Fire Magic Cut & Clean Combo User manual

Fire Magic
Brand
Fire Magic
Model
Cut & Clean Combo
Category
Barbecues & grills
Type
User manual

This manual is also suitable for

Fire Magic Cut & Clean Combo is an innovative kitchen appliance that combines a cutting board and a trash chute into one convenient unit. Made of durable stainless steel, this combo is designed to be installed over a trash can and provides a hygienic and efficient way to dispose of food waste and scraps while preparing meals. The cutting board is removable and dishwasher safe, making it easy to clean. The trash chute is also removable and can be easily emptied into the trash can below. The Cut & Clean Combo is a great addition to any kitchen, providing a convenient and sanitary way to keep your workspace clean and organized. Here are some of the key features and benefits of the Fire Magic Cut & Clean Combo:

Fire Magic Cut & Clean Combo is an innovative kitchen appliance that combines a cutting board and a trash chute into one convenient unit. Made of durable stainless steel, this combo is designed to be installed over a trash can and provides a hygienic and efficient way to dispose of food waste and scraps while preparing meals. The cutting board is removable and dishwasher safe, making it easy to clean. The trash chute is also removable and can be easily emptied into the trash can below. The Cut & Clean Combo is a great addition to any kitchen, providing a convenient and sanitary way to keep your workspace clean and organized. Here are some of the key features and benefits of the Fire Magic Cut & Clean Combo:

REV 0 - 1106271049
L-C2-372
1
Robert H. Peterson Co. • 14724 East Proctor Avenue • City of Industry, CA 91746
INSTALLER: Leave these instructions with consumer.
CONSUMER: Retain for future reference.
CUT & CLEAN COMBO
(CUTTING BOARD & TRASH CHUTE)
Fig. 1-1
2
4
Item Description Qty.
1. Stainless steel assembly 1
2. Trash chute assembly 1
3. Cutting board 1
4.
Trash can cover plate 1
MODEL # 53816
1
3
REV 0 - 1106271049
L-C2-372
2
ORIENTATION
Install if applicable
(shown installed over
a FireMagic trash can,
not included)
(countertop)
SPECIFICATIONS
Countertop cut-out
for trash chute
4.5"
9.5"
15.25"
16.25"
15"
Specifi cation Value
Unit width 16
1
/
4
"
Unit length 15
1
/
4
"
Unit (downward) depth 15"
Specifi cation Value
Cut-out width 9
1
/
2
"
Cut-out length 4
1
/
2
"
(knock-out)
REV 0 - 1106271049
L-C2-372
3
INSTALLATION
The Cut & Clean Combo was designed to be installed
over a trash can. A built-in trash can is available from your
FireMagic dealer.
Ensure a trash can is properly installed into your island,
then proceed as instructed below.
1. Determine the location on the countertop that the cut-
out (for the unit's trash chute) must be, based upon
the location of the trash can below (Fig. 3-1).
Note: If your unit is to be installed over a FireMagic trash
can; the cut-out must be directly above the opening
found on the top of the trash can. The opening on
the trash can must fi rst be knocked-out. Fig. 3-1
illustrates this setup.
2. Once the countertop cut-out is created, drop the unit
assembly into place (Fig. 3-2). Use silicone to secure
the unit to the countertop.
3. Drop the trash chute into place (Fig. 3-3).
Note: If your unit is to be installed over a FireMagic
trash can; the trash chute should properly and
completely drop down into the opening of the trash
can. The opening is larger than the trash chute
to allow for tolerance during installation. A cover
plate is supplied to close up any resulting gaps.
Secure the cover plate around the trash chute, and
onto the trash can by using silicone or appropriate
screws. Reference the orientation drawing on the
previous page.
4. Position the cutting board in place (Fig. 3-4).
Fig. 3-1 Countertop cut-out
Fig. 3-2 Drop unit into place
(countertop)
Countertop cut-out
for trash chute
4.5"
9.5"
(shown installed
over a FireMagic
trash can, not
included)
Fig. 3-3 Drop trash chute into place
Fig. 3-4 Position cutting board in place
REV 0 - 1106271049
L-C2-372
4
CARE & CLEANING
The Cut & Clean Combo is exposed to raw foods and should
be cleaned after each use.
The cutting board and trash chute are removable and
should be washed thoroughly. They are dish-washer safe.
The interior surfaces of the unit should also be cleaned
/ disinfected with soapy water or an appropriate kitchen
cleaner safe for stainless steel. Use caution not to treat the
interior of the unit with chemicals that may come in contact
with future food preparations. Always wipe with the grain.
The trash can below should be emptied regularly to prevent
the trash chute from backing up.
The exterior of the unit should be cleaned by fi rst using
grill cleaner to remove grease and dirt. Always wipe with
the grain (see Fig. 4-1). Next, use stainless steel cleaner
to restore the stainless steel color. Finish by wiping your
appliance down using polish wipes. Use caution not to
treat the interior of the unit with chemicals that may come
in contact with future food preparations.
Fig. 4-1 Clean exterior, wipe with grain
Wipe with
grain
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Fire Magic Cut & Clean Combo User manual

Fire Magic
Brand
Fire Magic
Model
Cut & Clean Combo
Category
Barbecues & grills
Type
User manual
This manual is also suitable for

Fire Magic Cut & Clean Combo is an innovative kitchen appliance that combines a cutting board and a trash chute into one convenient unit. Made of durable stainless steel, this combo is designed to be installed over a trash can and provides a hygienic and efficient way to dispose of food waste and scraps while preparing meals. The cutting board is removable and dishwasher safe, making it easy to clean. The trash chute is also removable and can be easily emptied into the trash can below. The Cut & Clean Combo is a great addition to any kitchen, providing a convenient and sanitary way to keep your workspace clean and organized. Here are some of the key features and benefits of the Fire Magic Cut & Clean Combo:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents