2. Canvas
  3. Wilmer 16-Cube Organizer

Canvas Wilmer 16-Cube Organizer Owner's manual

  • Hello! I'm your chat assistant. I've reviewed the Assembly Instructions document for the CANVAS WILMER 16-CUBE Organizer. I'm ready to help you with any questions and provide help regarding the assembly process, parts, safety measures, weight limits, wall anchoring options and other information from this document.
  • Is this organizer designed to support a television?
    What should I do before moving the organizer?
    What are the weight limits to avoid damage?
    What tools are needed for assembly?
PRODUCT NO. 168-0174-8
WILMER 16-CUBE ORGANIZER
Parts List ............................................................................................................... 4
Before You Begin Assembly ......................................................................... 7
Step-by-step Guide .......................................................................................... 8
Technical Data .................................................................................................... 25
Troubleshooting ................................................................................................ 26
Caring for Your Item ........................................................................................ 26
Warranty ............................................................................................................... 27
Death or serious injury may occur when children climb on storage or organizer
furniture. A remote control or toys placed on the furniture may encourage a
child to climb on the furniture, and as a result, it may tip over onto the child.
• NEVER allow children to climb or play with this product.
• NEVER place toys, food, remote, etc., on top of this product.
•
ALWAYS use either the safety hardware as instructed or other wall-anchoring device.
Placing TVs on furniture that are not designed to support a television is
hazardous, which may result in injury or death.
• This product is not designed to support a television.
Overloading shelves may result in furniture that can break or sag, or tip over
which may result in injury.
• NEVER exceed the weight limits shown in the instructions.
•
Place the heavier items on lower shelves as far back from the front as possible.
• Load the bottom surfaces fi rst to avoid top-heavy furniture.
• Moving furniture that is not designed to be moved or is not equipped with
castors may result in injury or damage to furniture or personal property.
• ALWAYS unload shelves, starting with the top surfaces, before moving.
• NEVER push or pull furniture on carpet. Have a friend help lift properly to
move and/or reposition it.
• This unit must be positioned against wall.
1 personHammer
No. 2 Cross-head Screwdriver
Tip Shown Actual Size
NOTE:
A drill is not recommended; be aware
of over-drilling in order to avoid damage
WILMER 16-CUBE ORGANIZER
3Side Panel 2
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Top panel 1
2Bottom panel 1
4Shelf 2
5Partition 12
6Centre shelf 1
4
WILMER 16-CUBE ORGANIZER
3
1
2
4
5
6
3
4
5
5
5
5
5
5
5
5
5
5
5
5
WILMER 16-CUBE ORGANIZER
CL-bracket 1
ITEM DESCRIPTION THUMBNAIL QUANTITY
ALong wood dowel 18
BShort wood dowel 20
DWall anchor 2
ESticker card 1
FHex key 1
I2 3/8” hex head screw 4
ITEM DESCRIPTION THUMBNAIL QUANTITY
GAdjustable leveller 6
H3 5/16” hex head screw 8
J2” pan head screw 2
K5/8” pan head screw 2
6
WILMER 16-CUBE ORGANIZER
?
7
WILMER 16-CUBE ORGANIZER
Fasten the top panel 1 to one of the side panels 3. Use two hex head screws H.
Tighten with the hex key F.
NOTE: You may want to start each screw a few turns before completely tightening
any of them.
X
H
STEP 1
1X1 3X1 FX1 HX2
X
1X
3
8
These small holes
should be here.
Surface with
more holes
Surface with
more holes
WILMER 16-CUBE ORGANIZER
Insert six short wood dowels B into the holes in top panel 1.
Push three partitions 5 onto the short wood dowels in top panel 1.
STEP 2
5X3 BX6
X
1
X
5
X
5
X
5
X
B
9
WILMER 16-CUBE ORGANIZER
Insert two short wood dowels B into the holes in side panel 3.
Push one of the shelves 4 onto the short wood dowels in side panel 3.
Insert two short wood dowels B into the edge of shelf 4.
STEP 3
4X1 BX4
X
B
X
B
X
4
X
3
10
WILMER 16-CUBE ORGANIZER
Insert six long wood dowels A into the holes in the shelf 4 and into the bottom edges
of the partitions 5.
Then, push three partitions 5 onto the long wood dowels in the shelf 4.
STEP 4
5X3 AX6
X
4
X
5
X
5
X
5
X
5
X
5
X
5
X
A
11
WILMER 16-CUBE ORGANIZER
Fasten the centre shelf 6 to the side panel 3. Use two hex head screws I. Tighten with
the hex key F.
STEP 5
6X1 FX1 IX2
X
3
X
I
X
6
12
WILMER 16-CUBE ORGANIZER
Insert six long wood dowels A into the holes in the centre shelf 6 and into the bottom
edges of the partitions 5.
Then, push three partitions 5 onto the long wood dowels in the centre shelf 6.
STEP 6
5X3 AX6
X
5
X
5
X
5
X
5
X
5
X
5
X
6
X
A
13
WILMER 16-CUBE ORGANIZER
Insert two short wood dowels B into the holes in the side panel 3.
Push shelf 4 onto the short wood dowels in the side panel 3.
Insert two short wood dowels B into the edge of shelf 4.
STEP 7
4X1 BX4
X
B
X
B
X
4
X
3
14
WILMER 16-CUBE ORGANIZER
Insert six long wood dowels A into the holes in the shelf 4 and into the bottom edges
of partitions 5.
Then, push three partitions 5 onto the long wood dowels in shelf 4.
STEP 8
5X3 AX6
X
4
X
5
X
5
X
5
X
5
X
5
X
5
X
A
15
WILMER 16-CUBE ORGANIZER
Fasten the other side panel 3 to the centre shelf 6, using two hex head screws I.
Tighten with the hex key F.
NOTE: Be sure the short wood dowels in the shelves 4 insert into the holes in the end.
Now, fasten the top panel 1 to the side panel 3, using two hex head screws H. Tighten
with the hex key F.
STEP 9
3X1 FX1 HX2 IX2
X
3X
6
X
1
X
I
X
H
16
X
4
X
4
Surface with
fewer holes
WILMER 16-CUBE ORGANIZER
Insert six short wood dowels B into the holes in the partitions 5.
Fasten the bottom panel 2 to the side panels 3, using four hex head screws H. Tighten
with the hex key F.
NOTE: Be sure the short wood dowels in the uprights insert into the holes in the bottom.
STEP 10
2X1 FX1 HX4
BX6
X
5
X
5
X
5
X
3
X
3
X
2
X
B
X
H
17
Surface with
fewer holes
WILMER 16-CUBE ORGANIZER
Completely turn six adjustable levellers G into the exact holes shown in the bottom
panel 2.
NOTE: The adjustable levellers will help stabilize your unit once standing upright.
STEP 11
GX6
X
2
X
G
18
WILMER 16-CUBE ORGANIZER
You have the option to fasten your unit end-to-wall or back-to-wall.
Follow the corresponding steps according to your choice.
STEP 12
END-TO-WALL
Steps 13-14, 17
BACK-TO-WALL
Steps 15-17
19
WILMER 16-CUBE ORGANIZER
Carefully stand your unit upright against the wall in its fi nal location.
The following instructions show your unit being fastened to a wall stud. If you are not
fastening your unit to a wall stud, go to the next step now.
1st -
Fasten the L-bracket C to the small holes on the top surface of the top panel 1
exactly as shown. Use two 5/8” pan head screws K.
2nd - Locate the centre of a stud in your wall near your unit. Mark the two holes in the
L-bracket with a pencil. Drill a 1/8” hole on the mark and into the stud in your wall.
3rd - Fasten the unit to the wall. Use two 2” pan head screws J through the L-bracket
on the top panel 1 and into the 1/8” hole.
STEP 13
20
CX1 KX2
JX2
Use the 5/8” pan head
screws through the
holes in the L-bracket
and into the top.
Mark and drill a 1/8”
hole into the wall.
X
1
X
C
/