Ergotron MX Desk Mount LCD Arm User manual

Brand: Ergotron

Model: MX Desk Mount LCD Arm

Category: Flat panel desk mounts

Type: User manual

Ergotron MX Desk Mount LCD Arm

Ergotron MX Desk Mount LCD Arm is a versatile and ergonomic solution for mounting your LCD monitor or TV on your desk. With its adjustable arm, you can easily position your screen for optimal viewing comfort. The arm extends up to 5 inches (130 mm) and rotates 360 degrees, allowing you to find the perfect angle for your needs. The arm also tilts 75 degrees forward and backward, so you can reduce glare and eye strain.

The Ergotron MX Desk Mount LCD Arm is easy to install and comes with all the necessary hardware. It is compatible with VESA-compliant monitors and TVs with a weight capacity of 14 to 30 lbs (6.35 to 13.61 kg).

Ergotron MX Desk Mount LCD Arm

1/10

888-45-155-W-03 rev. H • 02/14

User's Guide - English

Guía del usuario - Español

Manuel de l’utilisateur - Français

Gebruikersgids - Deutsch

Benutzerhandbuch - Nederlands

Guida per l’utente - Italiano

Användarhandbok - svenska

MX Desk Mount LCD Arm

ENGLISH

For the latest User Installation Guide please visit: www.ergotron.com

User's Guide

2/10

888-45-155-W-03 rev. H • 02/14

ENGLISH

Safety

Important! You will need to adjust this product after installation is complete. Make sure all your

equipment is properly installed on the product before attempting adjustments. This product should

move smoothly and easily through the full range of motion and stay where you set it. If movements

are too easy or difﬁ cult or if product does not stay in desired positions, follow the adjustment

instructions to create smooth and easy movements. Depending on your product and the adjustment,

it may take many turns to notice a difference. Any time equipment is added or removed from this

product, resulting in a change in the weight of the mounted load, you should repeat these adjustment

steps to ensure safe and optimum operation.

WARNING! Pinch Point

WARNING! Stored Energy Hazard: The arm mechanism is under tension

and will move up rapidly, on its own, as soon as attached equipment is

removed. For this reason, DO NOT remove equipment unless the arm has

been moved to the highest position! Failure to follow this instruction may

result in serious personal injury and/or equipment damage!

3/10

888-45-155-W-03 rev. H • 02/14

ABCD EFG

4mm

M6 x 10mm

M6 x 12mm

M4 x 10mm

1x 1x

1x 4x 3x

M3 x 6mm

M4 x 10mm

0˚/90˚

(130 mm)

75˚

5˚

180˚

360˚

180˚

14 - 30 lbs

(6.35 - 13.61 kg)

M4 x 12mm

M5 x 12mm

M5 x 20mm

M5 x 7mm

M6 x 12mm

ENGLISH

Components

Tools Needed

Features & Speciﬁ cations

CAUTION: DO NOT EXCEED

MAXIMUM LISTED WEIGHT

CAPACITY. SERIOUS INJURY

OR PROPERTY DAMAGE MAY

OCCUR!

M8M5 Converter

4/10

888-45-155-W-03 rev. H • 02/14

M6 x 10mm

4mm

< .63" (16 mm)

M6 x 12mm

.5" - 1.63" (11 - 41 mm)

1.42" - 2.6" (36 - 66 mm)

4mm

< 3"

(80 mm)

0.31" - 2"*

(8 - 80 mm)

ENGLISH

Choose Mounting Method

CAUTION: For secure arm attachment and to avoid equipment damage, plate must

make contact with underside of desk on both sides of the hole.

5/10

888-45-155-W-03 rev. H • 02/14

M3 x 6mm

90˚

0˚

75x75mm

100x100mm

100x200mm

200x200mm

200x100mm

100mm (3-15/16”)

75mm (2-15/16”)

100mm (3-15/16”)

75mm (2-15/16”)

100mm (3-15/16”)

200mm (7-7/8”)

100mm (3-15/16”)

200mm (7-7/8”)

ENGLISH

VESA Adapter

Con gurations

TV/Monitor Hole

Pattern Sizes

Check size of

TV/Monitor hole

pattern

6/10

888-45-155-W-03 rev. H • 02/14

75 x 75mm

100 x 100mm

M4 x 10mm

75x75mm

100x100mm

100mm (3-15/16”)

75mm (2-15/16”)

100mm (3-15/16”)

75mm (2-15/16”)

ENGLISH

Mount Type A TV/Monitor to Arm

7/10

888-45-155-W-03 rev. H • 02/14

100mm (3-15/16”)

200mm (7-7/8”)

100mm (3-15/16”)

200mm (7-7/8”)

100x200mm 200x200mm 200x100mm

M5 x 7mm

4x4x 4x

M4 x 12mm M5 x 12mm M6 x 12mm

ENGLISH

Mount VESA Adapters to Arm based on TV/Monitor hole

pattern size (B, C, or D) .

Mount Type B, C, or D TV/Monitor to Arm

NOTE: To reduce M8

holes for use with M5

screws, or if you have a

model with Samsung

holder rings, follow the

M8M5 KIT instructions

on the next page.

8/10

888-45-155-W-03 rev. H • 02/14

M5 x 20mm

ENGLISH

M8M5 KIT Instructions

NOTE: Follow this step only if your TV/monitor has M8 holes which need to be

reduced to M5.

NOTE: Follow this step only for Samsung models using the holder ring.

Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor

screws to secure.

Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws

and Samsung holder ring to secure.

TV/Monitor Mounting

M8 size hole

TV/Monitor Mounting

M8 size hole

Holder Ring

(Not included *Samsung Only)

9/10

888-45-155-W-03 rev. H • 02/14

4mm

(130 mm)

75˚

5˚

ENGLISH

Adjustment Step

Important! You will need to adjust this product after installation is complete. Make sure all your equipment is

properly installed on the product before attempting adjustments. This product should move smoothly and easily

through the full range of motion and stay where you set it. If movements are too easy or difﬁ cult or if product

does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.

Depending on your product and the adjustment, it may take many turns to notice a difference. Any time

equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you

should repeat these adjustment steps to ensure safe and optimum operation.

Increase Friction

If this product moves too easily, then

you'll need to increase friction:

Decrease Friction

If this product is too difﬁ cult to move,

then you'll need to decrease friction:

Tilt – Forward and Backward

Increase Lift Strength

If the mounted weight is too heavy or

this product does not stay up when

raised, then you'll need to increase

Lift Strength:

Decrease Lift Strength

If the mounted weight is too light or

this product does not stay down when

lowered, then you'll need to decrease

Lift Strength:

Lift – Up and down

Cable Routing

10/10

888-45-155-W-03 rev. H • 02/14

ENGLISH

For local customer care phone numbers visit: http://contact.ergotron.com

Learn more about ergonomic computer use at:

www.computingcomfort.org

Set Your Workstation to Work For YOU!

Height Position top of screen slightly below eye level.

Position keyboard at about elbow height with wrists ﬂ at.

Distance Position screen an arm's length from face—at least 20” (508mm).

Position keyboard close enough to create a 90˚ angle in elbow.

Angle Tilt screen to eliminate glare.

Tilt the keyboard back 10° so that your wrists remain ﬂ at.

To Reduce Fatigue

Breathe - Breathe deeply through your nose.

Blink - Blink often to avoid dry eyes.

Break • 2 to 3 minutes every 20 minutes

• 15 to 20 minutes every 2 hours.

Ergotron MX Desk Mount LCD Arm User manual

Brand: Ergotron

Model: MX Desk Mount LCD Arm

Category: Flat panel desk mounts

Type: User manual

Ergotron MX Desk Mount LCD Arm

Download PDF

report

Ergotron MX Desk Mount LCD Arm User manual

Ergotron MX Desk Mount LCD Arm User manual

Related papers

Other documents