Ketcham Cabinets Ketcham-SSF-2436, Ketcham-SSF-1014, Ketcham-SSF-1620, Ketcham-SSF-1630, Ketcham-SSF-1824, Ketcham-SSF-1836, Ketcham-SSF-2430 Installation guide

Hello! I'm a chat assistant that has reviewed the installation instructions for the Stainless Steel Mirror Series Surface Mounted. I can help answer questions based on the provided document. The instructions detail the mirror's construction from stainless steel with a bright annealed finish, and emphasize the need for proper installation techniques.
What type of stainless steel is used for this mirror?

What is the recommended method for unboxing the mirror?

What kind of screws are recommended for installation?

What type of walls are these installation instructions applicable to?

Product Information

Installation Steps

1/2

Stainless Steel Mirror Features:

- Type 430, 20 gauge stainless steel

with bright annealed ﬁnish

**Professional Installation is recommended to insure proper installation.

**Please do not stand your mirror on end while unboxing. Lie the wall mirror down mirror side up prior to

installation. Set on a clean surface, like a towel or carpet to avoid damage.

**Prior to discarding the packaging, locate hardware and screws where applicable.

NOTICE:

1. The installation instructions provided are for typical drywall/wood stud type walls. Additional hardware

may/will be required for different wall types. Always make sure you adequately brace the mirror for secure

installation. Do not screw directly into drywall without proper bracing.

PRIOR TO INSTALLATION:

** In order to install this mirror, you will need to supply your own installation materials.

** It is recommended to use tamper proof washers and screws for installation.

INSTALLATION INSTRUCTIONS

STAINLESS STEEL MIRROR SERIES — SURFACE MOUNTED