2. peak design
  3. M-CM-AE-BK-WEB-1 1 Inch Ball Adaptor

peak design M-CM-AE-BK-WEB-1 1 Inch Ball Adaptor Operating instructions

  • Hello! I'm a chat assistant familiar with the Peak Design 1" Ball Adapter instructions. I've reviewed the document and I'm ready to answer your questions about the charging ball adapter, its magnetic attachment, and how to install it.
  • What kind of phone case is required for the mount to work?
    How does the mount connect to the phone?
    What should I do if the mount is not attached correctly?
more info
pkdsn.com/chargingballadapter
1” BALL ADAPTER CHARGING
INSTRUCTIONS
GET TO KNOW
YOUR MOUNT
requires Peak Design Case
or MagSafe Phone/Case
not included
INSTALLATION ATTACH/DETACH PHONE
Cable Clips
x3
Charging
Port
USB-C
Embedded
Magnets x4
USB-C to
USB-C Cable
(1m)
Connect Peak Design 1” Ball Adapter to 3rd party 1”
ball and socket mount. Tighten to 3rd-party
specifications.
Allow alcohol to dry when using included wipe to clean
surfaces for Cable Clips.
The Mount Head magnetically connects to the back of
your phone. Once connected, confirm phone is
charging via phone screen.
WARNING: If not attached correctly, product
and/or phone may dislodge or be thrown
into air in event of crash. Consult your car’s
manual to ensure mount does not cover or
interfere with operation of airbag.
Stay safe. Do not interact with or remove
your phone from the mount while in motion.
!
/