Casio XJ-H2650 User manual

DATA PROJECTOR

User’s Guide

z Be sure to read the precautions in the Quick Start Guide that

comes with the Data Projector.

z Be sure to keep all user documentation handy for future

reference.

z To obtain the latest version of this manual visit the website at the

URL below.

http://world.casio.com/manual/projector/

XJ-H2600/XJ-H2650

*

* USB Port Models

E

2

z DLP is a registered trademark of Texas Instruments of the United States.

z Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing, LLC.

z XGA is a registered trademark of IBM Corporation of the United States.

z PJLink is a trademark applied for registration or is already registered in Japan, the United States

of America and other countries and areas.

z Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.

z AMX is a registered trademark of AMX LLC of the United States.

z Other company and product names may be registered product names or trademarks of their

respective owners.

z Portions of this product are based in part on the work of the Independent JPEG Group.

z The contents of this User’s Guide are subject to change without notice.

z Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO

COMPUTER CO., LTD.

z CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third

parties arising out of the use of this product or this manual.

z CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of

data due to malfunction or maintenance of this product, or any other reason.

z The sample screens shown in this manual are for illustrative purposes only, and may not be

exactly the same as the screens actually produced by the product.

z Unless specifically stated otherwise, all illustrations in this manual show the XJ-H2650.

B

3

Contents

About this manual... ...............................................................................5

Projector Overview ......................................................... 6

Projector Features and Main Functions .................................................6

Remote Controller and Projector Keys...................................................8

Back Terminals.......................................................................................9

Loading Remote Controller Batteries...................................................10

Setting Up the Projector.......................................................................10

Setup Precautions ................................................................................11

Connecting to an Image Output Device...................... 12

Connecting the Analog RGB Output of a

Computer to the Projector....................................................................12

Connecting the HDMI Output of a Video Device or

Computer to the Projector....................................................................13

Connecting to a Video Device..............................................................14

Connection to a composite video output or S-video output ..................................... 14

Connection to a component video output................................................................. 15

Operation During Projection ........................................ 16

Selecting the Input Source ...................................................................16

To select a different input source .............................................................................. 16

Resolution .................................................................................................................. 16

3D Input Mode ........................................................................................................... 17

Horizontal Flipping in the 3D Input Mode .................................................................. 18

Image Operations During Projection ....................................................19

Adjusting Image Brightness....................................................................................... 19

To use manual keystone correction........................................................................... 19

Selecting the Color Mode .......................................................................................... 20

Zooming an Image..................................................................................................... 20

Momentarily Blanking the Image and Muting the Audio............................................ 21

Freezing an Image...................................................................................................... 21

Displaying a Pointer in the Projected Image.............................................................. 22

Changing the Aspect Ratio of the Projected Image .................................................. 23

4

Adjusting the Volume Level..................................................................24

To adjust the volume level ......................................................................................... 24

To mute the audio...................................................................................................... 24

Eco Mode (Power Saving, Low Noise) .................................................25

To select the Eco Mode............................................................................................. 25

Using the [FUNC] Key ..........................................................................26

Configuring Advanced Projector Settings .................. 27

Basic Setup Menu Operations .............................................................27

Displaying the Setup Menu........................................................................................ 27

Configuring Setup Menu Settings.............................................................................. 27

Basic Setup Menu Example....................................................................................... 28

Direct Power On......................................................................................................... 29

Custom Logo Capture..........................................................................30

Password Protection ............................................................................32

Inputting a Password................................................................................................. 32

Using the Password Feature...................................................................................... 32

Control Panel Lock...............................................................................35

Restoring Projector Settings to Their Initial Factory Defaults ..............36

Setup Menu Contents ..........................................................................38

Image Adjustment 1 Main Menu................................................................................ 38

Image Adjustment 2 Main Menu................................................................................ 40

Volume Adjustment Main Menu................................................................................. 40

Screen Settings Main Menu....................................................................................... 41

Input Settings Main Menu.......................................................................................... 43

Option Settings 1 Main Menu .................................................................................... 44

Option Settings 2 Main Menu .................................................................................... 46

Wired LAN Settings Main Menu (USB Port Models Only) ......................................... 48

USB Settings Main Menu (USB Port Models Only) ................................................... 48

Operational Info Main Menu ...................................................................................... 49

Restore All Defaults Main Menu................................................................................. 49

Cleaning the Projector.................................................. 50

Cleaning the Projector Exterior ............................................................50

Cleaning the Lens.................................................................................50

Cleaning the Vents ...............................................................................50

5

Troubleshooting ............................................................ 51

Indicators..............................................................................................51

Error Indicators and Warning Messages ..............................................51

Projector Troubleshooting....................................................................54

Appendix ........................................................................ 56

Remote Controller Signal Range..........................................................56

Using the MONITOR OUT Terminal .....................................................57

Hanging the Projector from a Ceiling ...................................................58

Projection Distance and Screen Size ...................................................59

Aspect Ratio Setting and Projection Image .........................................60

Supported Signals................................................................................62

Using Wired LAN to Control the Projector

(XJ-H1650, XJ-H1750, XJ-H2650, XJ-ST145, XJ-ST155)....................65

Supported External Devices ...................................................................................... 65

Controlling the Projector from a Computer ............................................................... 65

Projector RS-232C Control ..................................................................70

Connecting the Projector to a Computer................................................................... 70

Specifications.......................................................................................73

All of the operations in this manual are explained using the remote controller that comes with the

projector.

About this manual...

6

Projector Overview

This section describes the features of the projector, and explains the functions of the projector and

remote controller keys.

XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-H2600/XJ-H2650/XJ-ST145/

XJ-ST155

z Mercury-free Hybrid Light Source:

A CASIO-original laser and LED hybrid light source delivers high luminance from 2,500 to 4,000

lumens. This projector does not use a mercury lamp, making it environmentally friendly.

z A wide selection of input sources:

Analog RGB, composite video, S-video, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input

sources are supported.

z Intelligent Brightness Control function (Eco Mode):

The projector senses surrounding light levels and adjusts projection brightness automatically as

required for efficient low-power operation. (Requires “Eco Mode” setting to be set to “On (Auto)”.)

z 3D image projection support:

Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input

sources (analog RGB, composite video, S-video) is supported.

z Pointer:

The remote controller can be used to select one of a variety of different pointers for use during

projection.

z Direct Power On:

The projector can be configured to turn on automatically and start projecting as soon as it is

plugged into a power outlet.

XJ-H2600/XJ-H2650

z WXGA Resolution:

The XJ-H2600/XJ-H2650 models support WXGA (1280 × 800) resolution for optimal viewing of

content formatted for today’s widescreen displays. This makes it perfect for projecting images from

widescreen notebook PCs and HD video input sources.

Projector Features and Main Functions

* Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in

3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D

image with the projector when a computer (analog RGB) is the input source.

* 3D image projection is not supported via an HDMI connection or component video connection.

7

XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155

z Projection of Data from USB Memory or a Memory Card without a Computer*

1

:

USB memory or a memory card (using a commercially available USB card reader) can be connected

directly to the projector’s USB-A port. Special EZ-Converter FA software, which is available by

download from the CASIO website, can be used to convert PowerPoint data to a format that is

compatible with the projector. The projector-compatible data can be saved to USB memory or a

memory card and used as presentation data without a computer. Images and movies also can be

projected directly from USB memory or a memory card.

z Interactive Pointing Function:

You can use a separately available interactive pointer (YA-P10) to draw lines and figures directly on

an image being projected by the projector from a connected computer. You can also use the

pointer to perform mouse operations.

z Multi Projection Camera (YC-400, YC-430) Connection*

1

:

A CASIO Multi Projection Camera can be connected directly to the projector’s USB-A port for fine

resolution projection of documents and other images. Document camera capabilities allow

projection of data without going through a computer.

z Graphic Scientific Function Calculator Connection*

1

:

Certain CASIO graphic scientific calculator models can be connected directly to the projector’s

USB-A port for projection of the calculator screen contents.

z Projection of Computer Screen Contents via Wireless LAN*

2

:

The projector comes with a wireless LAN adapter. After a wireless LAN connection is established,

the contents of the computer screen can be sent to the projector for projection.

z Support for Wireless projection from MobiShow*

2

:

You can install AWIND’s MobiShow (client software for wireless connection to a projector) on a

smartphone or mobile terminal, and then use the projector to project photographs and presentation

files stored in the smartphone or terminal memory.

z Projector operation via wired or wireless LAN:

Remote control of the projector is supported via a wired connection to the LAN port on the back or

the projector or via wireless LAN. For details, see “Using Wired LAN to Control the Projector” (page

65).

* Note that the type of terminal and the MobiShow version can limit certain functions or can even

make projection impossible.

*1 For details, see the “USB Function Guide”.

*2 For details, see the “Wireless Function Guide”.

8

Operations in this manual are presented based on the remote controller that comes with the projector.

Major operation keys are also provided on the projector unit, so the most of the same procedures can

also be performed directly on the projector.

Remote Controller Keys

The remote controller does not come with batteries loaded. You need to load the two supplied

batteries before use.

Important!

To avoid running down the batteries, store the remote control unit so its keys are not pressed

inadvertently.

Projector Keys and Indicators

Note

You can configure the projector so operations of its keys are disabled and only remote controller

operations are valid. This helps to protect against accidental mis-operation. For details, see

“Control Panel Lock” (page 35).

Remote Controller and Projector Keys

Remote control signal emitter

CLASS 1 LED PRODUCT

Cursor keys (S/T/W/X)

[ENTER] key ([STYLE] key)

[D-ZOOM +] [D-ZOOM –] keys

[KEYSTONE +] [KEYSTONE –] keys

[POINTER] key

[FUNC] key

[AUTO] key

[BLANK] key

[FREEZE] key

[COLOR MODE] key

[VOLUME] key

[BRIGHT] key ([O] key)

[ECO] key ([f] key)

[ASPECT] key ([Z] key)

[INPUT] key

[MENU] key

[P] (Power) key

[ESC] key

TEMP indicator

LIGHT indicator

[ENTER] key

POWER/STANDBY indicator

[MENU] key

[P] (Power) key

[ESC] key

[INPUT] key Cursor keys (q/w/U/I)

[AUTO] key

9

1 USB-A port (XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 only)

2 LAN port (XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 only)

3 HDMI port

4 MONITOR OUT terminal

5 COMPUTER IN 1 terminal

6 COMPUTER IN 2 terminal

7 Remote control signal receiver

8 Power connector

9 SERIAL port*

1

bk AUDIO OUT terminal

bl Anti-theft lock hole

bm AUDIO IN 1 terminal

bn AUDIO IN 2 terminal

bo AUDIO IN L/R terminals

bp VIDEO terminal

bq S-VIDEO terminal

br USB-B port*

2

(XJ-H1650/XJ-H1750/XJ-H2650/XJ-ST145/XJ-ST155 only)

Back Terminals

*1 This terminal is for controlling the projector from an external device. It normally is not used. For

information about using control commands and other details, See “Projector RS-232C Control”

(page 70).

*2 This port is for USB connection between the projector and a computer when using the optionally

available interactive pointer (YA-P10).

87 9 bk bl bm bn bp bq brbo

123 4 5 6

10

Important!

Be sure to use alkaline batteries only.

Replacing Remote Controller Batteries

Open the battery cover on the back of the remote controller, replace the old batteries with new ones,

and then close the battery cover.

Place the projector onto a table, desk, or stand that is level and firm, making sure you allow enough

room around it. Best results can be obtained when the projector is pointed directly at the screen, and

not at an angle.

z The projector can be configured for projection from the back of a screen. For details, see

“Projection Mode” (page 42) under “Screen Settings Main Menu”.

Loading Remote Controller Batteries

*

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

1.

Open the battery cover on the back

of the remote controller.

2.

Load two new batteries into the

case, making sure that their positive

(+) and negative (–) ends are facing

correctly.

3.

Close the battery cover on the back of the remote controller.

Setting Up the Projector

XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 XJ-H2600/XJ-H2650/XJ-ST145/XJ-ST155

Screen

11

z Use a conveniently located power outlet that you can reach easily when you need to unplug the

projector.

z Do not allow any objects to be within the area indicated by the dashed line below, which is an area

within 30cm (11.8 inches) of the projector. Keep all obstacles and other objects at least 30cm away

from the projector’s vents.

z Airflow from air conditioning equipment can blow the heat being exhausted from the area around

the projector’s lens in a way that causes heat ripples to appear in the projected image. If this

happens, adjust the airflow of the air conditioning equipment or move the projector.

Setup Precautions

Intake-exhaust vents

30cm

(11.8 inches)

Intake-exhaust vents

Intake vents

12

Connecting to an Image Output Device

Connect the projector’s COMPUTER IN 1 or COMPUTER IN 2 terminal to the RGB terminal of a

computer as shown in the illustration below.

Important!

z Always turn off the projector and the computer before connecting them.

z Take care so the volume level of the computer is not set too high.

Connecting the Analog RGB Output of a Computer to

the Projector

Projector Computer

Bundled mini D-Sub cable

Audio cable (commercially available)

AUDIO IN 2 terminal

To monitor terminal

(analog RGB output terminal)

COMPUTER IN 1 terminal

To line output terminal

AUDIO IN 1 terminal

COMPUTER IN 2 terminal

13

The projector supports projection and output of HDMI video and audio output from a computer or

video device.

Important!

Turn off the projector and the computer or video device before connecting them.

z You will need to obtain a commercially available HDMI cable with a connector that matches the

terminal of the output device on one end and a connector that matches the projector’s HDMI port

(HDMI Type A Socket) on the other end.

z For information about HDMI video signal supported by the projector, see page 64.

z The projector supports L-PCM 32kHz, 44.1kHz, and 48kHz HDMI audio signals.

Connecting the HDMI Output of a Video Device or

Computer to the Projector

Projector

HDMI port

To HDMI output terminal

Computer or video device

HDMI cable (commercially available)

14

The projector is able to project images from the composite video output, S-video output, or

component video output of a connected video device.

Important!

Always turn off the projector and the video device before connecting them.

Connection to a composite video output or S-video output

Note

Note that regardless of whether the image being projected is being input via the projector’s

S-VIDEO terminal or VIDEO terminal, the projector outputs audio that is input via the projector’s

AUDIO IN L/R terminals.

Connecting to a Video Device

To S-video output terminal

To video/audio output

terminal

Yellow: To VIDEO terminal

To S-VIDEO terminal

Red: To AUDIO IN R terminal

White: To AUDIO IN L terminal

Projector

Video device

S-video cable (commercially available)

Pin plug type video/audio cable

(commercially available)

15

Connection to a component video output

z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match

the colors of the plugs on a component video cable with the colors of the terminals (Green: Y;

Blue: Cb/Pb; Red: Cr/Pr).

z Note that connection only to an analog component video output terminal is supported.

Connection to a digital output terminal is not supported.

Projector

AUDIO IN 1 terminal

COMPUTER IN 1 terminal

Stereo mini plug

Ù

Pin plug type audio cable

(commercially available)

Component video cable (commercially available)

To component video output

terminals

To audio output terminals

Video device

RedWhite

AUDIO IN 2 terminal

COMPUTER IN 2 terminal

16

Operation During Projection

Turning on the projector initially causes the same input source that was selected the last time it was

turned off to be selected.

To select a different input source

1.

Press the [INPUT] key.

z This displays the input source selection screen.

2.

Select either the Normal Input Mode or 3D Input Mode depending on the type of

image you want to project.

z For details, see “3D Input Mode” (page 17).

3.

Use the [T] and [S] keys to select the name of the input source you want to

select and then press the [ENTER] key.

z The name of the input source you select appears in the upper right corner of the projection

screen for a few seconds.

z The message “No signal input” will appear if no input signal can be selected.

Resolution

Depending on the projector model, its video resolution will be fixed at XGA (1024 × 768 pixels) or

WXGA (1280 × 800 pixels). Images may appear coarse, text and other figures may be difficult to read

or a moire pattern may appear when the input signal from a computer does not match the projector’s

video resolution. If this happens, try doing the following.

z Change the computer’s output resolution setting so it matches the projector’s video resolution.

For information about the video resolution of your projector, see the “DLP chip” item of the

“Specifications” (page 73). See the user documentation that comes with your computer for details

about changing its settings.

z Change the “Aspect Ratio” setting to “True” (Applies only to models that support WXGA video

resolution).

With the “True” setting, the projector projects the input signal at its actual size (1 input source dot

equal to one projector output pixel dot).

For information about configuring the Aspect Ratio setting, see “Changing the Aspect Ratio of the

Projected Image” (page 23).

Selecting the Input Source

17

3D Input Mode

Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D

input mode, and then select the input source.

Important!

z Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in

3D.

z Separately available special software (CASIO 3D Converter) is required to project a 3D image

with the projector when a computer (analog RGB) is the input source.

z 3D image projection is not supported via an HDMI connection or component video

connection.

The input sources described below can be selected for projection in the 3D Input Mode.

Note

See “3D Signals (3D Input Mode)” (page 64) for a list of 3D image signals supported by this

projector.

Entering the 3D Input Mode

1.

Press the [INPUT] key to display the input source selection screen.

2.

Select Computer 1 (RGB), Computer 2 (RGB), S-video, or Video as the input

source.

3.

Use the [T] and [S] keys to move the highlighting to “To 3D input mode” and

then press the [ENTER] key.

z This enters the 3D input mode and closes the input source selection screen.

Important!

z You cannot select HDMI or USB as the input source in the 3D input mode. To use either of

these input sources, change the input source setting back to normal input mode.

z When Computer 1 (or Computer 2) is selected as the input source in the 3D input mode, a

component video signal input through the projector’s COMPUTER IN 1 (or COMPUTER IN 2)

terminal is treated as an RGB signal resulting in abnormal image projection.

z Except when using the projector for 3D image projection, you should normally leave it in the

normal input mode.

Input Source Projection Conditions

Computer (Analog RGB) z Any of the following types of 3D image data played back using separately available

special software (CASIO 3D Converter).

– 2D image file converted to a 3D image file using CASIO 3D Converter

– Side-by-side 3D format files

z Signal with 60Hz/120Hz vertical scan frequency

Composite Video, S-video z Field sequential 3D format files recorded with field sequential DVD software, etc.

z Signal with 60Hz vertical scan frequency

18

Returning to the Normal Input Mode from the 3D Input Mode

1.

Press the [INPUT] key to display the input source selection screen.

2.

Use the [T] and [S] keys to move the highlighting to “To normal input mode”

and then press the [ENTER] key.

z This enters the normal input mode and closes the input source selection screen.

Horizontal Flipping in the 3D Input Mode

In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases,

the left and right images may be reversed, which causes a loss of 3D depth. If this happens, try using

the following procedure to swap the left and right images with each other.

To swap the left and right images

In the 3D input mode, press the [ENTER] key.

19

You can perform the following operations while projecting an image.

z Image brightness adjustment

z Manual keystone correction

z Color mode selection

z Image zooming

z Momentarily blanking the image and muting the audio

z Image freeze

z Pointer display in the projected image

z Aspect ratio switching

Adjusting Image Brightness

Note

(for USB port model users)

Use the setup menu (page 27) to adjust image brightness when the input source is an external

device connected to the USB-A port.

1.

Press the [BRIGHT] key.

z This displays the brightness adjustment window.

2.

Use the [W] and [X] keys to adjust image brightness.

3.

To hide the window, press the [ESC] key.

To use manual keystone correction

The projector has a keystone correction feature that prevents

distortion of the projected image when projecting from an

angle. The projector detects when it is at a vertical angle to the

screen and performs keystone correction automatically.

You can use the [KEYSTONE +] and [KEYSTONE –] keys to

adjust keystone correction manually.

Image Operations During Projection

20

Selecting the Color Mode

You can select from among various different color mode settings in accordance with image contents

and projection conditions.

Important!

z The color mode cannot be selected in the following cases.

z The color mode cannot be selected while “On” is selected for the setup menu “Option

Settings 2 J Interactive Pointer” setting. Though the color mode change operation may be

possible on some projector models, doing so may cause problems with the optional

interactive pointer (YA-P10) in some color modes.

To change the color mode

1.

Press the [COLOR MODE] key.

z This displays the color mode selection window. The currently selected color mode is the one

whose button is selected (filled in).

2.

Use the [T] and [S] keys to move the highlighting to the color mode you want to

select, and then press the [ENTER] key.

z This will select the button next to the highlighted color mode name.

z For details on what each color mode does, see “Color Mode” (page 39) under “Image

Adjustment 1 Main Menu”.

3.

To hide the window, press the [ESC] key.

Zooming an Image

1.

Press the [D-ZOOM +] key.

z This will enlarge the center of the projected image one step.

2.

To zoom in on the center of the projected image more, press the [D-ZOOM +]

key again. To zoom out, press the [D-ZOOM –] key.

z Each press of [D-ZOOM +] zooms in (increases the zoom factor), while [D-ZOOM –] zooms

out. Holding down either key continuously scrolls the zoom factor.

3.

While an image is zoomed, use the [S], [T], [W], and [X] keys to scroll the view

to other parts of the image.

4.

To exit the zoom operation, press the [ESC] key.

z When “Off” is selected for the Eco Mode setting (page 25)

z When the projector is in the 3D input mode. See “3D Input Mode” (page 17).

Page is loading ...

Casio XJ-H2650 User manual

Related papers

Other documents