PDWM92
Professional VHF Headset Microphone
Pro Audio Wireless Beltpack Mic Transmitter System with Adapter Receiver
www.PyleUSA.com
INSTRUCTIONS
RECEIVER
Belt-Pack Transmitter
HOW TO USE?
1. Open the battery cover of the receiver, put 1AA battery inside the battery compartment. Make sure the “+ -”
polar is correct.
2. Turn ON/OFF switch to ON, the LED indicator is lit. Then insert the 1/4”(6.3mm) Input Jack into audio input
socket, the LED indicator is become brighter after receiving RF signals.
3. Turn ON the transmitter switch, the LED indicator is lit. Now the system is ready to use
Notice:
1. If there is any noise, distortion, dead points when using the this system, it may be caused from low battery,
please replace with new battery.
2. After using it, please turn the switch to “OFF”.
3. If you will not use this system for a long time, please take out the batteries.
Battery Cover 1/4”(6.3mm) input Jack
OFF
ON
LED
ANT
Headset Microphone
Headset Mic input
www.PyleUSA.com
Features:
• Pro Audio Beltpack Microphone System
• Wireless Headset Mic & Receiver Adapter
• VHF Narrow Band Audio Transmitter
• Portable Battery-Operated Design
• Simple Plug-and-Play Operation
• Includes Plug-in Audio Adapter Receiver
• Audio Receiver with 1/4'' -inch (6.3mm) Jack
• Integrated Antenna for Extended Wireless Range
• Auto Search Syncing with Beltpack Transmitter
• Noise-Eliminating SMT Technology
• Integrated Low Noise Circuitry
• Ultra-Wide Frequency Response
• Crisp Audio Clarity for Vocals & Singing
• LED Indicator Light
• Power ON/OFF Switch
• Perfect for Professional Audio Stage & Studio Performances
• Directly Connects to Ampliers, Stereos, Audio Processors, DJ Mixers
• Used for Home Karaoke, Classroom, Oce & Business Applications
Technical Specs:
• Wireless Operation: VHF Band Transmitter
• Microphone Element/Type: Dynamic
• Pickup/Polar Pattern: Uni-Directional
• Audio Transmission: Single Channel Mic
• Wireless Operating Range: Up to 100'+ ft.
• Receiver Connector Type: 1/4'' -inch (6.3mm)
• Headset Mic Connector Type: 3.5mm
• Frequency Stability: 50PPM
• Frequency Response: 60Hz-13kHz
• Receiving Sensitivity: > 12dB (S/N=40dB)
• S/N Ratio: 40dB
• Modulation Mode: FM
• Output Power: 10mW
• Receiver Working Current: <100 mA
• Mic Body Material: Engineered ABS
• Battery Operated Microphone, Requires (1) x '9V’ (Not Included)
• Battery Operated Receiver, Requires (1) x 'AA’ (Not Included)
• Beltpack Transmitter Size (L x W x H): 2.6’’ x 1.1’’ x 4.3’’ -inches
• Mic Receiver Size (L x W x H): 4.5'' x 1.8'’ x 0.9'' -inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: [email protected]
This product can expose you to a chemical or group of checmicals, which
may include ”Lead(Pb)” which is known in the state of California to cause
cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
What's in the Box:
• Wireless Beltpack Transmitter
• Headset Microphone
• Plug-in Adapter Receiver
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pyle PDWM91 Owner's manual
-
Pyle PDWM2120 User manual
-
-
-
-
Pyle PDWMU211 Owner's manual
-
-
-
Pyle UHF Wireless Microphone User manual
-
