Samsung LE32R52BD User manual

Brand: Samsung

Model: LE32R52BD

Category: LCD TVs

Type: User manual

This manual is also suitable for

LE26R52BD

LCD TV

LE26R52BD

LE32R52BD

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

AFTER SALES SERVICE

Do not hesitate to contact your retailer or service agent if a

change in the performance of your product indicates that a

faulty condition may be present.

BN68-00966A-00

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

This device is a Class B digital apparatus.

www.samsung.com/global/register

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European

countries with separate collection systems)

This marking shown on the product or its literature,

indicates that it should not be disposed with other

household wastes at the end of its working life. To prevent possible

harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle

it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they

purchased this product, or their local government office, for details of

where and how they can take this item for environmentally safe

recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract. This product should not be mixed

with other commercial wastes for disposal.

BN68-00966A-00Cover.qxd 10/4/05 3:05 PM Page 1

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

Do not leave the screen in pause mode for

extended periods of time as you may

experience temporary or permanent image

burn.

Note : If there are borders around the

displayed picture (top or sides), then

extended viewing could result in the

border leaving a trace image on the

screen.

Do not leave the screen in pause mode for

extended periods of time as you may

experience temporary or permanent image

burn.

Note : If there are borders around the

displayed picture (top or sides), then

extended viewing could result in the

border leaving a trace image on the

screen.

WARNINGS:

Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is

displayed continuously.

The most common causes of image retention are logos that remain stationary on the TV screen. These logos are

common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still images for long

durations and lower the brightness or contrast settings to decrease the intensity of the picture.

Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may

cause image retention. Always endevour to avoid black borders top or bottom by using the zoom function. This will

help eliminate the black borders and fit the picture to the entire area of the screen.

Using a video game console may cause image retention and is not recommended.

When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast

settings to decrease the intensity of the picture.

IMPORTANT:

Image retention issues are not covered by your Samsung® warranty.

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 2

Do not leave the screen in pause mode for

extended periods of time as you may

experience temporary or permanent image

burn.

Note : If there are borders around the

displayed picture (top or sides), then

extended viewing could result in the

border leaving a trace image on the

screen.

Do not leave the screen in pause mode for

extended periods of time as you may

experience temporary or permanent image

burn.

Note : If the borders at the left, right and the

center of the screen remain fixed for

an extended period of time, the

amount of light transmission will also

remain varied and as a result the

borders may leave traces.

Checking Parts

Sold Separately

D-Sub Cable

DVI Cable

Component Cables

(RCA)

RF Cable

PC Audio Cable

S-VIDEO Cable

Scart Cable

Remote Control/

AAA Batteries

Power Cord

Owner’s Instructions

Cleaning Cloth

Cover-Bottom

Stand / Stand Screw

HDMI Cable

Warranty Card /

Registration Card

Safety Guide

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 3

English-2

Contents

CONNECTING AND

PREPARING YOUR TV

Viewing the Control Panel ............................................................................................................................... 4

Viewing the Connection Panel......................................................................................................................... 5

- Connecting an Aerial or Cable Television Network .................................................................................... 6

- Connecting Component Devices (DVD)..................................................................................................... 6

- Connecting External A/V Devices............................................................................................................... 6

- SERVICE ..................................................................................................................................................... 6

- Connecting Set-Top Box, VCR or DVD ...................................................................................................... 6

- Connecting HDMI/DVI ................................................................................................................................. 7

- Connecting Computer ................................................................................................................................. 7

- Connecting AUDIO...................................................................................................................................... 7

- Kensington Lock .......................................................................................................................................... 7

- Connecting CI (Common Interface) Card................................................................................................... 8

- Service Post................................................................................................................................................. 8

Viewing the Remote Control (All Functions Except Teletext) ......................................................................... 9

Viewing the Remote Control (Teletext Functions) .......................................................................................... 10

Installing Batteries in the Remote Control....................................................................................................... 11

Switching On and Off....................................................................................................................................... 12

Placing Your Television in Standby Mode ....................................................................................................... 12

Becoming Familiar with the Remote Control .................................................................................................. 13

Plug and Play ................................................................................................................................................... 14

Choosing Your Language ................................................................................................................................ 15

SETTING THE CHANNELS

Storing Channels Automatically....................................................................................................................... 16

Storing Channels Manually.............................................................................................................................. 17

Editing the Channels........................................................................................................................................ 19

Sorting the Stored Channels ........................................................................................................................... 20

Assigning Channels Names ............................................................................................................................ 21

Fine Tuning Channel Reception ...................................................................................................................... 22

LNA (Low Noise Amplifier)............................................................................................................................... 23

SETTING THE

PICTURE

Changing the Picture Standard ....................................................................................................................... 24

Adjusting the Custom Picture .......................................................................................................................... 25

Changing the Colour Tone............................................................................................................................... 26

Resetting the Picture Settings to the Factory Defaults ................................................................................... 26

Changing the Picture Size ............................................................................................................................... 27

Freezing the Current Picture ........................................................................................................................... 28

Using the Digital NR (Digital Noise Reduction) Feature................................................................................. 28

DNIe (Digital Natural Image engine) ............................................................................................................... 29

My Colour Control ............................................................................................................................................ 30

Dynamic Contrast............................................................................................................................................. 31

Brightness Sensor............................................................................................................................................ 32

Viewing the Picture In Picture (PIP) ................................................................................................................ 33

SETTING THE SOUND

Adjusting the Volume ....................................................................................................................................... 35

Switching the Sound Off Temporarily .............................................................................................................. 36

Selecting the Sound Mode .............................................................................................................................. 36

Changing the Sound Standard ........................................................................................................................ 37

Adjusting the Sound Settings .......................................................................................................................... 37

Setting the TruSurround XT (SRS TSXT) ...................................................................................................... 38

Adjusting the Volume Automatically ................................................................................................................ 39

Connecting Headphones ................................................................................................................................ 40

Selecting the Internal Mute .............................................................................................................................. 40

Listening to the Sound of the Sub Picture ...................................................................................................... 41

SETTING THE TIME

Setting and Displaying the Current Time ........................................................................................................ 42

Setting the Sleep Timer.................................................................................................................................... 43

Switching the Television On and Off Automatically ........................................................................................ 44

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 2

English-3

Contents

SETTING THE OTHERS

Activating the Child Lock ........................................................................................................................ 45

Setting the Blue Screen Mode ................................................................................................................ 46

Selecting the Melody .............................................................................................................................. 46

Colour Weakness .................................................................................................................................... 47

Selecting a Device from External Sources ............................................................................................ 48

Viewing Pictures from External Sources ................................................................................................ 49

USING THE

DTV FEATURE

Previewing the DTV Menu System ........................................................................................................ 50

Updating the Channel List Automatically................................................................................................ 51

Updating the Channel List Manually ...................................................................................................... 52

Editing Your Favourite Channels ............................................................................................................ 53

Selecting Channel List ............................................................................................................................ 55

Viewing Channel Lists ............................................................................................................................ 55

Displaying Programme Information ........................................................................................................ 56

Viewing the EPG (Electronic Programme Guide) Information .............................................................. 57

Using the Scheduled List ........................................................................................................................ 59

Setting the Default Guide ........................................................................................................................ 60

Viewing All Channels and Favourite Channels ...................................................................................... 61

Selecting Language ................................................................................................................................ 62

Adjusting the Translucency Level .......................................................................................................... 63

Setting up the Parental Lock .................................................................................................................. 64

Setting the Subtitle .................................................................................................................................. 65

Selecting the Preferred Language (Subtitle or Audio) .......................................................................... 66

Viewing Product Information .................................................................................................................. 67

Checking the Signal Information ............................................................................................................ 68

Upgrading the Software (Option) ............................................................................................................ 69

Viewing Common Interface .................................................................................................................... 70

Selecting the CI

(

Common Interface

)

Menu .......................................................................................... 71

Resetting.................................................................................................................................................. 72

SETTING THE PC

Setting up Your PC Software (Based on Windows XP) ........................................................................ 73

Adjusting the PC Screen Automatically .................................................................................................. 74

Coarse and Fine Tuning of the Image.................................................................................................... 75

Changing the Image Position.................................................................................................................. 76

Initializing the Image Settings ................................................................................................................ 77

USING THE TELETEXT FEATURE

Teletext Decoder...................................................................................................................................... 78

Displaying the Teletext Information ........................................................................................................ 78

Selecting a Specific Teletext Page.......................................................................................................... 79

Using Fastext to Select a Teletext Page ................................................................................................ 80

RECOMMENDATIONS FOR USE

Troubleshooting: Before Contacting Service Personnel ........................................................................ 81

Installing the Wall Mount Kit (LE26R52BD)............................................................................................ 82

Installing the Wall Mount Kit (LE32R52BD)............................................................................................ 84

Installing the Stand .................................................................................................................................. 86

Using the Anti-Theft Kensington Lock .................................................................................................. 87

Technical and Environmental Specifications .......................................................................................... 88

Display Mode (PC) .................................................................................................................................. 89

Pin Configurations .................................................................................................................................. 90

Press Important Note

Symbols

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 3

English-4

Viewing the Control Panel

SOURCE

Displays a menu of all of the available input

sources (TV, DTV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI).

In the on-screen menu, use this button as you

use the ENTER button on the remote control.

Press to see an on-screen menu of

your TV’s features.

In case of DTV mode, the DTV menu appears.

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons

as you use the

 and  buttons on the remote

control.

Press to change channels.

In the on-screen menu, use the

buttons as you use the  and  buttons on the

remote control.

(Power)

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

Light Detecting Sensor

Adjusts brightness of screen automatically by

detecting brightness of surrounding

environment. This sensor works when

Brightness Sensor is on.

Remote Control Sensor

Aim the remote control towards this spot

on the TV.

Speakers

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 4

English-5

Viewing the Connection Panel

Whenever you connect an audio or video system to your set, ensure that all elements are

switched of

When connecting an external device, match the color of the connection terminal to the cable.

Power Input

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 5

English-6

Viewing the Connection Panel

Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial

- A cable television network

- A satellite network

Connecting Component Devices (DVD)

- Connect component video cables to component connectors (“PR”, “PB”, “Y”) on the rear of your set and

the other ends to corresponding component video out connectors on the DVD.

- The P

R, PB and Y connectors on your component devices or DVD are sometimes labeled Y, B-Y

and R-Y or Y, Cb and Cr.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to

corresponding audio out connectors on the DVD.

Connecting External A/V Devices

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to

corresponding audio out connectors on the A/V device.

- Headphone may be connected to the headphone output ( ) on the rear of your set. While the

headphone is connected, the sound from the built-in speakers will be disabled.

SERVICE

- Connectors for engineer.

Connecting Set-Top Box, VCR or DVD

- Connect the VCR or DVD SCART cable to the SCART connectors of the VCR or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box

to the VCR (or DVD) and connect the VCR (or DVD) to your set.

Input/Output Specification

Connector

SCART 1 (EXT 1)

SCART 2 (EXT 2)

Video Audio (R/L) S-Video RGB Video+Audio (R/L)

TV/DTV AV

Monitor Out

(TV/DTV AV/Ext. 1/Ext. 2/AV/S-VHS)

Input Output

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 6

English-7

Viewing the Connection Panel

Internal Mute Off

Internal Mute On

Video No Signal

Speaker SCART2 Out & Audio Out

Speaker Output

Mute

DTV-AV,Scart,AV,S-Video

Speaker Output

Mute

Component,PC,HDMI

Speaker Output

Mute

Sound Output

Mute

DTV-AV,Scart,AV,S-Video

Sound Output

Component,PC,HDMI

Sound Output

Connecting HDMI/DVI

- Supports connections between HDMI-connection-enabled AV devices (set top boxes, DVD players and

AV receivers).

- No additional sound connection is needed for a HDMI to HDMI link

What is HDMI?

- HDMI, or high-definition multimedia interface, is a next-generation interface that enables the

transmission of digital audio and video signals using a single cable without compression.

- “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of

digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller

in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and

supports multi - channel digital audio.

- Use the HDMI/DVI terminal for DVI connection to an extended device.

You should use the DVI-to-HDMI cable or DVI-HDMI adapter for the connection, and the

“R - AUDIO - L” terminal on DVI for sound output.

Connecting Computer

- Connect the D-Sub cable to “PC (PC IN)” on the rear of your set and the other end to the D-Sub connector

of the Video Card on your computer.

- Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to

“Audio Out” of the sound card on your computer.

Connecting AUDIO

- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding

Audio In connectors on the Amplifier or DVD Home Theater.

DIGITAL AUDIO OUT (OPTICAL)

- Using an optical digital audio cable, this jack allows you to connect your WIRELESS HOME AV CENTER

to a Home Theater or A/V receiver with an optical digital audio input.

Kensington Lock

- Refer to “Using the Anti-Theft Kensington Lock” on page 87.

< LE26R52BD > < LE32R52BD >

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 7

English-8

TV Rear Panel

- When not inserting “CI Card” in some channels, “Scramble Signal” is displayed on

the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID,

and other information will be displayed in about 2~3 minutes. If an error message is

displayed, please contact your service provider.

- When the channel information configuration has finished, the message "Updating

Completed" is displayed, indicating that the channel list is now updated.

- Connectors for engineer.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since

dropping the CI CARD may cause damage to it.

Viewing the Connection Panel

Service Post

Connecting CI (Common Interface) Card

Please insert

the card as shown

CI Card

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 8

English-9

PIP functions; (

Refer to pages 33~34

)

PIP : PIP On/Off

P / : PIP channel selection

SWAP : Interchange the main and

sub picture

Number buttons for

direct channel access

Electronic Program Guide (EPG) display

Picture freeze

(Refer to page 28)

The performance of the remote control may be affected by bright light.

Automatic Power-off

(Refer to page 43)

Television Standby button

(Refer to page 12)

Selects the TV mode directly

DNIe Demo On/Off

(Refer to page 29)

Temporary sound switch-off

(Refer to page 36)

Displays the main on-screen menu.

(Refer to page 13)

Sound mode selection

(Refer to page 36)

Sound effect selection

(Refer to page 37)

DTV menu display

Digital subtitle display

-Volume increase

-Volume decrease

(Refer to page 35)

Viewing the Remote Control (All Functions Except Teletext)

Previous channel

Selects the DTV mode directly

DTV MHEG menu display

DTV Channel list display

Available source selection

(Refer to page 48)

Use to see information on the

current broadcast.

(Refer to page 42)

Control the cursor in the menu

(Refer to page 13)

Picture effect selection

(Refer to page 24)

Picture size selection

(Refer to page 27)

Exit the OSD

(Refer to page 13)

-Next channel

-Previous channel

(Refer to page 13)

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 9

English-10

Viewing the Remote Control (Teletext Functions)

P : Teletext next page

P : Teletext previous page

Teletext Function : Refer to pages 78-80 for details

Teletext cancel

Teletext hold

Teletext display/Mix both teletext

information and he normal broadcast

Teletext mode selection

LIST/FASTEXT

Teletext reveal

Teletext sub page

Teletext index

Teletext size selection

Teletext store

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 10

English-11

Installing Batteries in the Remote Control

1 Remove the cover on the rear of the remote control by pressing the

symbol ( ) downwards and then pulling firmly to remove it.

2 Install two AAA size batteries.

Make

sure to match the “+” and “–” ends of the batteries with

the diagram inside the compartment.

3 Replace the cover.

Remove the batteries and store them in a cool, dry place

if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work!

Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 11

English-12

Switching On and Off

Your set can be placed in standby mode in order to reduce the power

consumption. The standby mode can be useful when you wish to

interrupt viewing temporarily (during a meal, for example).

1 Press the

POWER

button on the remote control.

Result

The screen is turned off and a red standby indicator

appears on the front of your set.

2 To switch your set back on, simply press the

POWER

, number

buttons (0~9) or channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are

away on holiday, for example).

It is best to unplug the set from the mains and aerial.

The mains lead is attached to the rear of your set.

1 Plug the mains lead into an appropriate socket.

Result

The standby indicator lights up on the front panel.

The main voltage is indicated on the rear of your set and the

frequency is 50 or 60Hz.

2 Press the

POWER

button on the front of the panel.

Result

The programme that you were watching last is reselected

automatically.

3 Press the numeric button (0~9) or channel up/down ( / ) button

on the remote control or button on the right side of

the panel.

4 To switch your set off, press the

POWER

button again.

Placing Your Television in Standby Mode

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 12

English-13

Becoming Familiar with the Remote Control

The remote control is used mainly to:

Change channels and adjust the volume.

Set up your set using the on-screen menu system.

The following table presents the most frequently used buttons and

their functions.

Button Viewing Function Menu Function

Used to display the

next stored channel.

Used to display the

previous stored channel.

to Used to display the corresponding channels.

For double digit channels, the second digit

must be pushed immediately after the first.

Failure to do this will result in a single digit

channel being displayed.

Used to increase the

volume.

Used to decrease the

volume.

MUTE

Used to switch the sound off temporarily.

To turn the sound back on, press this button

again, or press the / button.

Used to display the Used to return to the

on-screen menu system. previous menu or

normal viewing.

EXIT

Used to exit the on-screen menu system.

Used to move among the menu items.

Used to select a menu item or increase

the value of the selected item.

Used to return to the previous menu item or

decrease the value of the selected item.

Used to confirm your

ENTER

choice.

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 13

English-14

Plug and Play

When the set is initially powered ON, several basic customer settings

proceed automatically and subsequently.

The following settings are available.

1 If the set is in standby mode, press the

POWER

button on the

remote control.

Result

: The message

Démarrer Plug & Play

is displayed. It

appears for a little while, and then the

Language

is automatically displayed.

2 Select the appropriate

language

by pressing the or button.

The available languages are listed

You can choose one of 2 languages.

3 Press the

ENTER

button to confirm your choice.

Result: The message

Check antenna input.

is displayed with

the

selected.

4 Press the

ENTER

button.

Result

The

Auto Store

menu is displayed with the Start

selected.

5 Press the

ENTER

button.

Result

The channel search will start and end automatically.

To stop the search before it has finished,

press the

ENTER

button with Stop selected.

6 Press the

ENTER

button.

Select the

Hour

Minute

by pressing the or button.

Set the

Hour

Minute

by pressing the or button.

(Refer to “Setting and Displaying the Current Time” on page 42)

7 Press the

ENTER

button to confirm your setting.

Result

The

message

Enjoy your watching.

is displayed, and

then the channel which has been stored will be activated.

You can also set hour and minute by pressing the number buttons

on the remote control.

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 14

English-15

Plug and Play

Choosing Your Language

If you want to reset this feature...

In the case of DTV mode, Plug&Play can not be selected.

1 Press the

button.

Result

The main menu is displayed.

2 Press the or button to select

Setup

Press the

ENTER

button

Result:

The options available in the

Setup

group are displayed.

The

Plug & Play

is selected.

4 Press the

ENTER

button

Result:

The message

Start Plug & Play

is displayed.

5 For further details on how to set, refer to the previous page.

When you start using your set for the first time, you must select the

language which will be used for displaying menus and indications.

1 Press the

button.

Result

The main menu is displayed.

2 Press the or button to select

Setup

Result

The options available in the

Setup

group are displayed.

3 Press the

ENTER

button

4 Press the or button to select

Language

Press the

ENTER

button

Result:

The available

languages

are listed.

5 Select a particular language by pressing the or button

repeatedly.

Press the

ENTER

button

You can choose one of 2 languages.

6 When you are satisfied with your choice, press the

EXIT

button to

return to normal viewing.

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 15

English-16

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability

depends on your country). Automatically allocated programme numbers

may not correspond to actual or desired programme numbers. However,

you can sort numbers manually and clear any channels you do not wish

to watch.

1 Press the

button.

Result

The main menu is displayed.

2 Press the or button to select

Channel

Result

The options available in the

Channel

group are

displayed.

3 Press the

ENTER

button

4 Press the or button to select

Auto Store

Press the

ENTER

button

Result: The Auto Store menu is displayed with the Start selected.

5 Press the

ENTER

button to search the channels. The sub menu

is changed from

Start

Stop

with channel search started.

Result

: The search will end automatically. Channels are sorted

and stored in an order which reflects their position in the

frequency range (with lowest first and highest last).

The programme originally selected is then displayed.

To return to the previous menu, press the MENU button.

To stop the search before it has finished,

press the

ENTER

button with Stop selected.

6 When searching and storing are complete, the Sort menu is

displayed.

To sort the stored channels into the desired numerical order,

go to step 4 of the “Sorting the Stored Channels”

procedure on page 20.

To exit from the channel store function without sorting the

channels, press the MENU( ) button repeatedly until the

menus disappear

7 When the channels have been stored, you can:

Sort them in the order required (refer to page 20)

Assign names to the stored channels (refer to page 21)

Add or delete the channels (refer to page 19)

Fine tune channel reception if necessary (refer to page 22)

Activate/deactivate the LNA (Low Noise Amplifier) feature

(See page 23)

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 16

English-17

You can store up to 100 channels, including those received via cable

networks. When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you

wish to identify.

1 Press the

button.

Result

The main menu is displayed.

2 Press the or button to select

Channel

Result:

The options available in the

Channel

group are

displayed.

3 Press the

ENTER

button

4 Press the or button

select

Manual Store

Press the

ENTER

button.

Result

: The options available in the

Manual Store

menu are

displayed with

Programme

selected.

5 Press the

ENTER

button again.

To assign a programme number to a channel, find the correct

number by pressing the or button and then press the

ENTER

button

You can also set a programme number by pressing number

buttons on the remote control.

6 Press the or button to select

Colour System

and then press

the

ENTER

button.

Select the

colour

standard required by pressing the or button

repeatedly and then press the

ENTER

button.

Result

: The colour standards are displayed in the following order:

AUTO - PAL - SECAM - NTSC 4.43

7 Press the or button to select

Sound System

and then press

the

ENTER

button.

Select the sound standard required by pressing the or button

repeatedly and then press the

ENTER

button.

Result

: The sound standards are displayed in the following order:

BG - DK - I - L

8 For all the channels to move to the required channel numbers,

repeat steps 5 to 7 after selecting

Programme

by pressing

the

or button

Storing Channels Manually

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 17

English-18

9 If you know the number of the channel to be stored,

Press the or button to select

Channel

and then press the

ENTER

button.

Select C (Air channel) or S (Cable channel) by pressing the

or button.

Press the button to select channel.

Select the required number by pressing the or button and

then press the

ENTER

button.

If there is an abnormal sound or no sound, re-select the sound

system required.

You can also set a

channel

by pressing number buttons on the

remote control.

10 If you do not know the channel numbers, press the or button

to select

and then press the

ENTER

button.

by pressing

the

or button and then press the

ENTER

button.

Result

: The tuner scans the frequency range until the first

channel or the channel that you selected is received on

your screen.

11 Press the or button to select

Store

Select

by pressing the

ENTER

button.

Result

: The channel and associated programme number are

stored.

12 Repeat steps 9 to 11 for each channel to be stored.

13 Press the

button to return to the previous menu or press

the

EXIT

button to return to normal viewing.

Channel mode

(Programme mode): When tuning is completed, the

broadcasting stations in your area will have been assigned

to position numbers from P00 to P99. You can select a

channel by entering the position number in this mode.

C (Real channel mode): You can select a channel by

entering the assigned number to each broadcast station in

this mode.

S (Cable channel mode): You can select a channel by

entering the assigned number to each cable channel in this

mode.

Storing Channels Manually

01 BN68-00966A-00Eng.qxd 10/4/05 3:06 PM Page 18

Page is loading ...

Samsung LE32R52BD User manual

Brand: Samsung

Model: LE32R52BD

Category: LCD TVs

Type: User manual

This manual is also suitable for

LE26R52BD

Download PDF

report

Samsung LE32R52BD User manual

This manual is also suitable for

Samsung LE32R52BD User manual

Related papers

Other documents