HP Color LaserJet 8500 Printer series Reference guide

PCL/PJL ReferenceSetHP

PCL 5

Printer Language

Technical

Quick Reference

Guide

Printed on

Recycled Paper

Hewlett-Packard Co.

Printed in USA

EN 51

Learn.fm Page 51 Tuesday, June 22, 1999 8:29 AM

EN 1

1

Factory Default Print Environment Feature Settings (PCL)

JOB CONTROL

• NUMBER OF COPIES* = 1

• DUPLEX* = Off (Simplex)

• BINDING* = Long-Edge

• TRAY LOCK= All trays unlocked

• JOB SEPARATION = OFF

• MANUAL FEED* = OFF

• REGISTRATION (left = 0, top = 0)

• OUTPUT BIN = Upper

• UNITS OF MEASURE = 300 Units/Inch

PAGE CONTROL

• PRINT DIRECTION = 0

• CHARACTER TEXT PATH DIRECTION* = 0

• TEXT PARSING METHOD* = 0

• ORIENTATION* = Portrait

• PAGE SIZE* = Letter

• PAPER (MEDIA) SOURCE = Main Source (Printer Specific)

• VERTICAL MOTION INDEX * = 8 (6 lpi)

• HORIZONTAL MOTION INDEX = 12 (10 cpi)

• TOP MARGIN = 1/2" (150 dots or 3 lines)

• TEXT LENGTH = 60 lines

• LEFT MARGIN = Left logical page boundary

• RIGHT MARGIN = Right logical page boundary

• PERFORATION SKIP = On

• LINE TERMINATION = CR=CR, LF=LF, FF=FF

FONT SELECTION**

• SYMBOL SET* = ROMAN-8 ***

• SPACING = Fixed

• PITCH = 10 cpi

• HEIGHT = 12 point

• STYLE = Upright

• STROKE WEIGHT = Medium

• TYPEFACE = Courier

• UNDERLINING MODE = Off

FONT MANAGEMENT

• FONT ID = 0

• CHARACTER CODE = 0

• SYMBOL SET ID = 0

MACRO

• MACRO ID = 0

Note: Feature support varies with each printer. See the

PCL 5

Comparison Guide

for specific feature support information.

* For these items, select User Default values using the printer driver or

control panel (or remote control panel for LaserJet 4L, 5L, and 5P).

** The font characteristics are determined by the default font. The default

font can be the factory default font or the user selected default font from

the control panel or from a font cartridge with a default font.

*** PC-8 is the default symbol set for the LaserJet 5L and 5Si/5SiMx

printers.

Learn.fm Page 1 Tuesday, June 22, 1999 8:17 AM

2 EN

2

Factory Default Print Environment Feature Settings (PCL)

(continued)

PRINT MODEL

• SOURCE TRANSPARENCY MODE = 0 (Transparent)

• PATTERN TRANSPARENCY MODE = 0 (Transparent)

• CURRENT PATTERN = Solid (Black)

• PATTERN REFERENCE POINT = 0,0

• PATTERN ROTATION = 0

RECTANGULAR AREA FILL

• HORIZONTAL RECTANGLE SIZE = 0

• VERTICAL RECTANGLE SIZE = 0

• PATTERN (AREA FILL) ID = 0

RASTER GRAPHICS

• RESOLUTION = 75 dpi

• PRESENTATION = 3

• COMPRESSION MODE = 0

• LEFT GRAPHICS MARGIN = 0

• RASTER WIDTH = Logical Page

• RASTER HEIGHT = N/A

TROUBLESHOOTING COMMANDS

• END-OF-LINE WRAP = OFF

• DISPLAY FUNCTIONS = OFF

STATUS READBACK

• CURRENT LOCATION TYPE = 0

• CURRENT LOCATION UNIT = 0

Factory Default Print Environment Feature Settings

(HP-GL/2)

LINE AND FILL GROUP

• LINE TYPE = Solid

• LINE TYPE REPEAT LENGTH = 4% of the diagonal distance from P1

to P2.

• LINE CAP = Butt

• LINE JOIN = Mitered

• MITER LIMIT = 5

• PEN WIDTH = 0.35mm

• PEN WIDTH SELECTION MODE = Metric

• SELECTED PEN = No pen

• FILL TYPE = Solid (bi-directional)

• USER-DEFINED LINE TYPE = Eight standard line types

• ANCHOR CORNER = (0,0) plotter units

• USER-DEFINED FILL TYPES = Solid fill

• TRANSPARENCY MODE = On (transparency)

• SCREENED VECTOR = No screening

Learn.fm Page 2 Tuesday, June 22, 1999 8:17 AM

EN 3

3

Factory Default Print Environment Feature Settings

(HP-GL/2) (continued)

CONFIGURATION AND STATUS GROUP

• SCALE MODE = Off

• WINDOW = PCL default picture frame (PCL default logical page, less

1/2 inch at the top and bottom)

• COORDINATE SYSTEM ORIENTATION = Same as PCL default

logical page

• P1,P2 Lower left, upper right corners of picture frame

CHARACTER GROUP

• SYMBOL SET = Roman-8

• FONT SPACING = Fixed

• PITCH = 10 cpi

• HEIGHT = 12 point

• POSTURE = Upright

• STROKE WEIGHT = Medium

• TYPEFACE = HP-GL/2 stick

• CHARACTER DIRECTION = Horizontal

• CHARACTER DIRECTION MODE = Absolute

• CHARACTER SIZE = Size transformation off

• CHARACTER SIZE MODE = Absolute

• CHARACTER WIDTH = N/A

• CHARACTER HEIGHT = N/A

• CHARACTER SLANT = 0

• EXTRA HORIZONTAL SPACE = 0

• EXTRA VERTICAL SPACE = 0

• CHARACTER FILL MODE = No edging, solid fill

• LABEL ORIGIN = 1

• LABEL TERMINATOR = Etx

• TRANSPARENT DATA MODE = Off

• PRIMARY FONT ID = 0

• SECONDARY FONT ID = 0

• SCALABLE OR BITMAP FONT = Select scalable only

VECTOR GROUP

• PLOTTING MODE = Absolute

• PEN STATE = Up

POLYGON GROUP

• POLYGON BUFFER = Cleared

• POLYGON MODE = Off

Learn.fm Page 3 Tuesday, June 22, 1999 8:17 AM

4 EN

4

Job Control

Universal Exit Language

Causes the printer to exit the current language and return control to PJL.

?

% – 1 2 3 4 5 X

Configuration (AppleTalk)

Allows the user to configure the printer I/O to receive PCL jobs over

AppleTalk I/O.

?

& b # W [Key]<sp>[value]

# = Number of bytes of [key]/[value] data (count space <sp>).

Printer Reset

Restores the User Default Environment, deletes temporary fonts and

macros, and prints any remaining data.

?

E

Number of Copies

Prints the specified number (#) of copies of each page.

? & l # X

# = Number of copies (1 to 99 for III/IIID; 1 to 32,767 for

IIISi, 4 family and 5 family)

Simplex/Duplex Print

Prints front side of a page or both sides (front and back - in either of two

binding modes).

? & l # S

# = 0 - Single side (Simplex)

1 - Duplex, long-edge binding

2 - Duplex, short-edge binding

Left (Long-Edge) Offset Registration

Adjusts the position of the logical page across the width of the page.

? & l # U

# = Number of decipoints (1/720 inch)

[+ or – specifies the plus or minus move

direction (for example, # = –10).]

Top (Short-Edge) Offset Registration

Adjusts the position of the logical page across the length of the page.

? & l # Z

# = Number of decipoints (1/720 inch)

[+ or – specifies the plus or minus move

direction (for example, # = –10).]

Note: The printer ignores any commands sent to it that it does not

support.

Learn.fm Page 4 Tuesday, June 22, 1999 8:17 AM

EN 5

5

Job Control (continued)

Duplex Page Side Selection

Prints the logical page on the specified physical page side.

? & a # G

# = 0 - Select next side

1 - Select front side

2 - Select back side

If a non-duplex printer receives this command, it performs a page eject.

Job Separation

Toggles the printer's job separation mechanism.

? & l 1 T

Output Bin

Selects the output paper bin for paper output.

? & l # G

# = 0 - Automatic selection

1 - Upper Output Bin (for the LaserJet 5Si,

printer top/face-down bin—bin #1)

2 - Rear Output Bin (for the LaserJet 5Si, printer

left/face-up bin—bin #2; this bin is not available

when the High Capacity Output (HCO) is attached)

3 - Selects Bin #3 (HCO face-up bin)

4 - Selects Bin #4 (HCO #1 face-down bin)

5 - Selects Bin #5 (HCO #2 face-down bin)

6 - Selects Bin #6 (HCO #3 face-down bin)

7 - Selects Bin #7 (HCO #4 face-down bin)

8 - Selects Bin #8 (HCO #5 face-down bin)

9 - Selects Bin #9 (HCO #6 face-down bin)

10 - Selects Bin #10 (HCO #7 face-down bin)

11 - Selects Bin #11 (HCO #8 face-down bin)

Unit of Measure

Establishes the unit of measure for the PCL unit.

? & u # D

# = Number of units/inch (96, 100, 120, 144, 150, 160, 180, 200,

225, 240, 288, 300, 360, 400, 450, 480, 600, 720, 800, 900,

1200, 1440, 1800, 2400, 3600, 7200)

Learn.fm Page 5 Tuesday, June 22, 1999 8:17 AM

6 EN

6

Page Control

Page Size

Designates the physical paper size which in turn defines the logical page.

? & l # A

# = 1 - Executive (7.25" x 10.5")

2 - Letter (8.5" x 11")

3 - Legal (8.5" x 14")

6 - Ledger (11" x 17")

25 - A5 paper (148mm x 210mm)

26 - A4 paper (210mm x 297mm)

27 - A3 (297mm x 420mm)

45 - JIS B5 paper (182mm x 257mm)

46 - JIS B4 paper (250mm x 354mm)

71 - Hagaki postcard (100mm x 148mm)

72 - Oufuku-Hagaki postcard (200mm x 148mm)

80 - Monarch Envelope (3 7/8" x 7 1/2")

81 - Commercial Envelope 10 (4 1/8" x 9 1/2")

90 - International DL (110mm x 220mm)

91 - International C5 (162mm x 229mm)

100 - International B5 (176mm x 250mm)

101 - Custom (size varies with printer)

Correct paper tray must be installed for selected paper size.

Page Length (Obsolete—see Paper Size)

Selects the logical page length in lines (one logical page per physical page)

? & l # P

# = Number of Lines

Paper (Media) Source

Designates one of four paper sources for paper feed.

? & l # H

# = 0 - Print current page (paper source remains unchanged)

1 - Feed paper from main paper source

2 - Feed paper from manual input

3 - Feed envelope from manual input

4 - Feed paper from alternate paper source

5 - Feed from optional large paper source

6 - Feed envelope from envelope feeder *

7 - Autoselect

8 - Feed paper from Tray 1 (right side tray)

20 - 39 - High Capacity Input (HCI) Trays 2-21

* Must be used in conjunction with Paper Size.

Learn.fm Page 6 Tuesday, June 22, 1999 8:17 AM

EN 7

7

Page Control (continued)

Page Orientation

Designates the logical page position with respect to the physical page.

? & l # O

# = 0 - Portrait

1 - Landscape

2 - Reverse Portrait

3 - Reverse Landscape

Print Direction

Rotates the logical page coordinate system counterclockwise in 90 degree

increments with respect to the orientation of the current logical page.

? & a # P

# = Degrees of rotation (0, 90, 180, 270)

Character Text Path Direction

Specifies the direction text is printed on the page, providing a means of

printing using either a horizontal or vertical text path.

? & c # T

# = 0 - Horizontal printing

= –1 - Vertical rotated printing

Text Parsing Method

Specifies PCL parsing method as either 1-byte or 2-byte characters

codes.

? & t # P

# = 0, 1 - All character codes processed as one-byte characters

= 21 - Character codes processed as two-byte characters

(see

PCL 5 Comparison Guide

)

= 31 - Character codes processed as two-byte characters

(see

PCL 5 Comparison Guide

)

= 38 - Characters codes processed as two-byte characters (see

PCL 5 Comparison Guide

)

Left Margin

Sets the left margin to the left edge of the specified column.

? & a # L

# = Column number

Right Margin

Sets the right margin to the right edge of the specified column.

? & a # M

# = Column number

Learn.fm Page 7 Tuesday, June 22, 1999 8:17 AM

8 EN

8

Page Control (continued)

Top Margin

Designates number of lines between top of logical page to top of text area.

? & l # E

# = Number of lines

Clear Horizontal Margins

Resets left and right margins to their default settings.

? 9

Horizontal Motion Index (HMI)

Designates the distance between columns. (The value field # is valid to 4

decimal places.)

? & k # H

# = Number of 1/120 inch increments

Vertical Motion Index (VMI)

Designates the distance between rows. (The value field # is valid to 4

decimal places.)

? & l # C

# = Number of 1/48 inch increments between rows

Line Spacing

Sets the number of lines printed per inch (an alternate method for

designating VMI).

? & l # D

# = 1 - 1 line/inch

2 - 2 lines/inch

3 - 3 lines/inch

4 - 4 lines/inch

6 - 6 lines/inch

8 - 8 lines/inch

12 - 12 lines/inch

16 - 16 lines/inch

24 - 24 lines/inch

48 - 48 lines/inch

Text Length

Designates the length of the text area in lines.

? & l # F

# = Number of lines

Perforation Skip

Causes printing to skip from the end of the text area to the top of the next

text area (top margin of new page).

? & l # L

# = 0 - Disabled

1 - Enabled

Learn.fm Page 8 Tuesday, June 22, 1999 8:17 AM

EN 9

9

Cursor Positioning

Cursor positioning can be either absolute or relative. Absolute positioning

specifies the cursor move distances referenced from the left edge of the

logical page and the top margin. Relative positioning specifies cursor

move distances referenced from the current cursor position. Relative

moves are indicated by using signed numbers (e.g. # = +15 or –122);

absolute moves are indicated by unsigned numbers (e.g. # = 15 or 122).

Horizontal Cursor Positioning (in Columns)

Moves the cursor to a new column on the current line (column width

determined by current HMI setting).

? & a # C

# = Column number

Horizontal Cursor Positioning (in Decipoints)

Moves the cursor to a new position along the x-axis.

? & a # H

# = Decipoint position (1/720 inch), valid to 2 decimal places.

Horizontal Cursor Positioning (PCL units)

Moves the cursor to a new position along the x-axis.

? * p # X

# = Number of PCL units

Horizontal Cursor Positioning Control Codes

CR - Carriage-Return

Moves the cursor to the left margin on the current line.

(Operation of CR may be modified—see Line Termination command.)

SP - Space

Moves the cursor one column right on the current line for fixed-space font

or moves the cursor the HMI distance for proportional fonts when space

is a non-printing character.

BS - Backspace

Moves the cursor left, the distance of the last printed character, on the

current line for fixed-space fonts. For proportionally-spaced fonts,

backspace moves the cursor back along the current line the distance

required to center the overstrike character over the last printed character.

Subsequent BS command moves the width of the last printed character.

HT - Horizontal Tab

Moves the cursor to the next tab stop on the current line. (Tab stops are

set every 8th column.)

Learn.fm Page 9 Tuesday, June 22, 1999 8:17 AM

10 EN

10

Cursor Positioning (continued)

Vertical Cursor Positioning (Rows)

Moves the cursor to a new row in the same column (row distances are

determined by the VMI setting).

? & a # R

# = Row number

Vertical Cursor Positioning (Decipoints)

Moves the cursor to a new vertical position along the y-axis.

? & a # V

# = Decipoint position (1/720 inch), valid to 4 decimal places.

Vertical Cursor Positioning (PCL units)

Moves the cursor to a new dot position along the y-axis.

? * p # Y

# = Number of PCL units

Half Line-Feed

Moves the cursor to the same character position one-half line down

(distance moved depends on current VMI).

? =

Vertical Cursor Positioning Control Codes

LF - Line Feed

Moves the cursor to the same horizontal position on the next line.

FF - Form Feed

Moves the cursor to the same horizontal position at the top of the next text

area.

Line Termination

Controls the way the printer interprets CR, LF, and FF control codes.

? & k # G

Push/Pop Cursor Position

Allows the cursor position to be stored and recalled for later use.

(Up to 20 positions may be pushed onto the stack)

? & f # S

# = 0 - Push (Store cursor position)

1 - Pop (Recall a cursor position)

# = 0 - CR = CR, LF = LF, FF = FF

1 - CR = CR+LF, LF = LF, FF = FF

2 - CR = CR, LF = CR+LF, FF = CR+FF

3 - CR = CR+LF, LF = CR+LF, FF = CR+FF

Learn.fm Page 10 Tuesday, June 22, 1999 8:17 AM

EN 11

11

Font Selection

Any number of fonts may be printed per page, limited only by memory.

Symbol Set

Designates the set of symbols or characters contained in a font.

? ( ID

Primary

? ) ID

Secondary

ID = Symbol Set identifier

Common examples:

See Table C-1 in the

PCL 5 Comparison Guide

for more symbol sets.

Spacing

Designates either a fixed or proportionally spaced font.

? ( s # P -

Primary

? ) s # P -

Secondary

# =0 - Fixed spacing

1 - Proportional spacing

Pitch

Designates the horizontal spacing of a fixed spaced font in terms of the

number of characters per inch.

? ( s # H -

Primary

? ) s # H -

Secondary

# = Pitch in characters/inch

Height (Point Size)

Designates the height of the font in points.

? ( s # V -

Primary

? ) s # V -

Secondary

# = Height in points

ID = 8M - HP Math-8 0N - ISO 8859-1 Latin 1

8U - HP Roman-8 0O - OCR A

10U - PC-8 1E - ISO 4: United Kingdom

1G - ISO 21: German 1U - HP US Legal

0U - ASCII 19U - Windows ANSI

Learn.fm Page 11 Tuesday, June 22, 1999 8:17 AM

12 EN

12

Font Selection (continued)

Style

Designates the font style.

? ( s # S -

Primary

? ) s # S -

Secondary

# = 0 - Upright

1 - Italic

4 - Condensed

5 - Condensed Italic

8 - Compressed, Extra Condensed

24 - Expanded

32 - Outline

64 - Inline

128 - Shadowed

160 - Outline Shadowed

Stroke Weight

Designates the thickness or weight of the stroke that composes the

characters of a font.

? ( s # B -

Primary

? ) s # B -

Secondary

Typeface Selection

Designates the design of the font.

? ( s # T -

Primary

? ) s # T -

Secondary

See Table C-2 and C-3 in the

PCL 5 Comparison Guide

for more typeface

values.

Font Selection by ID #

Selects a soft font using its specific ID #.

? ( # X -

Designates soft font as primary

? ) # X -

Designates soft font as secondary

# = Font Identification number (ID #; 0 through 32767)

# = -7 - Ultra thin 1 - Semi Bold

-6 - Extra Thin 2 - Demi Bold

-5 - Thin 3 - Bold

-4 - Extra Light 4 - Extra Bold

-3 - Light 5 - Black

-2 - Demi Light 6 - Extra Black

-1 - Semi Light 7 - Ultra Black

0 - Medium

# = 0 - Line Printer 8 - Prestige

3 - Courier 4099 - Courier (Scalable)

4 - Helvetica 4101 - CG Times

6 - Gothic 4148 - Univers

7 - Script 16602 - Arial

Learn.fm Page 12 Tuesday, June 22, 1999 8:17 AM

EN 13

13

Font Selection (continued)

Select Default Font

Sets all font characteristics (except orientation) to those of the default font.

? ( 3 @

Default primary font characteristics

? ) 3 @

Default secondary font characteristics

Transparent Print Data

Provides printing access to all characters in a font including those defined

as unprintable.

? & p # X

[transparent data ]

# = Number of bytes of transparent print data.

Underline

Controls automatic text underlining.

? & d # D

# = 0 - Underline On

3 - Floating Underline On

? & d @ -

Underline Off

Learn.fm Page 13 Tuesday, June 22, 1999 8:17 AM

14 EN

14

Font Management

Font ID #

Specifies an identification number (ID #) for use in subsequent font

management commands.

? * c # D

# = ID # (0 through 32767)

Font Control

Provides the means for manipulating soft fonts within the printer.

? * c # F

# = 0 - Delete all soft fonts

1 - Delete all temporary soft fonts

2 - Delete soft font (last ID specified)

3 - Delete Character Code (last ID and character code)

4 - Make soft font temporary (last ID specified)

5 - Make soft font permanent (last ID specified)

6 - Copy/Assign current invoked font as temporary

Alphanumeric ID

Specifies alphanumeric String IDs for fonts, macros, and media types.

Specifies media selection by the type of media and supports enhancements

for the printer disk drive.

? & n # W

[operation][string]

# = Number of bytes of string data

Operations

0 - Set the current Font ID to the given String ID.

1 - Associates current Font ID to font with supplied

String ID.

2 - Selects the font referred to by the String ID as primary.

3 - Selects the font referred to by the String ID as

secondary.

4 - Sets the current Macro ID to the String ID.

5 - Associates the current Macro ID to the supplied

String ID.

20 - Deletes the font association named by the current

Font ID.

21 - Deletes the macro association named by the current

Macro ID.

100 - Media select

Note: See the

PCL 5 Printer Language Technical Reference Manual

for

additional information about the Font Descriptor command and the

Character Descriptor command data fields.

Learn.fm Page 14 Tuesday, June 22, 1999 8:17 AM

EN 15

15

User-Defined Symbol Set

Symbol Set ID Code

Assigns an identification code to a user-defined symbol set.

? * c # R

# = Symbol set ID code.

Define Symbol Set

Downloads symbol set definition data for a user-defined symbol set.

? ( f # W

[symbol set definition data]

# = Number of symbol set definition bytes.

Symbol Set Control

Provides a means for manipulating user-defined symbol sets.

? * c # S

# = 0 - Delete user-defined symbol sets (temporary

and permanent)

1 - Delete all temporary symbol sets

2 - Delete symbol set (last symbol set ID code specified)

4 - Make symbol set temporary (last symbol set

ID code specified)

5 - Make symbol set permanent (last symbol set

ID code specified)

Soft Font Creation

Font Descriptor

Downloads the font descriptor to the printer.

? ) s # W

[ font descriptor data ]

# = Number of font descriptor data bytes

Character Code

Establishes the decimal character code that will be associated with the

next character downloaded or deleted.

? * c # E

# = Decimal character code

Character Descriptor/Data

Downloads the character descriptor and character data.

? ( s # W

[binary data bytes]

# = Number of binary data bytes

Learn.fm Page 15 Tuesday, June 22, 1999 8:17 AM

16 EN

16

Macros

Macro ID #

Specifies an ID # for a macro for use in subsequent macro commands.

? & f # Y

# = Macro ID # (0 through 32767)

Macro Control

Provides the mechanism for definition, invocation, and deletion of macros.

? & f # X

# = 0 - Start macro definition (for last ID specified)

1 - Stop macro definition

2 - Execute macro (for last ID specified)

3 - Call macro (for last ID specified)

4 - Enable macro for automatic overlay

(for last ID specified)

5 - Disable automatic overlay

6 - Delete all macros

7 - Delete all temporary macros

8 - Delete macro (for last ID specified)

9 - Make macro temporary (for last ID specified)

10 - Make macro permanent (for last ID specified)

Learn.fm Page 16 Tuesday, June 22, 1999 8:17 AM

EN 17

17

Print Model

Source Transparency Mode

Sets the source image's transparency mode to transparent or opaque.

? * v # N

# = 0 - Transparent (default)

1 - Opaque

Pattern Transparency Mode

Sets the pattern's transparency mode to transparent or opaque.

? * v # O

# = 0 - Transparent (default)

1 - Opaque

Pattern (Area Fill) ID

Specifies the level of shading, type of cross-hatch, or user-defined pattern

to select via Select Pattern command. See the following page for command

description.

Select Current Pattern

Identifies the type of pattern to be applied to the source.

? * v # T

# = 0 - Solid Black (default)

1 - Solid White

2 - Shading Pattern

3 - Cross-Hatch Pattern

4 - User-Defined Pattern

Logical Operation

Specifies the logical operation (ROP3) to be performed.

? * l # O

# = 0 - 255 (for specific operations refer to the

PCL 5

Comparison Guide

for the logical operation values)

Pixel Placement

Determines how pixels are rendered in images.

? * l # R

# = 0 - Grid intersection (default)

1 - Grid centered

Learn.fm Page 17 Tuesday, June 22, 1999 8:17 AM

18 EN

18

Rectangular Area Fill Graphics

Horizontal Rectangle Size (Decipoints or Dots)

Specifies the rectangular fill area width in decipoints or dots.

? * c # H -

Decipoints

# = Number of decipoints (1/720 inch)

? * c # A -

Dots

# = Number of dots (see Unit of Measure Command)

Vertical Rectangle Size (Decipoints or Dots)

Specifies the rectangular fill area height in decipoints or dots.

? * c # V -

Decipoints

# = Number of decipoints (1/720 inch)

? * c # B -

Dots

# = Number of dots (see Unit of Measure Command)

Set Pattern Reference Point

Sets pattern reference point to cursor position and will either keep pattern

fixed or rotate with print direction changes.

? * p # R

# = 0 - Rotate patterns with print direction

1 - Keep patterns fixed

Pattern (Area Fill) ID (Pattern ID)

Specifies the level of shading or type of cross-hatch to select via Fill

Rectangular Area command.

? * c # G

If Shading fill is selected: OR, if Cross-Hatch Pattern

fill is selected:

# = 1 thru 2 = 1-2% shade

3 thru 10 = 2-10% shade

11 thru 20 = 11-20% shade

21 thru 35 = 21-35% shade

36 thru 55 = 36-55% shade

56 thru 80 = 56-80% shade

81 thru 99 = 81-99% shade

100 = 100% shade

OR, if User-Defined Pattern

# = # of Pattern

Range = 0-32767

Learn.fm Page 18 Tuesday, June 22, 1999 8:17 AM

Page is loading ...

HP Color LaserJet 8500 Printer series Reference guide

Related papers

Other documents