Polycom SoundPoint IP 450 User manual

Category
IP phones
Type
User manual
SIP 3.2 | July 2009 | 1725-12495-001 Rev. B
User Guide for the Polycom®
SoundPoint IP® 450 Phone
© 2009 Polycom, Inc. All rights reserved.
Polycom, Inc.
4750 Willow Road
Pleasanton, CA 94588-2708
USA
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for
any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating
into another language or format.
As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software
contained within its products. The software is protected by United States copyright laws and international treaty
provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).
Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible
for printing or clerical errors. Information in this document is subject to change without notice.
ii
Trademark Information
POLYCOM
®
, the Polycom “Triangles” logo and the names and marks associated with Polycom’s products are
trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States
and various other countries. All other trademarks are property of their respective owners. No portion hereof may be
reproduced or transmitted in any form or by any means, for any purpose other than the recipient’s personal use, without
the express written permission of Polycom.
Patent Information
The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications
held by Polycom, Inc.
Disclaimer
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of
incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal
injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties
are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This
warranty gives you specific legal rights which may vary depending on local law.
Copyright Notice
Portions of the software contained in this product are:
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd. and Clark Cooper
Copyright © 1998 by the Massachusetts Institute of Technology
Copyright © 1998-2003 The OpenSSL Project
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved
Copyright © 1995-2002 Jean-Loup Gailly and Mark Adler
Copyright © 1996-2004, Daniel Stenberg, <[email protected]>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
iii
About This Guide
Thank you for choosing the SoundPoint IP 450 , a full-duplex, hands-free SIP
desktop phone. This unit provides business telephony features and functions
such as multiple call appearances, call hold, transfer, and conference over an
IP network.
This guide provides everything you need to quickly use your new phone. Be
sure to verify with your system administrator that your network is prepared
for configuring your SoundPoint IP 450 phone. As well, be sure to read the
Getting Started with Your Phone and Regulatory Notices sections of this guide
before you set up and use the SoundPoint IP 450 phone. You can also find this
information at http://www.polycom.com/support/voicedocumentation/.
Changes to This Guide
The following section is new for this edition:
Information Status on page 1-7
Changing the Soft Key Label Color on page 2-10
Major updates have occurred to the following sections since the previous
edition:
Changing the Background on page 2-9
Searching the Corporate Directory on page 2-18
Enabling Do Not Disturb on page 3-18
User Guide for the SoundPoint IP 450 Desktop Phone
iv
v
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Changes to This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –iii
1 Getting Started with Your Phone . . . . . . . . . . . . . . . . . . . . 1–1
Registering Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Before You Use Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Navigating Menus and Entering Data . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Information Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7
2 Customizing Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Configuring Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Changing the Appearance of Time and Date . . . . . . . . . . . . . . . . . . . . 2–2
Changing the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Changing the Backlight Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4
Enabling the Headset Memory Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Selecting the Correct Headset for Electronic Hookswitch . . . . . . . . . 2–6
Selecting the Ring Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7
Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
Changing the Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9
Changing the Soft Key Label Color . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Managing Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Managing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–12
Adding Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–13
Editing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–16
Deleting Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–16
Placing Calls to Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–17
Searching for Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–18
Managing Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–20
User Guide for the SoundPoint IP 450 Desktop Phone
vi
Distinguishing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–20
Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–21
Diverting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–21
System Customizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–22
Supporting Multiple Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–22
Supporting Multiple Line Keys Per Line . . . . . . . . . . . . . . . . . . . . . . 2–23
Supporting Shared Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–23
3 Using the Basic Features of Your Phone . . . . . . . . . . . . . . . 3–1
Placing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4
Ending Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7
Redialing Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7
Placing Calls on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7
Hosting Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–8
Setting Up Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9
Managing Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10
Adding Parties to Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
Joining Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Splitting Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Ending Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–16
Enabling Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–18
Assigning Speed Dial Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–19
Using Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–21
4 Using the Advanced Features of Your Phone . . . . . . . . . . . 4–1
Using Multiple Call Appearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Using Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Using Buddy Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Changing Presence Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Managing Buddies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Integrating With Microsoft Live Communications Server 2005 . . . . 4–6
Restarting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
5 Troubleshooting Your Phone . . . . . . . . . . . . . . . . . . . . . . . 5–1
Power and Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3
Contents
vii
Access to Screens and Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4
Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8
Productivity Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8
Testing Phone Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–9
Regulatory Notices . . . . . . . . . . . . . . . . .Regulatory Notices–1
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index–1
End-User License Agreement for Polycom® Software
User Guide for the SoundPoint IP 450 Desktop Phone
viii
1 - 1
1
Getting Started with Your Phone
This chapter provides basic installation instructions and information for
obtaining the best performance with the SoundPoint IP 450 desktop phone.
The SoundPoint IP 450 provides a powerful, yet flexible IP communications
solution, delivering excellent voice quality. The high-resolution graphic
display supplies content for call information, multiple languages, directory
access, and system status. The SoundPoint IP 450 supports advanced
functionality, including multiple call and flexible line appearances, HTTPS
secure provisioning, presence, custom ring tones, local conferencing,
applications, and Polycom
®
HD™ Voice technology.
For the package parts list and instructions on how to assemble your phone,
refer to the SoundPoint IP 450 Quick Start Guide.
This chapter contains:
Registering Your Phone
Features of Your Phone
Before You Use Your Phone
To customize your phone, refer to Customizing Your Phone on page 1-1. To
read about the phone’s basic features, refer to Using the Basic Features of Your
Phone on page 3-1. To read the phone’s advanced features, refer to Using the
Advanced Features of Your Phone on page 4-1.
If you require additional information or assistance with your new phone,
contact your system administrator.
For information on supported headsets, go to
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html and look for “Technical Bulletin 37477: Headset Compatibility List”.
User Guide for the SoundPoint IP 450 Desktop Phone
1 - 2
Registering Your Phone
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it. For detailed information on how to
register your phone after you install it, refer to “Quick Tip 44011: Registering
Standalone SoundPoint IP, SoundStation IP, and Polycom VVX Phones” at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html .
Features of Your Phone
Getting Started with Your Phone
1 - 3
The features of your SoundPoint IP 450 phone are:
Item Description
1 Message Waiting
Indicator
Alert for voice and text (instant)
messages.
2 Line Indicators Individual multi-color LEDs display
the dynamic call state and remote
user status (busy lamp field (BLF)
and presence). The mapping is:
Solid green—An active call is in
progress.
Fast flashing green—There is an
incoming (ringing) call.
Flashing green—The call is held
by the other party.
Flashing red—The call is on hold.
Solid red—The line is busy
remotely (shared lines)
3 Line/Speed Dial Key Use these keys to activate up to three
lines or speed dials that can be
assigned to your phone.
4 Arrow Keys Scroll through displayed information
or options.
Select a field of displayed data.
5
Speakerphone
Allows for hands-free communication
during calls.
6 Feature Keys Access important features using
these keys.
Access local (your phone) and global
(your organization) features.
Access and manage text and voice
messages.
Dials most recently dialed party.
7 Microphone Mute Mutes audio transmission locally
during calls and conferences.
User Guide for the SoundPoint IP 450 Desktop Phone
1 - 4
8 Hands-free Microphone Picks up audio during hands-free
calls. Place your phone on a hard, flat
surface for best results.
9 Volume Keys Adjusts the volume of the handset,
headset, speaker, and ringer.
10 Dial Pad Provides the 10 digits, the alphabetic
characters, and special characters
available in context-sensitive
applications.
11
Headset
Allows you to place and receive calls
through an optionally connected
headset.
12
Hold
Holds an active call or resumes a
held call.
13 Speaker For ringer and hands-free audio
output.
14 Soft Keys These keys are automatically labeled
to identify their context-sensitive
functions.
15 Graphic Display Shows information about calls,
messages, soft keys, time, date, and
other relevant data.
Caller display information—first
party, second party, number of
calls
Information status line
• Popup text (for example,
network errors)
• Do Not Disturb text
• Missed call text or second
incoming caller display
• Prompt text (for example, “Enter
number”)
• Time and date text (if idle
display is not used for time/date
display)
Associated line icons are described in
the following table.
16 Hookswitch
Item Description
Getting Started with Your Phone
1 - 5
Icons associated with the line keys appear on the screen and represent:
Icon Description
Registered line (solid)
Registered shared line
Unregistered line (outline)
Voice mail/Text messages
Speed dial
Ringing
Call in progress with HD Voice
Call in progress
Call Forward
Do Not Disturb
Conference
Presence/Busy Lamp Field (BLF)
User Guide for the SoundPoint IP 450 Desktop Phone
1 - 6
Before You Use Your Phone
Navigating Menus and Entering Data
To help you navigate menus and enter data, use these tips:
To scroll through lists, use and , or hold down and .
Press the * key to page up. Press the # key to page down. Use these
shortcuts when lists appear on more than one page.
To exit from any menu, press .
To return to the previous menu, press the Back soft key.
To cancel the current edit session, press the Cancel soft key.
To delete text, press the << soft key.
To view additional soft keys, press the More soft key.
To select a value from a list, use and .
Use the dial pad keys to navigate through and make selections in
numbered menu lists.
The navigation guide on right-hand side of the screen shows which arrow
keys can be used at a particular sublevel.
For example, you can use and at this point.
Note
The background and key colors that appear on your SoundPoint IP 450 phone may
differ from what appears in this user guide.
Note
After 20 seconds of inactivity, the menu system automatically exits to the idle
screen unless an edit session is in progress.
Getting Started with Your Phone
1 - 7
To enter text using the dial pad, press the number keys one or more times.
For example, for ‘A’ press 2 and for ‘C’ press 222. When in text entry mode,
the title will show whether keys will generate digits (1), upper-case (A), or
lower-case (a) characters— use the 1/A/a soft key to change—and whether
keys will generate ASCII, Latin, Cyrillic, Katakana, or Unicode
characters—use the Encoding soft key to change.
Information Status
The top line of the screen (or graphic display) shows status information. It
appears as a scrolling list if there is more than one message. The number of
messages in the list also appears. In order of precedence from highest to
lowest, the messages are:
Popup text (for example, network errors)
Do Not Disturb text
Missed call text or second incoming caller display
Prompt text (for example, “Enter number”)
Time and date text
The following figures provide some examples:
User Guide for the SoundPoint IP 450 Desktop Phone
1 - 8
2 - 1
2
Customizing Your Phone
You can customize your SoundPoint IP 450 desktop phone by adjusting the
setting for time and date, display contrast, and ring type, for example. You can
add contacts to the phone’s directory manually or from call lists. You can
handle incoming calls from different contacts in different ways.
This chapter provides basic operating instructions for customizing your
SoundPoint IP 450 phone. This chapter contains:
Configuring Basic Settings
Managing Call Lists
Managing Contacts
Managing Incoming Calls
Some customizations of your SoundPoint IP 450 phone are performed by your
system administrator. These include:
Supporting Multiple Lines
Supporting Multiple Line Keys Per Line
Supporting Shared Lines
To read about the phone’s basic features, refer to Using the Basic Features of
Your Phone on page 3-1. To read about the phone’s advanced features, refer to
Using the Advanced Features of Your Phone on page 4-1.
If you require additional information or assistance with your new phone,
contact your system administrator.
Configuring Basic Settings
You can configure the following basic settings through use of :
Appearance of the time and date
Display contrast
User Guide for the SoundPoint IP 450 Desktop Phone
2 - 2
Backlight intensity
Headset Memory Mode
Headset hookswitch selection
Ring type
Language support (localization)
Background pattern
Soft key label color
You can mute the microphone and adjust the volume using separate keys.
Changing the Appearance of Time and Date
The time and date appears on the screen of the SoundPoint IP 450 phone. If the
phone cannot obtain a time and date from the call server, the display will flash.
Contact your system administrator if either the time or date is incorrect.
You can select from various formats for the time and date display. Select and
set options that are right for you. You can also disable the time and date
display, so the time and date do not display on the phone screen.
To configure the time and date formats:
1. Press .
2. Select Settings > Basic > Preferences > Time & Date.
3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable.
4. Scroll through the options under each of these selections.
Customizing Your Phone
2 - 3
5. Press the Select soft key to confirm your choice.
The following figure shows the Clock Time menu.
6. Press to return to the idle screen.
Changing the Display Contrast
To adjust the contrast on the screen to a comfortable level:
1. Press .
2. Select Settings > Basic > Contrast.
3. Press the Up or Down soft keys to increase or decrease the display
contrast.
4. Press the Ok soft key.
5. Press to return to the idle screen.
Note
You can also use the volume keys to increase or decrease the diplay contrast.
User Guide for the SoundPoint IP 450 Desktop Phone
2 - 4
Changing the Backlight Intensity
Backlight intensity on the SoundPoint IP 450 phone has three components:
Backlight On
Backlight Idle
Maximum Intensity
You can modify the Backlight On intensity and the Backlight Idle intensity
separately. You can select high, medium, low, and off levels for both.
When you modify the Maximum Intensity, you are modifying the entire
backlight intensity scale. For example, if you decrease the Maximum Intensity,
the low, medium, and high values for both Backlight On intensity and the
Backlight Idle intensity decrease.
The Backlight On intensity applies for the following events:
Any key press
Hookswitch release
Incoming calls
Ending a call, holding a call, resuming a call by the other party
A voice or instant message received
If you do not press any keys on the phone after 20 seconds of the backlight
turning on, the backlight dims (or changes) to medium in the following cases:
A call is in progress
A call is on hold
There is an incoming call (ringing)
There is an outgoing call (ringing back)
Any menu shows on the display
In all other cases, the Backlight Idle intensity applies.
To modify the backlight intensity:
1. Press .
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92

Polycom SoundPoint IP 450 User manual

Category
IP phones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI