays

Optical Drive Bay

1 (Optional: DVD-ROM, DVD-RW)

PCI-Express Slots

2 standard (1-FH/HL, 1-LP) PCIe 3.0

Power Supply

(1) HP 460W Common Slot Gold Hot Plug Power Supply (92% Efficient)

Fans

6 Hot Plug Redundant Fan Modules

Management

HP iLO Management Engine (standard)

Optional: HP iLO Advanced or HP Insight Control

Form Factor

Rack (1U)

NOTE:

Includes the Easy Install Rail kit which does allow for in-rack

serviceability. The Easy Install Cable Management Arm is optional.

Caution:

HP recommends that a minimum of two people are required for all

Rack Server installations. Please refer to your installation instructions for

proper tools and number of people to use for any installation.

Warranty

Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support

with next business day response

E5-2600 series Processors

HP ProLiant DL360p Gen8

E5-2603 1P 4GB-R P420i

SFF 460W PS Entry Server

646900-001

Processor(s)

(1) Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W) Processor

Cache Memory

10MB (1x10MB) L3

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Pre-configured Models

DA - 14211 North America — Version 47 — December 13, 2013

Page 18

SFF 460W PS Entry Server

646900-001

Memory

4GB (1 x 4GB DDR3-1333MHz RDIMMs)

NOTE:

24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs

per channel).

Network Controller

HP Ethernet 1Gb 4-port 331FLR Adapter

Storage Controller

HP Smart Array P420i/ZM (RAID 0/1/1+0)

Hard Drive

None ship standard; includes 7 SFF hard drive blanks

Internal Storage

Standard: 8 SFF HDD Bays

Optical Drive Bay

1 (Optional: DVD-ROM, DVD-RW)

PCI-Express Slots

2 standard (1-FH/HL, 1-LP) PCIe 3.0

Power Supply

(1) HP 460W Common Slot Gold Hot Plug Power Supply (92% Efficient)

Fans

6 Hot Plug Redundant Fan Modules

Management

HP iLO Management Engine (standard)

Optional: HP iLO Advanced or HP Insight Control

Form Factor

Rack (1U)

NOTE:

Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which

does not allow for in rack serviceability. The HP 1U Gen8 Cable Management

Arm is not available when using Friction Rails. To assist in the installation of

the server into the rack an optional installation tool is available by contacting

your local services representative (p/n 695539-001).

Caution:

HP recommends that a minimum of two people are required for all

Rack Server installations. Please refer to your installation instructions for

proper tools and number of people to use for any installation.

Warranty

Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support

with next business day response.

Base Models

E5-2600 v2 series Processors

HP ProLiant DL360p Gen8

E5-2630v2 1P 16GB-R

P420i/1GB FBWC 460W PS

Base Server

733733-001

Processor(s)

(1) Intel® Xeon® E5-2630 v2 (2.6GHz/6-core/15MB/7.2GT-s QPI/80W)

Processor

Cache Memory

15MB (1x15MB) L3

Memory

16GB (2 x 8GB DDR3-1600MHZ RDIMMs)

NOTE:

24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs

per channel).

Network Controller

HP Ethernet 1Gb 4-port 331FLR Adapter

Storage Controller

HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)

Hard Drive

None ship standard; includes 6 SFF hard drive blanks

Internal Storage

Standard: 8 SFF HDD Bays

Optical Drive Bay

1 (Optional: DVD-ROM, DVD-RW)

PCI-Express Slots

2 standard (1-FH/HL, 1-LP) PCIe 3.0

Power Supply

(1) HP 460W Common Slot Platinum Plus Hot Plug Power Supply (94%

Efficient)

Fans

6 Hot Plug Redundant Fan Modules

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Pre-configured Models

DA - 14211 North America — Version 47 — December 13, 2013

Page 19

Management

HP iLO Management Engine (standard)

Optional: HP iLO Advanced or HP Insight Control

Form Factor

Rack (1U)

NOTE:

Includes the Easy Install Rail kit which does allow for in-rack

serviceability. The Easy Install Cable Management Arm is optional.

Caution:

HP recommends that a minimum of two people are required for all

Rack Server installations. Please refer to your installation instructions for

proper tools and number of people to use for any installation.

Warranty

Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support

with next business day response

E5-2600 series Processors

HP ProLiant DL360p Gen8

E5-2640 1P 16GB-R P420i

SFF 460W PS Base Server

646902-001

HP ProLiant DL360p Gen8

E5-2630 1P 16GB-R P420i

SFF 460W PS Base Server

646901-001

Processor(s)

One of the following

depending on Model

(1) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-

1333, HT, Turbo2- 3/3/4/4/5/5) Processor

(1) Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-

1333, HT, Turbo2- 3/3/4/4/5/5) Processor

Cache Memory

15MB (1x15MB) L3

Memory

16GB (4 x 4GB DDR3-1333MHz RDIMMs)

NOTE:

24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs

per channel).

Network Controller

HP Ethernet 1Gb 4-port 331FLR Adapter

Storage Controller

HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)

Hard Drive

None ship standard; includes 7 SFF hard drive blanks

Internal Storage

Standard: 8 SFF HDD Bays

Optical Drive Bay

1 (Optional: DVD-ROM, DVD-RW)

PCI-Express Slots

2 standard (1-FH/HL, 1-LP) PCIe 3.0

Power Supply

(1) HP 460W CS Platinum Plus Hot Plug Power Supply (94% Efficient)

Fans

6 Hot Plug Redundant Fan Modules

Management

HP iLO Management Engine (standard)

Optional: HP iLO Advanced or HP Insight Control

Form Factor

Rack (1U)

NOTE:

Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit

which does allow for in rack serviceability. Due to the size and weight of the

server two people are required to install the server into the rack. The HP 1U

Gen8 Cable Management Arm is optional. To assist in the installation of the

server into the rack an optional installation tool is available by contacting your

local services representative (p/n 695539-001).

Caution:

HP recommends that a minimum of two people are required for all

Rack Server installations. Please refer to your installation instructions for

proper tools and number of people to use for any installation.

Warranty

Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support

with next business day response

Performance Models

QuickSpecs

HP ProLiant DL360p Generation 8 (Gen8)

Pre-configured Models

DA - 14211 North America — Version 47 — December 13, 2013

Page 20

Page is loading ...

Hewlett Packard Enterprise 670632-S21 User manual

Brand: Hewlett Packard Enterprise

Model: 670632-S21

Category: Servers

Type: User manual

This manual is also suitable for

470065-821

Download PDF

report

Hewlett Packard Enterprise 670632-S21 User manual

This manual is also suitable for

Hewlett Packard Enterprise 670632-S21 User manual

Related papers

Other documents