LivePure LP260TH-WT Owner's manual

Brand: LivePure

Model: LP260TH-WT

Type: Owner's manual

This manual is also suitable for

Sierra Series

Premium Tall LED Air Purier

LP260TH

LP260THP

Models

Owner’s Manual

Form #LP260TH

20170915

LivePure LLC. Manufactured exclusively for LivePure

With HEPA and Natural Coconut Carbon Pre-Filter

READ AND SAVE THESE INSTRUCTIONS

Table of Contents

Air Purier Safety

Operation

Maintenance

Product Assistance

Warranty

Introduction

Know Your Air Purier ........................................................ 3

Safety ....................................................................................... 4

Installation Requirements ................................................. 6

Using the Controls ............................................................... 7

Resetting Filter Indicator .................................................... 7

Cleaning Your Air Purier .................................................. 8

Permanent HEPA Filter ....................................................... 9

Replaceable HEPA Filter ................................................... 10

Trouble Shooting ............................................................... 11

Technical Support .............................................................. 12

Filter Ordering ..................................................................... 12

6 Year Guarantee ................................................................. 13

How the System Works:

Introduction

Know Your Air Purier

Air Purier Safety

Safety

Air Purier Safety

Safety

Air Purier Safety

Installation Requirements

Installation Requirements:

Operation

Control Panel Operation

Using the Controls:

1. Power: Press the On/O button

to turn air purier ON or OFF.

2. Accent Light: Press the Accent

Light button to turn the accent

light ON or OFF.

3. Speed/Sleep: Press the

Speed/Sleep button to select

Low, Medium, High or Sleep

Mode. Low provides the best

product sound. Medium oers

moderate cleaning. High provides

strong cleaning power. Sleep

Mode operates on Low until

mode is manually changed.

4. Timer: Press the Timer button to select from 2, 4, or 8 hour timer

settings.

5. Filter Indicator: Press the Filter Indicator button to reset once the

pre-lter and/or lter have been cleaned or replaced, depending on the

model purchased. See instructions on resetting the light below.

Resetting Filter Indicator:

Pre-Filter Indicator Light: After approximately 3 months of use (aver-

age of 12 hours daily use), the pre-lter indicator light will turn red and

icker. After pre-lter is cleaned or replaced, depending on the model

you purchased, press and hold the Filter Indicator button for 3 seconds.

The unit will beep 3 times to indicate reset.

HEPA Filter Indicator Light: After approximately 6 months of use

(average of 12 hours daily use), the HEPA lter indicator light will turn red

and icker. After lter is cleaned or replaced, depending on the model

you purchased, press and hold the Filter Indicator button for 3 seconds.

The unit will beep 3 times to indicate reset.

The air purier is operated by the digital controls located on the air

purier top. This manual covers several dierent models. The air purier

you have purchased may have some or all of the features listed.

Maintenance

Cleaning Your Air Purier

Check and Clean:

NOTE: This guide covers several air purier models. Your model may

have some or all of the features listed. This guide covers both permanent

HEPA lter models and replaceable HEPA lter models. Please see care

section relevant to your model.

Clean unit with a moistened soft cloth only. DO NOT pour or splash

water on the unit or use abrasive-type cleaner on it. Clean all external

surfaces, especially the air intake grills and air outlet.

NOTE: Ensure the air purier is completely dry before plugging into

power outlet and turn ON. Failure to do so could cause damage to the

lters or air purier.

It is necessary to periodically check and clean your air purier. It is

recommended to check the pre-lter monthly and the HEPA lter every 3

months. If the pre-lter is covered in dust and other particles, the

pre-lter needs to be replaced. If the HEPA lter is also covered in dust

and particles, it will need to either be replaced or cleaned by vacuuming.

Please note that even with proper maintenance and cleaning, particles

will build up over time on the HEPA lter and decrease the eciency of

the lter. The HEPA lter is long lasting, but for optimal performance can

be replaced occasionally as needed.

Maintenance

Permanent HEPA Filter

Maintenance

Replaceable HEPA Filter

Product Assistance

Trouble Shooting

Trouble Shooting:

Technical Support:

Filter Ordering:

Product Assistance

Technical Support & Filter Ordering

LP-PF600

LP-HF250

LP-HF250P

Warranty

6 Year Guarantee

Warranty

6 Year Guarantee

LivePure LP260TH-WT Owner's manual

Brand: LivePure

Model: LP260TH-WT

Type: Owner's manual

This manual is also suitable for

Download PDF

report

LivePure LP260TH-WT Owner's manual

This manual is also suitable for

LivePure LP260TH-WT Owner's manual

Other documents