IFM AC2307 is a dual sensor designed for use with pneumatic valve actuators. It provides sensor and actuator supply, as well as data transfer to the controller via AS-i 2-wire cable. The device features a watchdog function that switches off the output if the connection to the master is interrupted for more than 40ms. Diagnostic information is displayed via a red LED for short circuit or cable break. Additionally, the data bits provide detailed information about sensor positions, actuator errors, and output status.
IFM AC2307 is a dual sensor designed for use with pneumatic valve actuators. It provides sensor and actuator supply, as well as data transfer to the controller via AS-i 2-wire cable. The device features a watchdog function that switches off the output if the connection to the master is interrupted for more than 40ms. Diagnostic information is displayed via a red LED for short circuit or cable break. Additionally, the data bits provide detailed information about sensor positions, actuator errors, and output status.
IFM AC2307 is a dual sensor designed for use with pneumatic valve actuators. It provides sensor and actuator supply, as well as data transfer to the controller via AS-i 2-wire cable. The device features a watchdog function that switches off the output if the connection to the master is interrupted for more than 40ms. Diagnostic information is displayed via a red LED for short circuit or cable break. Additionally, the data bits provide detailed information about sensor positions, actuator errors, and output status.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI