Trendnet TEG-S3M2CG Datasheet

Category
Network switch components
Type
Datasheet

Trendnet TEG-S3M2CG is a versatile networking device that offers a range of connectivity options for expanding your network. With two Gigabit copper ports, it allows you to connect devices like high-speed computers, network storage, or IP cameras at ultra-fast speeds. This module is compatible with the TEG-S3000i Layer 2 Managed Chassis Switch, providing a flexible solution for building a scalable network.

Trendnet TEG-S3M2CG is a versatile networking device that offers a range of connectivity options for expanding your network. With two Gigabit copper ports, it allows you to connect devices like high-speed computers, network storage, or IP cameras at ultra-fast speeds. This module is compatible with the TEG-S3000i Layer 2 Managed Chassis Switch, providing a flexible solution for building a scalable network.

TEG-S3M2CG
2 Gigabit Copper Port
TEG-S3M2CG
rev:05.18.2006
• Compliant with IEEE 802.3ab or IEEE 802.3z Gigabit Standards
• Modules: 2 Gigabit Copper Port (TEG-S3M2CG), 2 Mini-GBIC Slot (TEG-S3M2MG), and Gigabit Copper and Fiber Combo (TEG-
S3M11CF)
• Optional Gigabit Modules for TEG-S3000i (Layer 2 Managed Chassis Switch)
• 5-Year Warranty
FEATURES
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet
products and is subject to change at any time, without notice. For the most recent product information please visit
http://www.trendnet.com.
©
Copyright TRENDnet. All Rights Reserved.
2 Gigabit Copper Port
TEG-S3M2CG
ORDERING INFORMATION
To Order Please Call:
1-888-326-6061
3135 Kashiwa Street,Torrance, CA 90505 USA
Tel: 1-310-891-1100
Fax: 1-310-891-1111
Web:
www.trendnet.com
TEG-S3M8TX
TEG-S3M8FX
TEG-S3000i
4-Slot Gigabit Layer 2 Managed Chassis
8-Port 10/100Mbps Module
• TEG-S3M2CG
8-Port 100Base-FX SC Type Multi-Mode Fiber Module
Dimensions
Interface
LED
Cable Parameters
Weight
Temperature
Certification
Humidity
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• 84 x 88 x 30mm (3.3 x 3.5 x 1.2 in.)
• 10%~90% (non-condensing)
• IEEE 802.3ab Gigabit Copper
• TEG-S3M2CG : 2 x 10/100/1000Mbps Auto-MDIX RJ-45 Port
• TEG-S3M11CF : 1 x 10/100/1000Mbps Auto-MDIX RJ-45 Port , 1 x 1000Base-SX Multi-Mode SC Type Fiber Port
• TEG-S3M2MG : 2 x 3.3v Mini-GBIC Slot
• 200g (7.3 oz.)
• Link/Activity, 1000Mbps, 10000Mbps, Full Duplex, GBIC Fiber
• Gigabit Copper: Cat.5 or Cat.6 4-paris UTP Cables, up to 100m
• Mini-GBIC: – LC Type. 62.5/125ìm or 50/125ìm Multi-Mode Fiber Optic cable (SX)
• Operating: 0°~45°C (32°~113°F) • Storage: -10°~70°C (14°~158°F)
• CE, FCC
Standards
Hardware
SPECIFICATIONS
RELATED PRODUCTS
PACKAGE CONTENTS
8-Port 100Base-FX SC Type Single-Mode Fiber Module
TEG-S3M8S15
• Gigabit SX : 50/125um or 62.5/125um Multi-Mode Fiber Optic, up to 550m (wavelength: 850nm)
LC Type. 9/125ìm or 10/125ìm Single-Mode Fiber Optic cable (LX)
• IEEE 802.3x Flow Control and Back Pressure
• IEEE 802.3z Gigabit fiber for SX and LX
  • Page 1 1
  • Page 2 2

Trendnet TEG-S3M2CG Datasheet

Category
Network switch components
Type
Datasheet

Trendnet TEG-S3M2CG is a versatile networking device that offers a range of connectivity options for expanding your network. With two Gigabit copper ports, it allows you to connect devices like high-speed computers, network storage, or IP cameras at ultra-fast speeds. This module is compatible with the TEG-S3000i Layer 2 Managed Chassis Switch, providing a flexible solution for building a scalable network.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI