CRITICAL DIMENSIONS
(DO NOT SCALE)
MOEN
®
Two-Handle Tub/Shower Valve
Model: 82402
32"(813mm) FOR
TUB/SHOWER
COMBINATIONS
AND TUB
MODELS ONLY
MIN. 2"(51mm)
MAX. 2-7/8" (73mm)
FINISHED
WALL LINE
6'-6"
(1981mm)
NOMINAL
ESCUTCHEON
LEVER
HANDLE
DIVERTER
TUB SPOUT
FLOOR
4"
OPENING
DIRECTION
SHOWER
45"(1143mm)/
48"(1219mm)
4"
NOTE:
VALVE CAN
BE ADJUSTED
FOR DOWN
FEED INST.
HOT
INLET
COLD
INLET
OPENING
DIRECTION
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Chrome plated metal construction
• 1/2" connections: IPS - exterior, CC - exterior
• Includes head, arm, flange and diverter tub spout
OPERATION
• Dual control
• Lever handles
• Handles rotate toward spout to open
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) max.
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel materials
STANDARDS
• Third party certified to CSA B125, ASME A112.18.1M,
ANSI A117.1 and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 8/08
/